My new external USB HDD can't write and show error
Hi all.
I got a new external USB shell for HDD. But when I mount with write
property, it will unmount immediately.
Only once write successful , it happened when I show this problem for
technicist to change now one ..........
there is something message :
items:
external USB shell : SilverStone TS-10B (JMicron jms567 )
HDD：Seagate Momentus Thin 320GB (ST320LT007)
filesystem: XFS
OS: debian stable/testing(up to date) / mint
dmesg:
[ 7219.357715] usb 1-1: new high-speed USB device number 4 using ehci-pci
[ 7219.547797] usb 1-1: New USB device found, idVendor=152d, idProduct=0567
[ 7219.547814] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 7219.547822] usb 1-1: Product: USB to ATA/ATAPI Bridge
[ 7219.547829] usb 1-1: Manufacturer: JMicron
[ 7219.547836] usb 1-1: SerialNumber: 70135A20
[ 7219.549866] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 7219.550538] scsi2 : usb-storage 1-1:1.0
[ 7220.551917] scsi 2:0:0:0: Direct-Access JMicron Generic
0114 PQ: 0 ANSI: 6
[ 7220.553267] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7220.559692] sd 2:0:0:0: [sdb] Spinning up disk...
[ 7221.561843] ...ready
[ 7223.578769] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320
GB/298 GiB)
[ 7223.579887] sd 2:0:0:0: [sdb] Write Protect is off
[ 7223.579899] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 7223.581985] sd 2:0:0:0: [sdb] Write cache: enabled, read cache:
enabled, supports DPO and FUA
[ 7223.638861] sdb: sdb1 sdb2
[ 7223.643997] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 7229.734938] XFS (sdb2): Mounting Filesystem
[ 7230.123529] XFS (sdb2): Ending clean mount
[ 7260.726381] sd 2:0:0:0: [sdb] Invalid command failure
[ 7260.726399] sd 2:0:0:0: [sdb]
[ 7260.726406] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7260.726413] sd 2:0:0:0: [sdb]
[ 7260.726418] Sense Key : Illegal Request [current]
[ 7260.726430] sd 2:0:0:0: [sdb]
[ 7260.726438] Add. Sense: Invalid field in cdb
[ 7260.726445] sd 2:0:0:0: [sdb] CDB:
[ 7260.726450] Write(10): 2a 08 15 9c 73 67 00 00 05 00
[ 7260.726473] end_request: critical target error, dev sdb, sector 362574695
[ 7260.726487] end_request: critical target error, dev sdb, sector 362574695
[ 7260.726534] XFS (sdb2): metadata I/O error: block 0xfa68056
("xlog_iodone") error 121 numblks 64
[ 7260.726547] XFS (sdb2): xfs_do_force_shutdown(0x2) called from line
1170 of file /build/linux-Zc5oK7/linux-3.14.4/fs/xfs/xfs_log.c. Return
address = 0xffffffffa01baa01
[ 7260.726581] XFS (sdb2): Log I/O Error Detected. Shutting down filesystem
[ 7260.726587] XFS (sdb2): Please umount the filesystem and rectify the
problem(s)
[ 7290.301773] XFS (sdb2): xfs_log_force: error 5 returned.
--------------------------------------------------------
I did xfs_repair/check , but it can't help, and that HDD work well in
other external USB shell.
what do you think ? Because NTFS didn't show error , I worry NTFS can't
detect it .
Thank you.
Reply to: