Re: Marvel controller gives errors Squeeze

[Mark Panen <mark.panen@gmail.com>]

On 01/07/2012 18:11, Camaleón wrote:
> Is ata2 your hdd? Run "dmesg | grep -i ata2" to find out.
yes looks like it:

[    0.900101] ata2: SATA max UDMA/133 abar m2048@0xf3ff7000 port 
0xf3ff7180 irq 35
[    1.722809] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

Am i right it's only working at 1.5 Gbps when it should be 6 Gbps?

hdparm -tT /dev/sda

/dev/sda:
 Timing cached reads:   20022 MB in  2.00 seconds = 10021.38 MB/sec
 Timing buffered disk reads: 368 MB in  3.10 seconds = 118.71 MB/sec

Would this be right or must i run hdparm on the / directory?

Cheers
Mark