Re: Another mouse issue+Xorg after upgrade
- To: debian-user@lists.debian.org
- Subject: Re: Another mouse issue+Xorg after upgrade
- From: ZephyrQ <ZephyrQ@sbcglobal.net>
- Date: Thu, 31 Mar 2011 20:52:12 -0500
- Message-id: <[🔎] 4D952FCC.7090800@sbcglobal.net>
- In-reply-to: <20110331064517.GU24631@think.homelan>
- References: <4D911678.2090701@sbcglobal.net> <20110329120154.GE19171@think.homelan> <4D93F05B.5090302@sbcglobal.net> <20110331064517.GU24631@think.homelan>
On 03/31/2011 01:45 AM, Andrei Popescu wrote:
> On Mi, 30 mar 11, 22:09:15, ZephyrQ wrote:
>>
>> Is it that the boot-up is not reading it?
>
> Please boot, count to ten, replug your mouse and then post the full
> output of 'dmesg'.
>
> Did you already replug the mouse? Because I see this:
>
>> (II) config/udev: Adding input device Logitech Trackball
>> (/dev/input/event5)
>> (**) Logitech Trackball: Applying InputClass "evdev pointer catchall"
>> (**) Logitech Trackball: always reports core events
>> (**) Logitech Trackball: Device: "/dev/input/event5"
>> (II) Logitech Trackball: Found 3 mouse buttons
>> (II) Logitech Trackball: Found scroll wheel(s)
>> (II) Logitech Trackball: Found relative axes
>> (II) Logitech Trackball: Found x and y relative axes
>> (II) Logitech Trackball: Configuring as mouse
>> (**) Logitech Trackball: YAxisMapping: buttons 4 and 5
>> (**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10,
>> EmulateWheelTimeout: 200
>> (II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
>> (II) Logitech Trackball: initialized for relative axes.
>
> Is your "mouse" a Trackball? Later:
Yes, it is. The same I've used through 3 stable releases. (not the same
physical trackball, but I've used the same brand/type for years...)
>> (II) config/udev: Adding input device Logitech Trackball (/dev/input/mouse0)
>> (II) No input driver/identifier specified (ignoring)
>
> which might be related to your problem. Please attach the full xorg.conf
> used.
Xorg.conf first, then after full output of dmesg:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (pbuilder@windlord) Sun Jun 13 06:03:17
UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
~~~~~~~~~~~~~~~~~~~
Now dmesg output:
~~~~~~~~~~~~~~~~~~~
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-31)
(ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue
Mar 8 21:36:00 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working
around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 377cf000 - 37fefbd0
[ 0.000000] Allocated new RAMDISK: 00100000 - 00920bd0
[ 0.000000] Move RAMDISK from 00000000377cf000 - 0000000037fefbcf to
00100000 - 00920bcf
[ 0.000000] ACPI: RSDP 000f7b60 00014 (v00 GATEWA)
[ 0.000000] ACPI: RSDT 7fee3000 0003C (v01 GATEWA SYSTEM 42302E31
AWRD 00000000)
[ 0.000000] ACPI: FACP 7fee3080 00074 (v01 GATEWA SYSTEM 42302E31
AWRD 00000000)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero
address or length: 0000000000000000/1 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 7fee3100 0571E (v01 Mouse SYSTEM 00001000
MSFT 03000000)
[ 0.000000] ACPI: FACS 7fee0000 00040
[ 0.000000] ACPI: SSDT 7fee8900 00178 (v01 123456 123346 00000001
LTP 00000001)
[ 0.000000] ACPI: HPET 7fee8a80 00038 (v01 GATEWA SYSTEM 42302E31
AWRD 00000098)
[ 0.000000] ACPI: SLIC 7fee8ac0 00176 (v01 GATEWA SYSTEM 42302E31
AWRD 00000001)
[ 0.000000] ACPI: MCFG 7fee8c40 0003C (v01 GATEWA SYSTEM 42302E31
AWRD 00000000)
[ 0.000000] ACPI: APIC 7fee8840 00098 (v01 GATEWA SYSTEM 42302E31
AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1162MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014cabb4] TEXT DATA BSS ==>
[0001000000 - 00014cabb4]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==>
[000009f800 - 0000100000]
[ 0.000000] #5 [00014cb000 - 00014d10e7] BRK ==>
[00014cb000 - 00014d10e7]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==>
[0000010000 - 0000012000]
[ 0.000000] #7 [0000100000 - 0000920bd0] NEW RAMDISK ==>
[0000100000 - 0000920bd0]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==>
[0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f3b20] f3b20
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523887
[ 0.000000] free_area_init_node: node 0, pgdat c13b28a0, node_mem_map
c14d3200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2326 pages used for memmap
[ 0.000000] HighMem zone: 295372 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap:
7ff00000:70100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34328 r0 d23016
u1048576
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 519793
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=b9afb61a-0865-46c6-9977-bf803b73322b ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007fee0)
[ 0.000000] Memory: 2063656k/2096000k available (2503k kernel code,
30732k reserved, 1321k data, 380k init, 1190792k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bd000 - 0xc141c000 ( 380 kB)
[ 0.000000] .data : 0xc1271cc1 - 0xc13bc4c0 (1321 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1271cc1 (2503 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2712.295 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5424.59 BogoMIPS (lpj=10849180)
[ 0.004019] Security Framework initialized
[ 0.004023] SELinux: Disabled at boot.
[ 0.004029] Mount-cache hash table entries: 512
[ 0.004127] Initializing cgroup subsys ns
[ 0.004130] Initializing cgroup subsys cpuacct
[ 0.004133] Initializing cgroup subsys devices
[ 0.004135] Initializing cgroup subsys freezer
[ 0.004137] Initializing cgroup subsys net_cls
[ 0.004153] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004155] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004158] mce: CPU supports 5 MCE banks
[ 0.004166] using C1E aware idle routine
[ 0.004172] Performance Events: AMD PMU driver.
[ 0.004176] ... version: 0
[ 0.004178] ... bit width: 48
[ 0.004179] ... generic registers: 4
[ 0.004181] ... value mask: 0000ffffffffffff
[ 0.004182] ... max period: 00007fffffffffff
[ 0.004184] ... fixed-purpose events: 0
[ 0.004185] ... event mask: 000000000000000f
[ 0.004188] Checking 'hlt' instruction... OK.
[ 0.020219] SMP alternatives: switching to UP code
[ 0.022722] ACPI: Core revision 20090903
[ 0.028061] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028601] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.068583] CPU0: AMD Athlon(tm) Processor LE-1640 stepping 02
[ 0.072001] Brought up 1 CPUs
[ 0.072001] Total of 1 processors activated (5424.59 BogoMIPS).
[ 0.072001] CPU0 attaching NULL sched-domain.
[ 0.072001] devtmpfs: initialized
[ 0.072001] regulator: core version 0.5
[ 0.072001] NET: Registered protocol family 16
[ 0.072001] ACPI: bus type pci registered
[ 0.072001] PCI: MCFG configuration 0: base f0000000 segment 0 buses
0 - 63
[ 0.072001] PCI: MCFG area at f0000000 reserved in E820
[ 0.072001] PCI: Using MMCONFIG for extended config space
[ 0.072001] PCI: Using configuration type 1 for base access
[ 0.072001] bio: create slab <bio-0> at 0
[ 0.072001] ACPI: EC: Look up EC in DSDT
[ 0.073944] ACPI: Interpreter enabled
[ 0.073947] ACPI: (supports S0 S3 S4 S5)
[ 0.073964] ACPI: Using IOAPIC for interrupt routing
[ 0.079756] ACPI: No dock devices found.
[ 0.080697] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.080862] pci 0000:00:01.0: reg 18 io port: [0x1d00-0x1dff]
[ 0.080891] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
[ 0.080900] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.080904] pci 0000:00:01.1: reg 24 io port: [0xf400-0xf43f]
[ 0.080921] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.080926] pci 0000:00:01.1: PME# disabled
[ 0.080967] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.080986] pci 0000:00:02.0: supports D1 D2
[ 0.080987] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.080990] pci 0000:00:02.0: PME# disabled
[ 0.081009] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.081032] pci 0000:00:02.1: supports D1 D2
[ 0.081034] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.081036] pci 0000:00:02.1: PME# disabled
[ 0.081089] pci 0000:00:05.0: reg 10 32bit mmio: [0xfe024000-0xfe027fff]
[ 0.081111] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.081114] pci 0000:00:05.0: PME# disabled
[ 0.081143] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f]
[ 0.081173] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.081176] pci 0000:00:07.0: reg 14 io port: [0xec00-0xec07]
[ 0.081194] pci 0000:00:07.0: supports D1 D2
[ 0.081196] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.081200] pci 0000:00:07.0: PME# disabled
[ 0.081217] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.081220] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.081223] pci 0000:00:08.0: reg 18 io port: [0x970-0x977]
[ 0.081227] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73]
[ 0.081230] pci 0000:00:08.0: reg 20 io port: [0xd800-0xd80f]
[ 0.081233] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.081258] pci 0000:00:08.1: reg 10 io port: [0x9e0-0x9e7]
[ 0.081261] pci 0000:00:08.1: reg 14 io port: [0xbe0-0xbe3]
[ 0.081264] pci 0000:00:08.1: reg 18 io port: [0x960-0x967]
[ 0.081267] pci 0000:00:08.1: reg 1c io port: [0xb60-0xb63]
[ 0.081271] pci 0000:00:08.1: reg 20 io port: [0xc400-0xc40f]
[ 0.081274] pci 0000:00:08.1: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.081314] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.081317] pci 0000:00:09.0: PME# disabled
[ 0.081344] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.081346] pci 0000:00:0b.0: PME# disabled
[ 0.081374] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.081376] pci 0000:00:0c.0: PME# disabled
[ 0.081462] pci 0000:01:06.0: reg 10 io port: [0xbc00-0xbcff]
[ 0.081492] pci 0000:01:06.0: PME# supported from D3hot D3cold
[ 0.081495] pci 0000:01:06.0: PME# disabled
[ 0.081523] pci 0000:00:04.0: transparent bridge
[ 0.081525] pci 0000:00:04.0: bridge io port: [0xb000-0xbfff]
[ 0.081528] pci 0000:00:04.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.081531] pci 0000:00:04.0: bridge 32bit mmio pref:
[0xfdd00000-0xfddfffff]
[ 0.081552] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.081559] pci 0000:02:00.0: reg 14 64bit mmio pref:
[0xe0000000-0xefffffff]
[ 0.081565] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.081569] pci 0000:02:00.0: reg 24 io port: [0xac00-0xac7f]
[ 0.081574] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[ 0.088048] pci 0000:00:09.0: bridge io port: [0xa000-0xafff]
[ 0.088050] pci 0000:00:09.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.088053] pci 0000:00:09.0: bridge 64bit mmio pref:
[0xe0000000-0xefffffff]
[ 0.088084] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff]
[ 0.088086] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[ 0.088089] pci 0000:00:0b.0: bridge 64bit mmio pref:
[0xfdb00000-0xfdbfffff]
[ 0.088119] pci 0000:00:0c.0: bridge io port: [0x8000-0x8fff]
[ 0.088122] pci 0000:00:0c.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
[ 0.088125] pci 0000:00:0c.0: bridge 64bit mmio pref:
[0xfd900000-0xfd9fffff]
[ 0.088132] pci_bus 0000:00: on NUMA node 0
[ 0.088136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.088279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.124922] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.125049] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
[ 0.125173] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.125298] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.125423] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.125548] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.125673] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.125799] ACPI: PCI Interrupt Link [LNK8] (IRQs *5 7 9 10 11 14 15)
[ 0.125923] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.126048] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.126174] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[ 0.126309] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.126435] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.126560] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
[ 0.126686] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[ 0.126812] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 0.126937] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.127063] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.127194] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[ 0.127355] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.127510] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.127663] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.127818] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.127972] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.128135] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.128289] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.128444] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
[ 0.128598] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0, disabled.
[ 0.128753] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 0.128908] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 0.129063] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0
[ 0.129218] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0
[ 0.129376] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0
[ 0.129531] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 0.129686] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 0.129841] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 0.129996] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0
[ 0.130151] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0
[ 0.130238] vgaarb: device added:
PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.130240] vgaarb: loaded
[ 0.130290] PCI: Using ACPI for IRQ routing
[ 0.130399] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.130405] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.130409] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.136021] Switching to clocksource hpet
[ 0.136883] pnp: PnP ACPI init
[ 0.136897] ACPI: bus type pnp registered
[ 0.139841] pnp: PnP ACPI: found 11 devices
[ 0.139842] ACPI: ACPI bus type pnp unregistered
[ 0.139845] PnPBIOS: Disabled by ACPI PNP
[ 0.139854] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.139857] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.139859] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.139862] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.139864] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.139867] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.139869] system 00:01: ioport range 0x2000-0x207f has been reserved
[ 0.139872] system 00:01: ioport range 0x2080-0x20ff has been reserved
[ 0.139876] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.139879] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.139881] system 00:02: ioport range 0x290-0x30f has been reserved
[ 0.139884] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.139890] system 00:09: iomem range 0xf0000000-0xf3ffffff has been
reserved
[ 0.139894] system 00:0a: iomem range 0xf0000-0xfffff could not be
reserved
[ 0.139897] system 00:0a: iomem range 0xfeff0000-0xfeff00ff has been
reserved
[ 0.139899] system 00:0a: iomem range 0x7fee0000-0x7fefffff could not
be reserved
[ 0.139902] system 00:0a: iomem range 0xffff0000-0xffffffff has been
reserved
[ 0.139905] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.139907] system 00:0a: iomem range 0x100000-0x7fedffff could not
be reserved
[ 0.139910] system 00:0a: iomem range 0xfec00000-0xfec00fff could not
be reserved
[ 0.139913] system 00:0a: iomem range 0xfee00000-0xfeefffff has been
reserved
[ 0.139916] system 00:0a: iomem range 0xfefff000-0xfeffffff has been
reserved
[ 0.139918] system 00:0a: iomem range 0xfff80000-0xfff80fff has been
reserved
[ 0.139921] system 00:0a: iomem range 0xfff90000-0xfffbffff has been
reserved
[ 0.139924] system 00:0a: iomem range 0xfffed000-0xfffeffff has been
reserved
[ 0.174588] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
[ 0.174591] pci 0000:00:04.0: IO window: 0xb000-0xbfff
[ 0.174594] pci 0000:00:04.0: MEM window: 0xfde00000-0xfdefffff
[ 0.174597] pci 0000:00:04.0: PREFETCH window: 0xfdd00000-0xfddfffff
[ 0.174602] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.174604] pci 0000:00:09.0: IO window: 0xa000-0xafff
[ 0.174607] pci 0000:00:09.0: MEM window: 0xf8000000-0xfbffffff
[ 0.174609] pci 0000:00:09.0: PREFETCH window:
0x000000e0000000-0x000000efffffff
[ 0.174612] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[ 0.174615] pci 0000:00:0b.0: IO window: 0x9000-0x9fff
[ 0.174617] pci 0000:00:0b.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.174620] pci 0000:00:0b.0: PREFETCH window:
0x000000fdb00000-0x000000fdbfffff
[ 0.174623] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.174625] pci 0000:00:0c.0: IO window: 0x8000-0x8fff
[ 0.174627] pci 0000:00:0c.0: MEM window: 0xfda00000-0xfdafffff
[ 0.174630] pci 0000:00:0c.0: PREFETCH window:
0x000000fd900000-0x000000fd9fffff
[ 0.174637] pci 0000:00:04.0: setting latency timer to 64
[ 0.174641] pci 0000:00:09.0: setting latency timer to 64
[ 0.174645] pci 0000:00:0b.0: setting latency timer to 64
[ 0.174648] pci 0000:00:0c.0: setting latency timer to 64
[ 0.174652] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.174654] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.174656] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.174659] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.174661] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff]
[ 0.174663] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.174665] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.174668] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.174670] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.174672] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.174675] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff]
[ 0.174677] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
[ 0.174679] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[ 0.174681] pci_bus 0000:04: resource 0 io: [0x8000-0x8fff]
[ 0.174684] pci_bus 0000:04: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.174686] pci_bus 0000:04: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.174713] NET: Registered protocol family 2
[ 0.174786] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.175050] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.175643] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.175930] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.175932] TCP reno registered
[ 0.176038] NET: Registered protocol family 1
[ 0.192060] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.192104] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.192156] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.192206] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.192257] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.192311] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.192368] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.192429] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.192442] pci 0000:02:00.0: Boot video device
[ 0.192483] Unpacking initramfs...
[ 0.363269] Freeing initrd memory: 8322k freed
[ 0.367703] audit: initializing netlink socket (disabled)
[ 0.367715] type=2000 audit(1301599088.364:1): initialized
[ 0.370291] highmem bounce pool size: 64 pages
[ 0.370294] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.371274] VFS: Disk quotas dquot_6.5.2
[ 0.371315] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.371368] msgmni has been set to 1723
[ 0.371498] alg: No test for stdrng (krng)
[ 0.371535] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.371538] io scheduler noop registered
[ 0.371539] io scheduler anticipatory registered
[ 0.371541] io scheduler deadline registered
[ 0.371565] io scheduler cfq registered (default)
[ 0.371639] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
[ 0.371643] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.371696] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
[ 0.371699] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.371750] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
[ 0.371753] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.371849] isapnp: Scanning for PnP cards...
[ 0.724522] isapnp: No Plug & Play device found
[ 0.725520] Linux agpgart interface v0.103
[ 0.725702] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.725946] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.725948] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.726078] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.726131] mice: PS/2 mouse device common for all mice
[ 0.726172] rtc_cmos 00:05: RTC can wake from S4
[ 0.726199] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.726234] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.726242] cpuidle: using governor ladder
[ 0.726244] cpuidle: using governor menu
[ 0.726247] No iBFT detected.
[ 0.726545] TCP cubic registered
[ 0.726648] NET: Registered protocol family 10
[ 0.727279] Mobile IPv6
[ 0.727281] NET: Registered protocol family 17
[ 0.727293] Using IPI No-Shortcut mode
[ 0.727342] PM: Resume from disk failed.
[ 0.727351] registered taskstats version 1
[ 0.727599] rtc_cmos 00:05: setting system clock to 2011-03-31
19:18:09 UTC (1301599089)
[ 0.727627] Initalizing network drop monitor service
[ 0.727649] Freeing unused kernel memory: 380k freed
[ 0.727875] Write protecting the kernel text: 2504k
[ 0.727891] Write protecting the kernel read-only data: 920k
[ 0.740863] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.744172] udev[46]: starting version 164
[ 0.912940] usbcore: registered new interface driver usbfs
[ 0.913046] usbcore: registered new interface driver hub
[ 0.913151] usbcore: registered new device driver usb
[ 0.915185] SCSI subsystem initialized
[ 0.935653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.935927] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.935937] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22
(level, low) -> IRQ 22
[ 0.935954] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.935956] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.935975] ehci_hcd 0000:00:02.1: new USB bus registered, assigned
bus number 1
[ 0.936018] ehci_hcd 0000:00:02.1: debug port 1
[ 0.936025] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.936042] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 0.936331] ACPI Warning for \_TZ_.THRM._PSL: Return Package type
mismatch at index 0 - found [NULL Object Descriptor], expected Reference
(20090903/nspredef-1012)
[ 0.936337] ACPI: Expecting a [Reference] package element, found type 0
[ 0.936376] ACPI: Invalid passive threshold
[ 0.936907] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.936913] ACPI: Thermal Zone [THRM] (40 C)
[ 0.940390] libata version 3.00 loaded.
[ 0.943749] fan PNP0C0B:00: registered as cooling_device0
[ 0.943754] ACPI: Fan [FAN] (on)
[ 0.948014] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.948042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.948044] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.948046] usb usb1: Product: EHCI Host Controller
[ 0.948048] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 0.948050] usb usb1: SerialNumber: 0000:00:02.1
[ 0.948114] usb usb1: configuration #1 chosen from 1 choice
[ 0.948137] hub 1-0:1.0: USB hub found
[ 0.948143] hub 1-0:1.0: 10 ports detected
[ 0.949836] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.949851] forcedeth: Reverse Engineered nForce ethernet driver.
Version 0.64.
[ 0.950113] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 0.950123] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 21
(level, low) -> IRQ 21
[ 0.950126] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.260015] usb 1-9: new high speed USB device using ehci_hcd and
address 2
[ 1.393938] usb 1-9: New USB device found, idVendor=058f, idProduct=6377
[ 1.393940] usb 1-9: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.393942] usb 1-9: Product: Mass Storage Device
[ 1.393944] usb 1-9: Manufacturer: Generic
[ 1.393945] usb 1-9: SerialNumber: 920321111113
[ 1.394187] usb 1-9: configuration #1 chosen from 1 choice
[ 1.400700] Initializing USB Mass Storage driver...
[ 1.400766] scsi0 : SCSI emulation for USB Mass Storage devices
[ 1.400876] usbcore: registered new interface driver usb-storage
[ 1.400879] USB Mass Storage support registered.
[ 1.401247] usb-storage: device found at 2
[ 1.401248] usb-storage: waiting for device to settle before scanning
[ 1.468882] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1,
addr 00:25:11:07:96:27
[ 1.468885] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi
desc-v3
[ 1.468968] sata_nv 0000:00:08.0: version 3.5
[ 1.469230] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 1.469240] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23
(level, low) -> IRQ 23
[ 1.469280] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.469733] scsi1 : sata_nv
[ 1.469935] scsi2 : sata_nv
[ 1.470069] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800
irq 23
[ 1.470072] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808
irq 23
[ 1.470374] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 1.470384] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20
(level, low) -> IRQ 20
[ 1.470401] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.470404] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.470415] ohci_hcd 0000:00:02.0: new USB bus registered, assigned
bus number 2
[ 1.470439] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 1.526012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.526015] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.526017] usb usb2: Product: OHCI Host Controller
[ 1.526019] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.526020] usb usb2: SerialNumber: 0000:00:02.0
[ 1.526132] usb usb2: configuration #1 chosen from 1 choice
[ 1.526179] hub 2-0:1.0: USB hub found
[ 1.526187] hub 2-0:1.0: 10 ports detected
[ 1.526242] pata_amd 0000:00:06.0: version 0.4.1
[ 1.526274] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.526471] scsi3 : pata_amd
[ 1.526539] scsi4 : pata_amd
[ 1.527006] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
irq 14
[ 1.527008] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008
irq 15
[ 1.527330] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 1.527335] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23
(level, low) -> IRQ 23
[ 1.527371] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.527477] scsi5 : sata_nv
[ 1.527645] scsi6 : sata_nv
[ 1.527759] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400
irq 23
[ 1.527762] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408
irq 23
[ 1.697175] ata3.01: ATA-5: WDC WD600BB-00CAA1, 17.07W17, max UDMA/100
[ 1.697178] ata3.01: 117231408 sectors, multi 16: LBA
[ 1.697196] ata3: nv_mode_filter: 0x3f39f&0x739f->0x739f, BIOS=0x7000
(0xc00000) ACPI=0x701f (600:60:0x1c)
[ 1.713084] ata3.01: configured for UDMA/33
[ 1.846216] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.940029] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.993543] ata1.00: ATA-7: ST3160815AS, 4.AAA, max UDMA/133
[ 1.993545] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.060189] ata1.00: configured for UDMA/133
[ 2.060267] scsi 1:0:0:0: Direct-Access ATA ST3160815AS
4.AA PQ: 0 ANSI: 5
[ 2.528030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.536107] ata2.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
[ 2.552117] ata2.00: configured for UDMA/100
[ 2.559666] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH40F
MG01 PQ: 0 ANSI: 5
[ 2.559837] scsi 3:0:1:0: Direct-Access ATA WDC WD600BB-00CA
17.0 PQ: 0 ANSI: 5
[ 2.559911] ata4: port disabled. ignoring.
[ 2.878216] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.893744] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160
GB/149 GiB)
[ 2.893777] sd 1:0:0:0: [sda] Write Protect is off
[ 2.893779] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.893793] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.893877] sda:
[ 2.894021] sd 3:0:1:0: [sdb] 117231408 512-byte logical blocks:
(60.0 GB/55.8 GiB)
[ 2.894049] sd 3:0:1:0: [sdb] Write Protect is off
[ 2.894051] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.894064] sd 3:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.894135] sdb: sdb1 sdb3 <sr0: scsi3-mmc drive: 40x/40x writer
dvd-ram cd/rw xa/form2 cdda tray
[ 2.915959] Uniform CD-ROM driver Revision: 3.20
[ 2.916187] sda1 sda2 sda3 sda4 <
[ 2.916260] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.921102] sdb5 sdb6 sda5 >
[ 2.939243] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.951690] sdb7 >
[ 2.952109] sd 3:0:1:0: [sdb] Attached SCSI disk
[ 2.960421] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.960681] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.960725] sd 3:0:1:0: Attached scsi generic sg2 type 0
[ 3.461728] PM: Starting manual resume from disk
[ 3.461732] PM: Resume from partition 8:5
[ 3.461733] PM: Checking hibernation image.
[ 3.489411] PM: Error -22 checking image file
[ 3.489413] PM: Resume from disk failed.
[ 3.533613] kjournald starting. Commit interval 5 seconds
[ 3.533621] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.554516] udev[394]: starting version 164
[ 6.163112] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 6.174198] k8temp 0000:00:18.3: Temperature readouts might be wrong
- check erratum #141
[ 6.175127] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 6.175163] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[ 6.226133] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.226220] ACPI: Power Button [PWRB]
[ 6.226321] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.226364] ACPI: Power Button [PWRF]
[ 6.231475] processor LNXCPU:00: registered as cooling_device1
[ 6.400219] usb-storage: device scan complete
[ 6.400826] scsi 0:0:0:0: Direct-Access Generic USB SD Reader
1.00 PQ: 0 ANSI: 0
[ 6.401446] scsi 0:0:0:1: Direct-Access Generic USB CF Reader
1.01 PQ: 0 ANSI: 0
[ 6.402069] scsi 0:0:0:2: Direct-Access Generic USB SM Reader
1.02 PQ: 0 ANSI: 0
[ 6.402703] scsi 0:0:0:3: Direct-Access Generic USB MS Reader
1.03 PQ: 0 ANSI: 0
[ 6.403454] sd 0:0:0:0: Attached scsi generic sg3 type 0
[ 6.403811] sd 0:0:0:1: Attached scsi generic sg4 type 0
[ 6.404570] sd 0:0:0:2: Attached scsi generic sg5 type 0
[ 6.404958] sd 0:0:0:3: Attached scsi generic sg6 type 0
[ 6.409195] sd 0:0:0:0: [sdc] Attached SCSI removable disk
[ 6.410948] sd 0:0:0:1: [sdd] Attached SCSI removable disk
[ 6.413569] sd 0:0:0:2: [sde] Attached SCSI removable disk
[ 6.414315] sd 0:0:0:3: [sdf] Attached SCSI removable disk
[ 6.905240] nvidia: module license 'NVIDIA' taints kernel.
[ 6.905244] Disabling lock debugging due to kernel taint
[ 7.780166] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 7.780178] nvidia 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16
(level, low) -> IRQ 16
[ 7.780185] nvidia 0000:02:00.0: setting latency timer to 64
[ 7.780189] vgaarb: device changed decodes:
PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.780666] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.31
Tue Jun 1 22:08:27 PDT 2010
[ 8.748146] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 8.748151] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 22
(level, low) -> IRQ 22
[ 8.748154] hda_intel: Disable MSI for Nvidia chipset
[ 8.748183] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 9.348019] hda_codec: ALC1200: BIOS auto-probing.
[ 9.660072] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:05.0/input/input4
[ 11.099713] Adding 2658716k swap on /dev/sda5. Priority:-1 extents:1
across:2658716k
[ 11.258124] EXT3 FS on sda3, internal journal
[ 11.391630] loop: module loaded
[ 13.175669] fuse init (API version 7.13)
[ 16.627720] forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
[ 23.034717] Bluetooth: Core ver 2.15
[ 23.034808] NET: Registered protocol family 31
[ 23.034809] Bluetooth: HCI device and connection manager initialized
[ 23.034811] Bluetooth: HCI socket layer initialized
[ 25.435052] Bluetooth: L2CAP ver 2.14
[ 25.435055] Bluetooth: L2CAP socket layer initialized
[ 25.758904] Bluetooth: RFCOMM TTY layer initialized
[ 25.758907] Bluetooth: RFCOMM socket layer initialized
[ 25.758909] Bluetooth: RFCOMM ver 1.11
[ 25.900487] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.900489] Bluetooth: BNEP filters: protocol multicast
[ 26.118030] Bridge firewalling registered
[ 26.279625] Bluetooth: SCO (Voice Link) ver 0.6
[ 26.279628] Bluetooth: SCO socket layer initialized
[ 26.852186] lp: driver loaded but no devices found
[ 26.864009] eth0: no IPv6 routers present
[ 27.131441] ppdev: user-space parallel port driver
[ 31.612652] eth0: link down.
[ 33.199023] powernow-k8: Found 1 AMD Athlon(tm) Processor LE-1640
processors (1 cpu cores) (version 2.20.00)
[ 33.199072] powernow-k8: 0 : fid 0x13 (2700 MHz), vid 0xc
[ 33.199074] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xd
[ 33.199076] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xf
[ 33.199078] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x11
[ 33.199080] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x11
[ 33.199082] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x11
[ 33.199084] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
[ 33.273740] eth0: link up.
[ 33.504019] Clocksource tsc unstable (delta = -120692186 ns)
[ 4541.480028] usb 2-5: new low speed USB device using ohci_hcd and
address 2
[ 4541.694042] usb 2-5: New USB device found, idVendor=046d, idProduct=c404
[ 4541.694051] usb 2-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4541.694058] usb 2-5: Product: Trackball
[ 4541.694062] usb 2-5: Manufacturer: Logitech
[ 4541.694262] usb 2-5: configuration #1 chosen from 1 choice
[ 4541.778763] usbcore: registered new interface driver hiddev
[ 4541.787965] input: Logitech Trackball as
/devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input5
[ 4541.789319] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech Trackball] on usb-0000:00:02.0-5/input0
[ 4541.789371] usbcore: registered new interface driver usbhid
[ 4541.790141] usbhid: v2.6:USB HID core driver
[ 5077.582015] operapluginwrap[2684]: segfault at 0 ip (null) sp
bf86c84c error 4 in operapluginwrapper[8048000+2b000]
[ 5077.930903] operapluginwrap[2688]: segfault at 0 ip (null) sp
bffd100c error 4 in operapluginwrapper[8048000+2b000]
[ 5078.106176] operapluginwrap[2691]: segfault at 0 ip (null) sp
bf85332c error 4 in operapluginwrapper[8048000+2b000]
[ 5078.157985] operapluginwrap[2693]: segfault at 0 ip (null) sp
bfacfa1c error 4 in operapluginwrapper[8048000+2b000]
Reply to: