Re: System monitoring tool for AMD64
On Thu, 19 Mar 2009 15:40:11 -0700, Phillip Pi wrote:
> Did you run sensors-detect as root/sudo before? Then, add the lines it
> detected. Here's mine:
Thanks for the instruction, and the example output too!
Mine doesn't look as good -- I mean, most values are wrong -- but here it
is anyway:
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +8.0 C
Core0 Temp: +6.0 C
Core1 Temp: +7.0 C
Core1 Temp: +3.0 C
it8718-isa-0290
Adapter: ISA adapter
in0: +1.12 V (min = +3.82 V, max = +2.99 V) ALARM
in1: +1.25 V (min = +3.06 V, max = +4.08 V) ALARM
in2: +3.49 V (min = +0.00 V, max = +3.01 V) ALARM
in3: +3.09 V (min = +2.03 V, max = +3.82 V)
in4: +3.12 V (min = +0.00 V, max = +2.03 V) ALARM
in5: +1.89 V (min = +4.05 V, max = +4.08 V) ALARM
in6: +1.26 V (min = +3.06 V, max = +3.54 V) ALARM
in7: +3.04 V (min = +3.95 V, max = +4.08 V) ALARM
in8: +3.12 V
fan1: 1418 RPM (min = 10 RPM)
fan2: 0 RPM (min = 32 RPM) ALARM
fan3: 0 RPM (min = 10 RPM) ALARM
temp1: +28.0 C (low = +127.0 C, high = +92.0 C) sensor = thermal
diode
temp2: +127.0 C (low = +127.0 C, high = +92.0 C) ALARM sensor =
thermistor
temp3: +127.0 C (low = +127.0 C, high = +92.0 C) ALARM sensor =
thermistor
cpu0_vid: +1.550 V
--
Tong (remove underscore(s) to reply)
http://xpt.sourceforge.net/techdocs/
http://xpt.sourceforge.net/tools/
Reply to: