Re: Marvel controller gives errors Squeeze
On 02/07/2012 16:26, Camaleón wrote:
Is ata2 your hdd? Run "dmesg | grep -i ata2" to find out.
ata8 is my HDD
[ 0.888232] ata8: SATA max UDMA/133 abar m2048@0xf7fff800 port
0xf7fff980 irq 36
[ 1.371432] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 370)
[ 1.375914] ata8.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
[ 1.375919] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth
31/32), AA
[ 1.380941] ata8.00: configured for UDMA/133
[ 36.917447] ata8.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6
frozen
[ 36.917470] ata8.00: failed command: READ FPDMA QUEUED
On boot i receive a message that my Marvel controller on my mobo can
only handle 2.5Gb/s so ASUS has given the incorrect specs for this mobo
selling it as 6Gb/s but dmesg seems to give 6Gb/s, so i don't know
what's what.
It's a ASUS P7H55-M/USB3 mobo.
--
Cheers
Mark
Reply to: