Re: converting apple quicktime to mpeg
On Tue, 31 May 2011, Ron Johnson wrote:
The mplayer.log file displayed as a couple of dozen garbled bytes.
The log has 66 text lines, followed by the "garbled bytes"
written while mplayer is reading the input file, but you can
display the whole file correctly with more.
(vi displays correctly only the text lines)
Anyway, I extracted the text lines to mplayer.out (attached file)
best regards,
--
Pierre Frenkiel
MPlayer SVN-r31918 (C) 2000-2010 MPlayer Team
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing file.mov.
TS file format detected.
PROGRAM_ID=1 (0x01), PMT_PID: 66(0x42)
PROGRAM_ID=1 (0x01), PMT_PID: 66(0x42)
PROGRAM_ID=1 (0x01), PMT_PID: 66(0x42)
PROGRAM_ID=1 (0x01), PMT_PID: 66(0x42)
PROGRAM_ID=1 (0x01), PMT_PID: 66(0x42)
PROGRAM_ID=1 (0x01), PMT_PID: 66(0x42)
VIDEO MPEG2(pid=164) AUDIO MPA(pid=96) NO SUBS (yet)! PROGRAM N. 1
ID_VIDEO_ID=164
ID_AUDIO_ID=96
ID_AID_96_LANG=fra
ID_AUDIO_ID=97
ID_AID_97_LANG=eng
PROGRAM_ID=1 (0x01), PMT_PID: 66(0x42)
VIDEO: MPEG2 720x576 (aspect 2) 25.000 fps 0.0 kbps ( 0.0 kbyte/s)
ID_FILENAME=file.mov
ID_DEMUXER=mpegts
ID_VIDEO_FORMAT=0x10000002
ID_VIDEO_BITRATE=0
ID_VIDEO_WIDTH=720
ID_VIDEO_HEIGHT=576
ID_VIDEO_FPS=25.000
ID_VIDEO_ASPECT=0.0000
ID_AUDIO_FORMAT=80
ID_AUDIO_BITRATE=0
ID_AUDIO_RATE=0
ID_AUDIO_NCH=0
ID_START_TIME=28688.57
ID_LENGTH=0.00
ID_SEEKABLE=1
ID_CHAPTERS=0
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] This driver only supports the 3Dfx Banshee, Voodoo3 and Voodoo 5.
s3fb: Couldn't map S3 registers: Operation not permitted
Xlib: extension "NV-GLX" missing on display ":0.0".
[vdpau] Error when calling vdp_device_create_x11: 1
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
ID_VIDEO_CODEC=ffmpeg2
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 192.0 kbit/12.50% (ratio: 24000->192000)
ID_AUDIO_BITRATE=192000
ID_AUDIO_RATE=48000
ID_AUDIO_NCH=2
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
ID_AUDIO_CODEC=mp3
Starting playback...
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
ID_VIDEO_ASPECT=1.3333
VO: [xv] 720x576 => 768x576 Planar YV12
Reply to: