RE: multiple outbound NAT
Hi Igor,
>> [...]
>> Due to several reasons I now have to use more than 1 outbound ip address to make clear from which internal segment the traffic is coming from.
>> So traffic coming from 172.16.20.0/24 needs to use $WORLD_IP1
>> And traffic coming from 172.16.22.0/24 needs to use $WORLD_IP2
>> And maybe traffic coming from 172.16.24.0/23 needs to use $WORLD_IP3
>>
>> How do I configure something like that?
>> If it is any use in this case, I have quagga on that machine as well but so far that is used to do routing for the internal network.
>> But I'd rather not mess with that config.
>>
> Maybe with source rules routing, there are lots of resources on the net to get you going
> example http://www.linuxhorizon.ro/iproute2.html
Thanks that helps a bit too. Still not sure how to do it all, might need to build a test lab, unfortunately that means at least 4 VMs for basic testing. Setting it up is going to take some.
Bonno Bloksma
Reply to: