Re: RAID b/w GPT and NON GPT partition.

[Gary Dale <garydale@torfree.net>]

On 01/07/15 02:43 AM, Muhammad Yousuf Khan wrote:
> Partition is created and grub is installed as instructed in the thread.
> Also Grub is installed now.
>
> should i make any config changes ( or not )in the /boot/grub/ directory?
>
> Number  Start (sector)    End (sector)  Size       Code  Name
>    1            2048         7813119   3.7 GiB     FD00  Linux RAID
>    2              34            2047   1007.0 KiB  EF02  BIOS boot 
> partition
>    3        27344896      1980469247   931.3 GiB   FD00  Linux RAID
>    4      1980469248      2930276351   452.9 GiB   FD00  Linux RAID
>    5         7815168        27344895   9.3 GiB     FD00  Linux RAID
> root@nasbox:~# grub-install /dev/sdb
> Installation finished. No error reported.
Short answer is no.

After you have added the various RAID partitions into your arrays, you 
need to do two things:
- update-initramfs -u
- update-grub

Then your system should be OK for now, providing that neither disk fails 
during the rebuild.