[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Upgrade to 2.6.32-5-amd64 failing miserably



        Here is the output of dmesg under the new kernel:

[    4.228353] ata4.04: hard resetting link
[    4.564319] ata4.04: SATA link down (SStatus 0 SControl 320)
[    4.564375] ata4.05: hard resetting link
[    4.900300] ata4.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[    4.939162] ata4.00: ATA-8: WDC WD15EADS-00R6B0, 01.00A01, max
UDMA/133
[    4.939164] ata4.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[    4.943192] ata4.00: configured for UDMA/100
[    4.946435] ata4.01: ATA-8: WDC WD15EADS-00R6B0, 01.00A01, max
UDMA/133
[    4.946438] ata4.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[    4.950727] ata4.01: configured for UDMA/100
[    4.955783] ata4.02: ATA-8: WDC WD15EADS-00R6B0, 01.00A01, max
UDMA/133
[    4.955785] ata4.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[    4.961792] ata4.02: configured for UDMA/100
[    4.963501] ata4.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max
UDMA/133
[    4.963503] ata4.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[    4.965305] ata4.03: configured for UDMA/100
[    4.965365] ata4: EH complete
[    4.965449] scsi 3:0:0:0: Direct-Access     ATA      WDC WD15EADS-00R
01.0 PQ: 0 ANSI: 5
[    4.965585] scsi 3:1:0:0: Direct-Access     ATA      WDC WD15EADS-00R
01.0 PQ: 0 ANSI: 5
[    4.965707] scsi 3:2:0:0: Direct-Access     ATA      WDC WD15EADS-00R
01.0 PQ: 0 ANSI: 5
[    4.965832] scsi 3:3:0:0: Direct-Access     ATA      WDC WD15EADS-00P
01.0 PQ: 0 ANSI: 5
[    6.380157] usb-storage: device scan complete
[    6.380626] scsi 13:0:0:0: Direct-Access     SanDisk  SanDisk Cruzer  
8.02 PQ: 0 ANSI: 0 CCS
[    6.380996] scsi 13:0:0:1: CD-ROM            SanDisk  SanDisk Cruzer  
8.02 PQ: 0 ANSI: 0
[    7.076030] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[    7.076258] ata5.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports,
feat 0x1/0x9
[    7.092219] ata5.00: hard resetting link
[    7.428322] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[    7.428352] ata5.01: hard resetting link
[    7.764293] ata5.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.764320] ata5.02: hard resetting link
[    8.100323] ata5.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    8.100353] ata5.03: hard resetting link
[    8.436319] ata5.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    8.436348] ata5.04: hard resetting link
[    8.772318] ata5.04: SATA link down (SStatus 0 SControl 320)
[    8.772374] ata5.05: hard resetting link
[    9.108293] ata5.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[    9.110465] ata5.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max
UDMA/133
[    9.110468] ata5.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[    9.113055] ata5.00: configured for UDMA/100
[    9.115434] ata5.01: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max
UDMA/133
[    9.115436] ata5.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[    9.117420] ata5.01: configured for UDMA/100
[    9.119999] ata5.02: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max
UDMA/133
[    9.120001] ata5.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[    9.121969] ata5.02: configured for UDMA/100
[    9.124597] ata5.03: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max
UDMA/133
[    9.124600] ata5.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[    9.127144] ata5.03: configured for UDMA/100
[    9.127204] ata5: EH complete
[    9.127291] scsi 4:0:0:0: Direct-Access     ATA      WDC WD15EARS-00Z
80.0 PQ: 0 ANSI: 5
[    9.127469] scsi 4:1:0:0: Direct-Access     ATA      WDC WD15EARS-00Z
80.0 PQ: 0 ANSI: 5
[    9.127593] scsi 4:2:0:0: Direct-Access     ATA      WDC WD15EARS-00Z
80.0 PQ: 0 ANSI: 5
[    9.127705] scsi 4:3:0:0: Direct-Access     ATA      WDC WD15EADS-00P
01.0 PQ: 0 ANSI: 5
[   11.252029] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[   11.252255] ata6.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports,
feat 0x1/0x9
[   11.268197] ata6.00: hard resetting link
[   11.604322] ata6.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[   11.604353] ata6.01: hard resetting link
[   11.940321] ata6.01: SATA link down (SStatus 0 SControl 320)
[   11.940378] ata6.02: hard resetting link
[   12.276293] ata6.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   12.276320] ata6.03: hard resetting link
[   12.612321] ata6.03: SATA link down (SStatus 0 SControl 320)
[   12.612377] ata6.04: hard resetting link
[   12.948321] ata6.04: SATA link down (SStatus 0 SControl 320)
[   12.948378] ata6.05: hard resetting link
[   13.284318] ata6.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[   13.287633] ata6.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max
UDMA/133
[   13.287635] ata6.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[   13.290246] ata6.00: configured for UDMA/100
[   13.292122] ata6.02: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max
UDMA/133
[   13.292124] ata6.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth
31/32)
[   13.294114] ata6.02: configured for UDMA/100
[   13.294174] ata6: EH complete
[   13.294229] scsi 5:0:0:0: Direct-Access     ATA      WDC WD15EADS-00P
01.0 PQ: 0 ANSI: 5
[   13.294344] scsi 5:2:0:0: Direct-Access     ATA      WDC WD15EARS-00Z
80.0 PQ: 0 ANSI: 5
[   23.324019] ata7: softreset failed (timeout)
[   33.340017] ata7: softreset failed (timeout)
[   68.364019] ata7: softreset failed (timeout)
[   68.364053] ata7: limiting SATA link speed to 1.5 Gbps
[   73.388016] ata7: softreset failed (timeout)
[   73.388049] ata7: reset failed, giving up
[   73.388183] scsi 11:0:0:0: Direct-Access     ATA      ST3500641A      
3.AA PQ: 0 ANSI: 5
[   73.388293] scsi 11:0:1:0: Direct-Access     ATA      ST3500641A      
3.AA PQ: 0 ANSI: 5
[   73.562936] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   73.563158] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[   73.563213] r8169 0000:05:00.0: setting latency timer to 64
[   73.563248]   alloc irq_desc for 28 on node 0
[   73.563250]   alloc kstat_irqs on node 0
[   73.563269] r8169 0000:05:00.0: irq 28 for MSI/MSI-X
[   73.567928] eth0: RTL8168c/8111c at 0xffffc90010ad0000,
00:22:15:59:63:1f, XID 1c4000c0 IRQ 28
[   73.581890] firewire_ohci 0000:04:00.0: PCI INT A -> GSI 17 (level,
low) -> IRQ 17
[   73.581898] firewire_ohci 0000:04:00.0: setting latency timer to 64
[   73.595412] sd 3:0:0:0: [sda] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[   73.595470] sd 3:0:0:0: [sda] Write Protect is off
[   73.595473] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   73.595483] sd 3:1:0:0: [sdb] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[   73.595495] sd 3:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.595533] sd 3:1:0:0: [sdb] Write Protect is off
[   73.595536] sd 3:1:0:0: [sdb] Mode Sense: 00 3a 00 00
[   73.595555] sd 3:1:0:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.595651]  sda:
[   73.595737]  sdb:
[   73.595880] sd 3:2:0:0: [sdc] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[   73.595923] sd 3:2:0:0: [sdc] Write Protect is off
[   73.595925] sd 3:2:0:0: [sdc] Mode Sense: 00 3a 00 00
[   73.595943] sd 3:2:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.596044]  sdc:
[   73.596784] sd 3:3:0:0: [sdd] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[   73.596853] sd 3:3:0:0: [sdd] Write Protect is off
[   73.596855] sd 3:3:0:0: [sdd] Mode Sense: 00 3a 00 00
[   73.596875] sd 3:3:0:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.597002]  sdd:
[   73.597851] sd 13:0:0:0: [sde] 7856127 512-byte logical blocks: (4.02
GB/3.74 GiB)
[   73.598390] sd 13:0:0:0: [sde] Write Protect is off
[   73.598393] sd 13:0:0:0: [sde] Mode Sense: 45 00 00 08
[   73.598395] sd 13:0:0:0: [sde] Assuming drive cache: write through
[   73.598590] sd 4:0:0:0: [sdf] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[   73.598630] sd 4:0:0:0: [sdf] Write Protect is off
[   73.598633] sd 4:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[   73.598714] sd 4:0:0:0: [sdf] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.598832]  sdf:
[   73.598906] sd 4:1:0:0: [sdg] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[   73.598944] sd 4:1:0:0: [sdg] Write Protect is off
[   73.598946] sd 4:1:0:0: [sdg] Mode Sense: 00 3a 00 00
[   73.598962] sd 4:1:0:0: [sdg] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.599062]  sdg:
[   73.599116] sd 4:2:0:0: [sdh] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[   73.599169] sd 4:2:0:0: [sdh] Write Protect is off
[   73.599171] sd 4:2:0:0: [sdh] Mode Sense: 00 3a 00 00
[   73.599187] sd 4:2:0:0: [sdh] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.599286]  sdh:
[   73.599333] sd 4:3:0:0: [sdi] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[   73.599370] sd 4:3:0:0: [sdi] Write Protect is off
[   73.599372] sd 4:3:0:0: [sdi] Mode Sense: 00 3a 00 00
[   73.599394] sd 4:3:0:0: [sdi] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.599485]  sdi:
[   73.599548] sd 5:0:0:0: [sdj] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[   73.599588] sd 5:0:0:0: [sdj] Write Protect is off
[   73.599590] sd 5:0:0:0: [sdj] Mode Sense: 00 3a 00 00
[   73.599607] sd 5:0:0:0: [sdj] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.599708]  sdj:
[   73.599751] sd 5:2:0:0: [sdk] 2930277168 512-byte logical blocks:
(1.50 TB/1.36 TiB)
[   73.599795] sd 5:2:0:0: [sdk] Write Protect is off
[   73.599797] sd 5:2:0:0: [sdk] Mode Sense: 00 3a 00 00
[   73.599814] sd 5:2:0:0: [sdk] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.599918]  sdk:
[   73.599988] sd 11:0:1:0: [sdm] 976773168 512-byte logical blocks:
(500 GB/465 GiB)
[   73.600045] sd 11:0:0:0: [sdl] 976773168 512-byte logical blocks:
(500 GB/465 GiB)
[   73.600086] sd 11:0:0:0: [sdl] Write Protect is off
[   73.600088] sd 11:0:0:0: [sdl] Mode Sense: 00 3a 00 00
[   73.600107] sd 11:0:0:0: [sdl] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.600165] sd 11:0:1:0: [sdm] Write Protect is off
[   73.600167] sd 11:0:1:0: [sdm] Mode Sense: 00 3a 00 00
[   73.600193] sd 11:0:1:0: [sdm] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   73.600265] sd 13:0:0:0: [sde] Assuming drive cache: write through
[   73.600300]  sde:
[   73.600373]  sdl:sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda
tray
[   73.600604] Uniform CD-ROM driver Revision: 3.20
[   73.600699] sr 2:0:1:0: Attached scsi CD-ROM sr0
[   73.603799]  sde1
[   73.603973] usbcore: registered new interface driver hiddev
[   73.608745] sr 2:0:1:0: Attached scsi generic sg0 type 5
[   73.608779] sd 3:0:0:0: Attached scsi generic sg1 type 0
[   73.608808] sd 3:1:0:0: Attached scsi generic sg2 type 0
[   73.608846] sd 3:2:0:0: Attached scsi generic sg3 type 0
[   73.608884] sr1: scsi3-mmc drive: 48x/48x tray
[   73.608994] sd 3:3:0:0: Attached scsi generic sg4 type 0
[   73.609060] sd 13:0:0:0: Attached scsi generic sg5 type 0
[   73.609192] sr 13:0:0:1: Attached scsi CD-ROM sr1
[   73.609410] sr 13:0:0:1: Attached scsi generic sg6 type 5
[   73.609479] sd 4:0:0:0: Attached scsi generic sg7 type 0
[   73.609542] sd 13:0:0:0: [sde] Assuming drive cache: write through
[   73.609548] sd 4:1:0:0: Attached scsi generic sg8 type 0
[   73.609580] sd 13:0:0:0: [sde] Attached SCSI removable disk
[   73.609651] sd 4:2:0:0: Attached scsi generic sg9 type 0
[   73.609718] sd 4:3:0:0: Attached scsi generic sg10 type 0
[   73.609776] sd 5:0:0:0: Attached scsi generic sg11 type 0
[   73.609833] sd 5:2:0:0: Attached scsi generic sg12 type 0
[   73.609897] sd 11:0:0:0: Attached scsi generic sg13 type 0
[   73.609956] sd 11:0:1:0: Attached scsi generic sg14 type 0
[   73.614471]  sdl1 sdl2 sdl3
[   73.635748]  sdm: sdm1 sdm2 sdm3
[   73.660020] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI
version 1.10
[   73.672552] sd 11:0:0:0: [sdl] Attached SCSI disk
[   73.672739] sd 11:0:1:0: [sdm] Attached SCSI disk
[   73.996376]  unknown partition table
[   73.996582] sd 3:1:0:0: [sdb] Attached SCSI disk
[   74.058234]
[   74.058579] sd 5:2:0:0: [sdk] Attached SCSI disk
[   74.064289]
[   74.064451] sd 4:2:0:0: [sdh] Attached SCSI disk
[   74.073319]  unknown partition table
[   74.074050] sd 3:3:0:0: [sdd] Attached SCSI disk
[   74.074309]
[   74.074760] sd 4:0:0:0: [sdf] Attached SCSI disk
[   74.076343]
[   74.081240]
[   74.082740] sd 5:0:0:0: [sdj] Attached SCSI disk
[   74.088837] sd 4:1:0:0: [sdg] Attached SCSI disk
[   74.088979]  unknown partition table
[   74.089986] sd 4:3:0:0: [sdi] Attached SCSI disk
[   74.093092] md: bind<sdm1>
[   74.101862] md: bind<sdl2>
[   74.115438] md: bind<sdm3>
[   74.141257]  unknown partition table
[   74.141381]  unknown partition table
[   74.142712] sd 3:2:0:0: [sdc] Attached SCSI disk
[   74.142756] sd 3:0:0:0: [sda] Attached SCSI disk
[   74.143154] md: array md3 already has disks!
[   74.160601] firewire_core: created device fw0: GUID 001e8c000162dcce,
S400
[   74.161513] md: bind<sdi>
[   74.665772] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID
v1.10 Device [American Power Conversion Back-UPS RS 1000 FW:7.g7 .D USB
FW:g7 ] on usb-0000:00:12.1-3/input0
[   74.671912] input: Key Tronic Keytronic USB Keyboard
as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input1
[   74.671961] generic-usb 0003:03F9:0100.0002: input,hidraw1: USB HID
v1.10 Keyboard [Key Tronic Keytronic USB Keyboard] on
usb-0000:00:12.1-1.1/input0
[   74.676854] input: USB OpticalWheel Mouse
as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1.2/4-1.2:1.0/input/input2
[   74.676910] generic-usb 0003:04FC:0015.0003: input,hidraw2: USB HID
v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:12.1-1.2/input0
[   74.681828] input: Justcom Technology USB KVM Switch
as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1.3/4-1.3:1.0/input/input3
[   74.681865] generic-usb 0003:06F2:0011.0004: input,hidraw3: USB HID
v1.10 Keyboard [Justcom Technology USB KVM Switch] on
usb-0000:00:12.1-1.3/input0
[   74.686841] input: Justcom Technology USB KVM Switch
as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1.3/4-1.3:1.1/input/input4
[   74.686919] generic-usb 0003:06F2:0011.0005: input,hidraw4: USB HID
v1.10 Mouse [Justcom Technology USB KVM Switch] on
usb-0000:00:12.1-1.3/input1
[   74.686947] usbcore: registered new interface driver usbhid
[   74.686949] usbhid: v2.6:USB HID core driver
[   74.777699] md: raid1 personality registered for level 1
[   74.786167] async_tx: api initialized (async)
[   74.786639] xor: automatically using best checksumming function:
generic_sse
[   74.804011]    generic_sse:  8104.000 MB/sec
[   74.804013] xor: using function: generic_sse (8104.000 MB/sec)
[   74.872020] raid6: int64x1   2458 MB/s
[   74.940025] raid6: int64x2   3204 MB/s
[   75.008031] raid6: int64x4   2491 MB/s
[   75.076033] raid6: int64x8   2256 MB/s
[   75.144018] raid6: sse2x1    1299 MB/s
[   75.212039] raid6: sse2x2    2044 MB/s
[   75.280023] raid6: sse2x4    2774 MB/s
[   75.280024] raid6: using algorithm sse2x4 (2774 MB/s)
[   75.284431] md: raid6 personality registered for level 6
[   75.284434] md: raid5 personality registered for level 5
[   75.284436] md: raid4 personality registered for level 4
[   75.320682] device-mapper: uevent: version 1.0.3
[   75.320837] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@redhat.com


Reply to: