Re: iomega portable hard drive
Hello Douglas
2009/3/16 Douglas A. Tutty <dtutty@vianet.ca>:
> On Mon, Mar 16, 2009 at 07:11:55AM -0300, Marcelo Chiapparini wrote:
>> is it possible to put to work a 120 GB Iomega Portable Hard Drive (usb
>> powered) under Lenny? I own one myself, but I can't mount it. I
>> googled a bit too, but without success besides the fact that there is
>> no direct linux support for it.
>
> It may not need direct support. When you plug it in, udev should create
> a /dev/sd* node for it and report this in /var/log/syslog.
>
> At a command line, run:
> $ tail -f /var/log/syslog
>
> and plug in the drive.
>
> See what shows up, then mount the drive.
here follows the output. Sorry for the long log...
Mar 16 19:36:24 yggdrasill kernel: [ 6171.559461] usb 3-2: new full
speed USB device using uhci_hcd and address 4
Mar 16 19:36:24 yggdrasill kernel: [ 6171.724615] usb 3-2:
configuration #1 chosen from 1 choice
Mar 16 19:36:24 yggdrasill kernel: [ 6171.730447] scsi5 : SCSI
emulation for USB Mass Storage devices
Mar 16 19:36:24 yggdrasill kernel: [ 6171.730447] usb-storage: device found at 4
Mar 16 19:36:24 yggdrasill kernel: [ 6171.730447] usb-storage: waiting
for device to settle before scanning
Mar 16 19:36:24 yggdrasill kernel: [ 6171.730447] usb 3-2: New USB
device found, idVendor=059b, idProduct=0272
Mar 16 19:36:24 yggdrasill kernel: [ 6171.730447] usb 3-2: New USB
device strings: Mfr=81, Product=57, SerialNumber=44
Mar 16 19:36:24 yggdrasill kernel: [ 6171.730447] usb 3-2: Product:
Iomega HDD USB2.0 Drive
Mar 16 19:36:24 yggdrasill kernel: [ 6171.730447] usb 3-2: Manufacturer: Iomega
Mar 16 19:36:24 yggdrasill kernel: [ 6171.730447] usb 3-2:
SerialNumber: 56780D96EC35
Mar 16 19:36:24 yggdrasill NetworkManager: <debug> [1237242984.480140]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_59b_272_56780D96EC35').
Mar 16 19:36:24 yggdrasill NetworkManager: <debug> [1237242984.563176]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_59b_272_56780D96EC35_if0').
Mar 16 19:36:24 yggdrasill NetworkManager: <debug> [1237242984.596214]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_59b_272_56780D96EC35_usbraw').
Mar 16 19:36:29 yggdrasill kernel: [ 6177.509493] usb-storage: device
scan complete
Mar 16 19:36:29 yggdrasill kernel: [ 6177.517493] scsi 5:0:0:0:
Direct-Access ST912082 2A 0000 PQ: 0 ANSI: 0
Mar 16 19:36:29 yggdrasill kernel: [ 6177.540014] sd 5:0:0:0: [sda]
234441648 512-byte hardware sectors (120034 MB)
Mar 16 19:36:29 yggdrasill kernel: [ 6177.544022] sd 5:0:0:0: [sda]
Write Protect is off
Mar 16 19:36:29 yggdrasill kernel: [ 6177.544032] sd 5:0:0:0: [sda]
Mode Sense: 27 00 00 00
Mar 16 19:36:29 yggdrasill kernel: [ 6177.544037] sd 5:0:0:0: [sda]
Assuming drive cache: write through
Mar 16 19:36:29 yggdrasill kernel: [ 6177.548984] sd 5:0:0:0: [sda]
234441648 512-byte hardware sectors (120034 MB)
Mar 16 19:36:29 yggdrasill kernel: [ 6177.554860] sd 5:0:0:0: [sda]
Write Protect is off
Mar 16 19:36:29 yggdrasill kernel: [ 6177.554872] sd 5:0:0:0: [sda]
Mode Sense: 27 00 00 00
Mar 16 19:36:29 yggdrasill kernel: [ 6177.554877] sd 5:0:0:0: [sda]
Assuming drive cache: write through
Mar 16 19:36:29 yggdrasill NetworkManager: <debug> [1237242989.522010]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_59b_272_56780D96EC35_if0_scsi_host').
Mar 16 19:36:29 yggdrasill NetworkManager: <debug> [1237242989.526945]
nm_hal_device_added(): New device added (hal udi is
'/org/freedesktop/Hal/devices/usb_device_59b_272_56780D96EC35_if0_scsi_host_scsi_device_lun0').
Mar 16 19:36:59 yggdrasill kernel: [ 6177.554886] sda:<6>usb 3-2:
reset full speed USB device using uhci_hcd and address 4
Mar 16 19:37:30 yggdrasill kernel: [ 6247.201428] usb 3-2: reset full
speed USB device using uhci_hcd and address 4
Mar 16 19:38:01 yggdrasill kernel: [ 6282.953728] usb 3-2: reset full
speed USB device using uhci_hcd and address 4
Mar 16 19:38:32 yggdrasill kernel: [ 6317.559655] usb 3-2: reset full
speed USB device using uhci_hcd and address 4
Mar 16 19:39:03 yggdrasill kernel: [ 6350.586207] usb 3-2: reset full
speed USB device using uhci_hcd and address 4
Mar 16 19:39:34 yggdrasill kernel: [ 6385.055989] usb 3-2: reset full
speed USB device using uhci_hcd and address 4
Mar 16 19:39:35 yggdrasill kernel: [ 6386.107479] sd 5:0:0:0: [sda]
Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK,SUGGEST_OK
Mar 16 19:39:35 yggdrasill kernel: [ 6386.107479] end_request: I/O
error, dev sda, sector 0
Mar 16 19:39:35 yggdrasill kernel: [ 6386.107479] __ratelimit: 4
messages suppressed
Mar 16 19:39:35 yggdrasill kernel: [ 6386.107479] Buffer I/O error on
device sda, logical block 0
Mar 16 19:40:06 yggdrasill kernel: [ 6420.388444] usb 3-2: reset full
speed USB device using uhci_hcd and address 4
and nothing appears in /dev, like /dev/sda... so I can't mount it.
What is going wrong?
Thank you very much for the help!
Marcelo
Reply to: