Lenovo laptop - Type Control D to Continue
Hey Guy's I have Lenovo laptop, new "Lenny install" and I'm having to
type control+d to continue boot, I looked at "dmesg" and I can't make
what the problem is, so I post and maybe someone can figure the problem.
If more info is needed let me know. :)
laptop-1:/home/jj# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-13)
(waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC 2009
[ 0.000000] Command line: root=/dev/sda6 ro single vga=791
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 521936) 1 entries of
3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F7050, 0024 (r2 LENOVO)
[ 0.000000] ACPI: XSDT 7F6D75A3, 008C (r1 LENOVO CB-01 6040000
LTP 0)
[ 0.000000] ACPI: FACP 7F6DFC3A, 00F4 (r3 LENOVO CB-01 6040000
ALAN 1)
[ 0.000000] ACPI: DSDT 7F6D92A6, 6920 (r2 LENOVO CB-01 6040000
INTL 20060608)
[ 0.000000] ACPI: FACS 7F6E2FC0, 0040
[ 0.000000] ACPI: HPET 7F6DFD2E, 0038 (r1 LENOVO CB-01 6040000
LOHR 5A)
[ 0.000000] ACPI: MCFG 7F6DFD66, 003C (r1 LENOVO CB-01 6040000
LOHR 5A)
[ 0.000000] ACPI: TCPA 7F6DFDA2, 0032 (r1 LENOVO CB-01 6040000
LOHR 5A)
[ 0.000000] ACPI: TMOR 7F6DFDD4, 0026 (r1 LENOVO CB-01 6040000
PTL 3)
[ 0.000000] ACPI: SLIC 7F6DFDFA, 0176 (r1 LENOVO CB-01 6040000
TBD 1)
[ 0.000000] ACPI: APIC 7F6DFF70, 0068 (r1 LENOVO CB-01 6040000
LTP 0)
[ 0.000000] ACPI: BOOT 7F6DFFD8, 0028 (r1 LENOVO CB-01 6040000
LTP 1)
[ 0.000000] ACPI: SSDT 7F6D8C57, 064F (r1 SataRe SataPri 1000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7F6D85C5, 0692 (r1 SataRe SataSec 1000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7F6D7BBB, 025F (r1 PmRef Cpu0Tst 3000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7F6D7B15, 00A6 (r1 PmRef Cpu1Tst 3000
INTL 20050624)
[ 0.000000] ACPI: SSDT 7F6D762F, 04E6 (r1 PmRef CpuPm 3000
INTL 20050624)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f6d0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 521936) 1 entries of
3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007f6d0000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff]
[ 0.000000] bootmap [0000000000011000 - 0000000000020edf] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS
[ 0.000000] early res: 3 [37990000-37fefba8] RAMDISK
[ 0.000000] early res: 4 [9f800-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD ->
[ffff810001200000-ffff810002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 521936
[ 0.000000] On node 0 totalpages: 521839
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1246 pages reserved
[ 0.000000] DMA zone: 2697 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7080 pages used for memmap
[ 0.000000] DMA32 zone: 510760 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 -
00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 -
00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap:
80000000:60000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 513457
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda6 ro single vga=791
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 1496.226 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2047312k/2087744k available (2226k kernel code,
40044k reserved, 1082k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083944] Calibrating delay using timer specific routine.. 2996.75
BogoMIPS (lpj=5993511)
[ 0.084005] Security Framework initialized
[ 0.084005] SELinux: Disabled at boot.
[ 0.084005] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 2048K
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] CPU0: Thermal monitoring handled by SMI
[ 0.084005] using mwait in idle threads.
[ 0.085329] ACPI: Core revision 20080321
[ 0.144505] CPU0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz
stepping 0d
[ 0.144517] Using local APIC timer interrupts.
[ 0.152009] APIC timer calibration result 10390450
[ 0.152009] Detected 10.390 MHz APIC timer.
[ 0.152009] Booting processor 1/1 ip 6000
[ 0.160010] Initializing CPU#1
[ 0.160010] Calibrating delay using timer specific routine.. 2992.46
BogoMIPS (lpj=5984926)
[ 0.160010] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.160010] CPU: L2 cache: 2048K
[ 0.160010] CPU 1/1 -> Node 0
[ 0.160010] CPU: Physical Processor ID: 0
[ 0.160010] CPU: Processor Core ID: 1
[ 0.160010] CPU1: Thermal monitoring enabled (TM2)
[ 0.240015] CPU1: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz
stepping 0d
[ 0.240015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.244015] Brought up 2 CPUs
[ 0.244015] Total of 2 processors activated (5989.21 BogoMIPS).
[ 0.244015] CPU0 attaching sched-domain:
[ 0.244015] domain 0: span 0-1
[ 0.244015] groups: 0 1
[ 0.244015] domain 1: span 0-1
[ 0.244015] groups: 0-1
[ 0.244015] CPU1 attaching sched-domain:
[ 0.244015] domain 0: span 0-1
[ 0.244015] groups: 1 0
[ 0.244015] domain 1: span 0-1
[ 0.244015] groups: 0-1
[ 0.244015] net_namespace: 1224 bytes
[ 0.244015] Booting paravirtualized kernel on bare hardware
[ 0.244015] NET: Registered protocol family 16
[ 0.244015] ACPI: bus type pci registered
[ 0.244015] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255
[ 0.244015] PCI: MCFG area at e0000000 reserved in E820
[ 0.262757] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.262763] PCI: Using configuration type 1 for base access
[ 0.264016] ACPI: EC: Look up EC in DSDT
[ 0.272017] ACPI: BIOS _OSI(Linux) query ignored
[ 0.272017] ACPI: DMI System Vendor: LENOVO
[ 0.272017] ACPI: DMI Product Name: LENOVO3000 Y410
[ 0.272017] ACPI: DMI Product Version:
[ 0.272017] ACPI: DMI Board Name: IGT30
[ 0.272017] ACPI: DMI BIOS Vendor: LENOVO
[ 0.272017] ACPI: DMI BIOS Date: 08/29/2007
[ 0.272017] ACPI: Please send DMI info above to
linux-acpi@vger.kernel.org
[ 0.272017] ACPI: If "acpi_osi=Linux" works better, please notify
linux-acpi@vger.kernel.org
[ 0.272017] ACPI: Interpreter enabled
[ 0.272017] ACPI: (supports S0 S3 S4 S5)
[ 0.272059] ACPI: Using IOAPIC for interrupt routing
[ 0.321071] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.321071] ACPI: EC: driver started in poll mode
[ 0.321071] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.321071] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6
ACPI/GPIO/TCO
[ 0.321071] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6
GPIO
[ 0.326244] PCI: Transparent bridge - 0000:00:1e.0
[ 0.326363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.326977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.327197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.327419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.327636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.327641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.347642] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12
14 15)
[ 0.347642] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.347642] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12
14 15)
[ 0.347642] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.347642] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12
14 15) *0, disabled.
[ 0.347642] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12
14 15)
[ 0.347642] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12
14 15) *11
[ 0.347642] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12
14 15) *10
[ 0.347642] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.347642] pnp: PnP ACPI init
[ 0.347642] ACPI: bus type pnp registered
[ 0.347642] pnp 00:00: parse allocated resources
[ 0.347642] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.347642] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.347642] pnp 00:01: parse allocated resources
[ 0.347642] pnp 00:01: add mem 0xfed1c000-0xfed1ffff flags 0x1
[ 0.347642] pnp 00:01: add mem 0xfed14000-0xfed17fff flags 0x1
[ 0.347642] pnp 00:01: add mem 0xfed18000-0xfed18fff flags 0x1
[ 0.347642] pnp 00:01: add mem 0xfed19000-0xfed19fff flags 0x1
[ 0.347642] pnp 00:01: add mem 0xe0000000-0xefffffff flags 0x1
[ 0.347642] pnp 00:01: add mem 0xfed20000-0xfed3ffff flags 0x1
[ 0.347642] pnp 00:01: add mem 0xfed40000-0xfed44fff flags 0x1
[ 0.347642] pnp 00:01: add mem 0xfed45000-0xfed8ffff flags 0x1
[ 0.347642] pnp 00:01: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
[ 0.347642] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.348949] pnp 00:02: parse allocated resources
[ 0.348957] pnp 00:02: add io 0x0-0x1f flags 0x1
[ 0.348959] pnp 00:02: add io 0x81-0x91 flags 0x1
[ 0.348962] pnp 00:02: add io 0x93-0x9f flags 0x1
[ 0.348965] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.348968] pnp 00:02: add dma 4 flags 0x1
[ 0.349611] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.349626] pnp 00:03: parse allocated resources
[ 0.349632] pnp 00:03: add mem 0xff000000-0xffffffff flags 0x0
[ 0.350277] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.350367] pnp 00:04: parse allocated resources
[ 0.350498] pnp 00:04: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.350503] pnp 00:04: PNP0c01: calling
quirk_system_pci_resources+0x0/0x15c
[ 0.351179] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01
(active)
[ 0.351196] pnp 00:05: parse allocated resources
[ 0.351203] pnp 00:05: add io 0xf0-0xf0 flags 0x1
[ 0.351214] pnp 00:05: add irq 13 flags 0x1
[ 0.351859] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.351872] pnp 00:06: parse allocated resources
[ 0.351881] pnp 00:06: add io 0x2e-0x2f flags 0x1
[ 0.351884] pnp 00:06: add io 0x4e-0x4f flags 0x1
[ 0.351886] pnp 00:06: add io 0x61-0x61 flags 0x1
[ 0.351889] pnp 00:06: add io 0x63-0x63 flags 0x1
[ 0.351891] pnp 00:06: add io 0x65-0x65 flags 0x1
[ 0.351894] pnp 00:06: add io 0x67-0x67 flags 0x1
[ 0.351896] pnp 00:06: add io 0x68-0x68 flags 0x1
[ 0.351899] pnp 00:06: add io 0x6c-0x6c flags 0x1
[ 0.351901] pnp 00:06: add io 0x80-0x80 flags 0x1
[ 0.351904] pnp 00:06: add io 0x92-0x92 flags 0x1
[ 0.351906] pnp 00:06: add io 0xb2-0xb3 flags 0x1
[ 0.351909] pnp 00:06: add io 0x680-0x69f flags 0x1
[ 0.351912] pnp 00:06: add io 0x800-0x80f flags 0x1
[ 0.351914] pnp 00:06: add io 0x1000-0x107f flags 0x1
[ 0.351917] pnp 00:06: add io 0x1180-0x11bf flags 0x1
[ 0.351920] pnp 00:06: add io 0xfe00-0xfe00 flags 0x1
[ 0.351922] pnp 00:06: add io 0xff00-0xff7f flags 0x1
[ 0.351926] pnp 00:06: PNP0c02: calling
quirk_system_pci_resources+0x0/0x15c
[ 0.352294] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.352294] pnp 00:07: parse allocated resources
[ 0.352294] pnp 00:07: add io 0x70-0x77 flags 0x1
[ 0.352294] pnp 00:07: add irq 8 flags 0x1
[ 0.352294] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.370748] pnp 00:08: parse allocated resources
[ 0.370755] pnp 00:08: add io 0x60-0x60 flags 0x1
[ 0.370758] pnp 00:08: add io 0x64-0x64 flags 0x1
[ 0.370766] pnp 00:08: add irq 1 flags 0x1
[ 0.372295] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.372295] pnp 00:09: parse allocated resources
[ 0.372295] pnp 00:09: add irq 12 flags 0x1
[ 0.372295] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.372295] pnp: PnP ACPI: found 10 devices
[ 0.372295] ACPI: ACPI bus type pnp unregistered
[ 0.372295] usbcore: registered new interface driver usbfs
[ 0.372295] usbcore: registered new interface driver hub
[ 0.372295] usbcore: registered new device driver usb
[ 0.372295] PCI: Using ACPI for IRQ routing
[ 0.383660] PCI-GART: No AMD northbridge found.
[ 0.383672] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.383680] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.387609] ACPI: RTC can wake from S4
[ 0.398468] pnp: the driver 'system' has been registered
[ 0.398482] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not
be reserved
[ 0.398491] system 00:01: iomem range 0xfed14000-0xfed17fff could not
be reserved
[ 0.398498] system 00:01: iomem range 0xfed18000-0xfed18fff could not
be reserved
[ 0.398505] system 00:01: iomem range 0xfed19000-0xfed19fff could not
be reserved
[ 0.398513] system 00:01: iomem range 0xe0000000-0xefffffff could not
be reserved
[ 0.398520] system 00:01: iomem range 0xfed20000-0xfed3ffff could not
be reserved
[ 0.398527] system 00:01: iomem range 0xfed40000-0xfed44fff could not
be reserved
[ 0.398535] system 00:01: iomem range 0xfed45000-0xfed8ffff could not
be reserved
[ 0.398541] system 00:01: driver attached
[ 0.398551] system 00:04: iomem range 0xfed00000-0xfed003ff could not
be reserved
[ 0.398557] system 00:04: driver attached
[ 0.398565] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.398571] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.398577] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.398583] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.398590] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.398596] system 00:06: ioport range 0xff00-0xff7f has been reserved
[ 0.398601] system 00:06: driver attached
[ 0.399779] PCI: Bridge: 0000:00:1c.0
[ 0.399779] IO window: 2000-2fff
[ 0.399779] MEM window: 0xc0000000-0xc3ffffff
[ 0.399779] PREFETCH window: 0x00000000cc000000-0x00000000cdffffff
[ 0.399779] PCI: Bridge: 0000:00:1c.1
[ 0.399779] IO window: 3000-3fff
[ 0.399779] MEM window: 0xf0000000-0xf3ffffff
[ 0.399779] PREFETCH window: 0x00000000fa000000-0x00000000fbffffff
[ 0.399779] PCI: Bridge: 0000:00:1c.2
[ 0.399779] IO window: 4000-4fff
[ 0.399779] MEM window: 0xf4000000-0xf7ffffff
[ 0.399779] PREFETCH window: 0x00000000fc000000-0x00000000fdffffff
[ 0.399779] PCI: Bridge: 0000:00:1c.3
[ 0.399779] IO window: 5000-5fff
[ 0.399779] MEM window: 0xb8000000-0xbbffffff
[ 0.399779] PREFETCH window: 0x00000000c8000000-0x00000000c9ffffff
[ 0.399779] PCI: Bridge: 0000:00:1e.0
[ 0.399779] IO window: disabled.
[ 0.399779] MEM window: 0xf8200000-0xf82fffff
[ 0.399779] PREFETCH window: disabled.
[ 0.399779] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 0.399779] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.399779] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level,
low) -> IRQ 16
[ 0.399779] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.399779] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level,
low) -> IRQ 18
[ 0.399779] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.399779] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level,
low) -> IRQ 19
[ 0.399779] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.399779] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.399779] NET: Registered protocol family 2
[ 0.434554] IP route cache hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.436937] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.437221] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.437221] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.437221] TCP reno registered
[ 0.445458] NET: Registered protocol family 1
[ 0.445597] checking if image is initramfs...<7>Switched to high
resolution mode on CPU 1
[ 0.513288] Switched to high resolution mode on CPU 0
[ 0.805200] it is
[ 1.182527] Freeing initrd memory: 6526k freed
[ 1.186530] Simple Boot Flag at 0x37 set to 0x1
[ 1.186956] audit: initializing netlink socket (disabled)
[ 1.186956] type=2000 audit(1236838676.176:1): initialized
[ 1.186956] Total HugeTLB memory allocated, 0
[ 1.186956] VFS: Disk quotas dquot_6.5.1
[ 1.186956] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.186956] msgmni has been set to 4011
[ 1.188979] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.188988] io scheduler noop registered
[ 1.188992] io scheduler anticipatory registered
[ 1.188997] io scheduler deadline registered
[ 1.189014] io scheduler cfq registered (default)
[ 1.189031] pci 0000:00:02.0: Boot video device
[ 1.190954] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.190954] assign_interrupt_mode Found MSI capability
[ 1.190954] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.190954] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.190954] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.190954] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.190954] assign_interrupt_mode Found MSI capability
[ 1.190954] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.190954] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.190954] Allocate Port Service[0000:00:1c.1:pcie03]
[ 1.190954] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.190954] assign_interrupt_mode Found MSI capability
[ 1.190954] Allocate Port Service[0000:00:1c.2:pcie00]
[ 1.190954] Allocate Port Service[0000:00:1c.2:pcie02]
[ 1.190954] Allocate Port Service[0000:00:1c.2:pcie03]
[ 1.190954] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.190954] assign_interrupt_mode Found MSI capability
[ 1.190954] Allocate Port Service[0000:00:1c.3:pcie00]
[ 1.190954] Allocate Port Service[0000:00:1c.3:pcie02]
[ 1.190954] Allocate Port Service[0000:00:1c.3:pcie03]
[ 1.190954] vesafb: framebuffer at 0xd0000000, mapped to
0xffffc20010980000, using 3072k, total 7616k
[ 1.190954] vesafb: mode is 1024x768x16, linelength=2048, pages=3
[ 1.190959] vesafb: scrolling: redraw
[ 1.190959] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.209351] Console: switching to colour frame buffer device 128x48
[ 1.226557] fb0: VESA VGA frame buffer device
[ 1.230558] hpet_resources: 0xfed00000 is busy
[ 1.230558] Linux agpgart interface v0.103
[ 1.230558] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 1.230558] pnp: the driver 'serial' has been registered
[ 1.234559] brd: module loaded
[ 1.234559] input: Macintosh mouse button emulation as
/class/input/input0
[ 1.234559] pnp: the driver 'i8042 kbd' has been registered
[ 1.234559] i8042 kbd 00:08: driver attached
[ 1.234559] pnp: the driver 'i8042 aux' has been registered
[ 1.234559] i8042 aux 00:09: driver attached
[ 1.234559] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.269127] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.269287] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.290522] mice: PS/2 mouse device common for all mice
[ 1.290522] pnp: the driver 'rtc_cmos' has been registered
[ 1.290522] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.290522] rtc0: alarms up to one month, y3k
[ 1.290522] rtc_cmos 00:07: driver attached
[ 1.290522] cpuidle: using governor ladder
[ 1.290522] cpuidle: using governor menu
[ 1.290522] No iBFT detected.
[ 1.290522] TCP cubic registered
[ 1.290522] NET: Registered protocol family 17
[ 1.290522] registered taskstats version 1
[ 1.290522] rtc_cmos 00:07: setting system clock to 2009-03-12
06:17:57 UTC (1236838677)
[ 1.290522] Freeing unused kernel memory: 392k freed
[ 1.308946] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.417371] ACPI: SSDT 7F6D8349, 01B4 (r1 PmRef Cpu0Ist 3000
INTL 20050624)
[ 1.421555] ACPI: SSDT 7F6D7E1A, 04AA (r1 PmRef Cpu0Cst 3001
INTL 20050624)
[ 1.429431] Monitor-Mwait will be used to enter C-1 state
[ 1.429431] Monitor-Mwait will be used to enter C-2 state
[ 1.429431] Monitor-Mwait will be used to enter C-3 state
[ 1.429431] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.436718] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.440724] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.445196] ACPI: SSDT 7F6D84FD, 00C8 (r1 PmRef Cpu1Ist 3000
INTL 20050624)
[ 1.449996] ACPI: SSDT 7F6D82C4, 0085 (r1 PmRef Cpu1Cst 3000
INTL 20050624)
[ 1.455657] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.455657] Marking TSC unstable due to TSC halts in idle
[ 1.466128] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.470898] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.478983] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 1.490897] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.502109] ACPI: Thermal Zone [TZ00] (45 C)
[ 1.866244] USB Universal Host Controller Interface driver v3.0
[ 1.871994] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 1.879942] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 1.879950] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.885995] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 1.892267] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.898267] usb usb1: configuration #1 chosen from 1 choice
[ 1.904373] hub 1-0:1.0: USB hub found
[ 1.910755] hub 1-0:1.0: 2 ports detected
[ 1.978659] sdhci: Secure Digital Host Controller Interface driver
[ 1.981859] sdhci: Copyright(c) Pierre Ossman
[ 2.012075] Uniform Multi-Platform E-IDE driver
[ 2.016698] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 2.024089] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.024092] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.024095] usb usb1: Product: UHCI Host Controller
[ 2.024097] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 2.024099] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.058892] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level,
low) -> IRQ 21
[ 2.087934] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 2.087942] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.094742] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 2
[ 2.101778] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 2.107895] usb usb2: configuration #1 chosen from 1 choice
[ 2.114606] hub 2-0:1.0: USB hub found
[ 2.121438] hub 2-0:1.0: 2 ports detected
[ 2.233423] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.237713] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.245715] usb usb2: Product: UHCI Host Controller
[ 2.252725] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 2.259696] usb usb2: SerialNumber: 0000:00:1a.1
[ 2.269460] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level,
low) -> IRQ 18
[ 2.276484] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 2.276490] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.283603] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 3
[ 2.293800] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.300652] PCI: cache line size of 32 is not supported by device
0000:00:1a.7
[ 2.300669] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504000
[ 2.322177] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 2.328815] usb usb3: configuration #1 chosen from 1 choice
[ 2.336653] hub 3-0:1.0: USB hub found
[ 2.342272] hub 3-0:1.0: 4 ports detected
[ 2.450791] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.457385] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.463913] usb usb3: Product: EHCI Host Controller
[ 2.470420] usb usb3: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 2.476985] usb usb3: SerialNumber: 0000:00:1a.7
[ 2.488989] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level,
low) -> IRQ 23
[ 2.495196] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.495202] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.501911] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 4
[ 2.508546] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 2.515004] usb usb4: configuration #1 chosen from 1 choice
[ 2.521553] hub 4-0:1.0: USB hub found
[ 2.527647] hub 4-0:1.0: 2 ports detected
[ 2.555749] Clocksource tsc unstable (delta = -181512493 ns)
[ 2.635919] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.642438] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.649013] usb usb4: Product: UHCI Host Controller
[ 2.655398] usb usb4: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 2.664533] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.671013] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
low) -> IRQ 19
[ 2.674589] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.674596] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.684976] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 5
[ 2.691966] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 2.698340] usb usb5: configuration #1 chosen from 1 choice
[ 2.704825] hub 5-0:1.0: USB hub found
[ 2.711166] hub 5-0:1.0: 2 ports detected
[ 2.819914] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.826407] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.833039] usb usb5: Product: UHCI Host Controller
[ 2.839399] usb usb5: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 2.845794] usb usb5: SerialNumber: 0000:00:1d.1
[ 2.853099] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level,
low) -> IRQ 18
[ 2.855611] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.855618] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.866038] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 6
[ 2.869211] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 2.883654] usb usb6: configuration #1 chosen from 1 choice
[ 2.883701] hub 6-0:1.0: USB hub found
[ 2.888493] hub 6-0:1.0: 2 ports detected
[ 2.997430] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.002191] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.008826] usb usb6: Product: UHCI Host Controller
[ 3.017525] usb usb6: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 3.023911] usb usb6: SerialNumber: 0000:00:1d.2
[ 3.036909] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level,
low) -> IRQ 23
[ 3.036940] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.039460] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.045971] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 7
[ 3.053669] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.058848] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 3.058854] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8504400
[ 3.084122] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 3.090632] usb usb7: configuration #1 chosen from 1 choice
[ 3.100028] hub 7-0:1.0: USB hub found
[ 3.102459] hub 7-0:1.0: 6 ports detected
[ 3.211827] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.218143] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.228801] usb usb7: Product: EHCI Host Controller
[ 3.231608] usb usb7: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 3.237968] usb usb7: SerialNumber: 0000:00:1d.7
[ 3.248802] tg3.c:v3.92.1 (June 9, 2008)
[ 3.254856] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level,
low) -> IRQ 19
[ 3.261672] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 3.559769] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI
Express) 10/100Base-TX Ethernet 00:1b:38:99:63:97
[ 3.570296] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0]
WireSpeed[0] TSOcap[1]
[ 3.574106] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.583719] ACPI: PCI Interrupt 0000:08:06.0[A] -> GSI 22 (level,
low) -> IRQ 22
[ 3.645553] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]
MMIO=[f8200000-f82007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.665555] sdhci: SDHCI controller found at 0000:08:06.1 [1180:0822]
(rev 22)
[ 3.673370] ACPI: PCI Interrupt 0000:08:06.1[B] -> GSI 23 (level,
low) -> IRQ 23
[ 3.681373] mmc0: Will use DMA mode even though HW doesn't fully
claim to support it.
[ 3.689462] mmc0: SDHCI at 0xf8200800 irq 23 DMA
[ 3.713910] No dock devices found.
[ 3.728441] SCSI subsystem initialized
[ 3.744446] libata version 3.00 loaded.
[ 3.744447] ata_piix 0000:00:1f.2: version 2.12
[ 3.744447] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level,
low) -> IRQ 19
[ 3.749069] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.879335] usb 7-1: new high speed USB device using ehci_hcd and
address 2
[ 3.911976] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.912514] scsi0 : ata_piix
[ 3.920489] scsi1 : ata_piix
[ 3.932405] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0
irq 14
[ 3.933262] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8
irq 15
[ 4.024478] usb 7-1: configuration #1 chosen from 1 choice
[ 4.036894] hub 7-1:1.0: USB hub found
[ 4.037205] hub 7-1:1.0: 4 ports detected
[ 4.150754] usb 7-1: New USB device found, idVendor=05e3, idProduct=0608
[ 4.156081] usb 7-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 4.163279] usb 7-1: Product: USB2.0 Hub
[ 4.275325] ata2.00: ATAPI: Optiarc DVD RW AD-7560A, D802, max UDMA/33
[ 4.301156] ata2.00: configured for UDMA/33
[ 4.305209] isa bounce pool size: 16 pages
[ 4.315412] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7560A
D802 PQ: 0 ANSI: 5
[ 4.344663] Driver 'sr' needs updating - please use bus_type methods
[ 4.361155] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 4.361680] Uniform CD-ROM driver Revision: 3.20
[ 4.373766] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.388912] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 4.432975] usb 7-3: new high speed USB device using ehci_hcd and
address 3
[ 4.594282] usb 7-3: configuration #1 chosen from 1 choice
[ 4.614374] usb 7-3: New USB device found, idVendor=0bc2, idProduct=3010
[ 4.622138] usb 7-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4.632438] usb 7-3: Product: FreeAgent Pro
[ 4.640191] usb 7-3: Manufacturer: Seagate
[ 4.647810] usb 7-3: SerialNumber: 5QD0KZH9
[ 4.653169] Initializing USB Mass Storage driver...
[ 4.890641] usb 7-4: new high speed USB device using ehci_hcd and
address 4
[ 4.952273] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00023f7aaf401d1f]
[ 5.042205] usb 7-4: configuration #1 chosen from 1 choice
[ 5.052656] usb 7-4: New USB device found, idVendor=04f2, idProduct=b008
[ 5.060459] usb 7-4: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 5.065339] usb 7-4: Product: USB 2.0 Camera
[ 5.073038] usb 7-4: Manufacturer: Sonix Technology Co., Ltd.
[ 5.081243] usb 7-4: SerialNumber: SN0001
[ 5.290193] usb 7-1.2: new low speed USB device using ehci_hcd and
address 5
[ 5.398356] usb 7-1.2: configuration #1 chosen from 1 choice
[ 5.407713] usb 7-1.2: New USB device found, idVendor=09da,
idProduct=0006
[ 5.414892] usb 7-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 5.421781] usb 7-1.2: Product: USB Optical Mouse
[ 5.426537] usb 7-1.2: Manufacturer: A4Tech
[ 5.636413] usb 7-1.3: new high speed USB device using ehci_hcd and
address 6
[ 5.736405] usb 7-1.3: configuration #1 chosen from 1 choice
[ 5.743900] usb 7-1.3: New USB device found, idVendor=0781,
idProduct=5406
[ 5.750814] usb 7-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 5.755816] usb 7-1.3: Product: U3 Cruzer Micro
[ 5.762714] usb 7-1.3: Manufacturer: SanDisk
[ 5.769654] usb 7-1.3: SerialNumber: 1740031168C230A1
[ 5.782899] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.788392] scsi3 : SCSI emulation for USB Mass Storage devices
[ 5.794209] usb-storage: device found at 3
[ 5.794212] usb-storage: waiting for device to settle before scanning
[ 5.801083] usb-storage: device found at 6
[ 5.801083] usb-storage: waiting for device to settle before scanning
[ 5.801367] usbcore: registered new interface driver usb-storage
[ 5.805906] USB Mass Storage support registered.
[ 5.817225] usbcore: registered new interface driver hiddev
[ 5.828572] input: A4Tech USB Optical Mouse as /class/input/input2
[ 5.865775] input,hidraw0: USB HID v1.00 Mouse [A4Tech USB Optical
Mouse] on usb-0000:00:1d.7-1.2
[ 5.872279] usbcore: registered new interface driver usbhid
[ 5.879463] usbhid: v2.6:USB HID core driver
[ 10.804311] usb-storage: device scan complete
[ 10.809807] usb-storage: device scan complete
[ 10.809807] scsi 2:0:0:0: Direct-Access Seagate FreeAgent Pro
400B PQ: 0 ANSI: 4
[ 10.817242] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 10.830105] scsi 3:0:0:0: Direct-Access SanDisk Cruzer
8.01 PQ: 0 ANSI: 0 CCS
[ 10.835830] Driver 'sd' needs updating - please use bus_type methods
[ 10.846374] scsi 3:0:0:1: CD-ROM SanDisk Cruzer
8.01 PQ: 0 ANSI: 0
[ 10.850828] scsi 3:0:0:0: Attached scsi generic sg2 type 0
[ 10.862649] sd 2:0:0:0: [sda] 1465149168 512-byte hardware sectors
(750156 MB)
[ 10.871821] sr1: scsi3-mmc drive: 48x/48x tray
[ 10.875668] sr 3:0:0:1: Attached scsi CD-ROM sr1
[ 10.875722] sr 3:0:0:1: Attached scsi generic sg3 type 5
[ 10.883669] sd 2:0:0:0: [sda] Write Protect is off
[ 10.893968] sd 2:0:0:0: [sda] Mode Sense: 1c 00 00 00
[ 10.893968] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 10.905191] sd 2:0:0:0: [sda] 1465149168 512-byte hardware sectors
(750156 MB)
[ 10.914827] sd 2:0:0:0: [sda] Write Protect is off
[ 10.920556] sd 2:0:0:0: [sda] Mode Sense: 1c 00 00 00
[ 10.920560] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 10.927284] sda: sda1 sda2 sda3 sda4 <<6>sr 3:0:0:1: [sr1] Result:
hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 10.952239] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 10.957735] sr 3:0:0:1: [sr1] sda5Add. Sense: No additional sense
information
[ 10.965529] end_request: I/O error, dev sr1, sector 196352
[ 10.975512] Buffer I/O error on device sr1, logical block 49088
[ 10.975512] sda6<6>sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 10.991177] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.000133] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.007395] end_request: I/O error, dev sr1, sector 196356
[ 11.014620] Buffer I/O error on device sr1, logical block 49089
[ 11.017911] sda7<6>sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.026218] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.034995] sda8<6>sr 3:0:0:1: [sr1] Add. Sense: No additional sense
information
[ 11.045738] end_request: I/O error, dev sr1, sector 196352
[ 11.049342] Buffer I/O error on device sr1, logical block 49088
[ 11.053348] sda9 sda10<6>sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.065146] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.077142] sr 3:0:0:1: [sr1] Add. Sense: No additional sense
information sda11
[ 11.080921] end_request: I/O error, dev sr1, sector 196356
[ 11.088883] Buffer I/O error on device sr1, logical block 49089
[ 11.104453] sda12 >
[ 11.112323] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.112853] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.124855] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.133909] end_request: I/O error, dev sr1, sector 196584
[ 11.137973] Buffer I/O error on device sr1, logical block 49146
[ 11.149921] Buffer I/O error on device sr1, logical block 49147
[ 11.151202] sd 2:0:0:0: [sda] Attached SCSI disk
[ 11.172376] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.176354] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.184345] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.192285] end_request: I/O error, dev sr1, sector 196584
[ 11.200018] Buffer I/O error on device sr1, logical block 49146
[ 11.213594] sd 3:0:0:0: [sdb] 7843839 512-byte hardware sectors (4016 MB)
[ 11.222104] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.226559] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.234563] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.242733] end_request: I/O error, dev sr1, sector 196588
[ 11.250456] Buffer I/O error on device sr1, logical block 49147
[ 11.263007] sd 3:0:0:0: [sdb] Write Protect is off
[ 11.270910] sd 3:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 11.270913] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 11.285094] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.289078] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.296929] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.308923] end_request: I/O error, dev sr1, sector 196600
[ 11.316717] Buffer I/O error on device sr1, logical block 49150
[ 11.325553] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.331784] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.339787] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.347683] end_request: I/O error, dev sr1, sector 196600
[ 11.355033] Buffer I/O error on device sr1, logical block 49150
[ 11.367472] sd 3:0:0:0: [sdb] 7843839 512-byte hardware sectors (4016 MB)
[ 11.375616] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.380590] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.388596] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.395772] end_request: I/O error, dev sr1, sector 196600
[ 11.407112] sd 3:0:0:0: [sdb] Write Protect is off
[ 11.414625] sd 3:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 11.414628] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 11.422133] sdb:<6>sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.427428] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.435146] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.442719] end_request: I/O error, dev sr1, sector 196600
[ 11.453662] sdb1
[ 11.463109] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.465979] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.473980] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.481400] end_request: I/O error, dev sr1, sector 196600
[ 11.491622] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 11.503606] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.511174] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.515588] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.523576] end_request: I/O error, dev sr1, sector 196600
[ 11.536437] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.544450] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.552087] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.559670] end_request: I/O error, dev sr1, sector 196600
[ 11.573490] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.575043] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.587035] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.590239] end_request: I/O error, dev sr1, sector 196536
[ 11.602723] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.610176] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.617807] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.625124] end_request: I/O error, dev sr1, sector 196540
[ 11.638497] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.644127] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.652125] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.659838] end_request: I/O error, dev sr1, sector 196592
[ 11.670683] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.680717] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.688401] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.696186] end_request: I/O error, dev sr1, sector 196596
[ 11.710381] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.717495] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.725319] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.733182] end_request: I/O error, dev sr1, sector 196600
[ 11.742704] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 11.751166] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 11.759163] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 11.766982] end_request: I/O error, dev sr1, sector 196600
[ 12.380216] PM: Starting manual resume from disk
[ 12.451622] kjournald starting. Commit interval 5 seconds
[ 12.451622] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.735067] udevd version 125 started
[ 14.035711] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.051742] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.059804] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.068026] end_request: I/O error, dev sr1, sector 196352
[ 14.080112] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.088117] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.094401] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.102391] end_request: I/O error, dev sr1, sector 196356
[ 14.116113] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.123792] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.131861] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.137326] end_request: I/O error, dev sr1, sector 196352
[ 14.148891] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.156927] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.164998] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.173059] end_request: I/O error, dev sr1, sector 196356
[ 14.184114] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.192140] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.200041] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.205229] end_request: I/O error, dev sr1, sector 196584
[ 14.215825] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.223936] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.232103] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.240744] end_request: I/O error, dev sr1, sector 196584
[ 14.256198] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.260172] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.268459] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.276717] end_request: I/O error, dev sr1, sector 196588
[ 14.290167] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.299523] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.305366] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.313516] end_request: I/O error, dev sr1, sector 196600
[ 14.327968] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.334865] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.343064] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.351183] end_request: I/O error, dev sr1, sector 196600
[ 14.363728] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.369212] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.377365] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.385618] end_request: I/O error, dev sr1, sector 196600
[ 14.400891] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.408922] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.417272] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.425706] end_request: I/O error, dev sr1, sector 196600
[ 14.441668] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.449699] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.460973] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.469172] end_request: I/O error, dev sr1, sector 196600
[ 14.483888] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.491775] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.499941] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.504488] end_request: I/O error, dev sr1, sector 196600
[ 14.520107] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.528131] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.535250] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.542417] end_request: I/O error, dev sr1, sector 196600
[ 14.554229] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.565218] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.570419] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.578497] end_request: I/O error, dev sr1, sector 196536
[ 14.592450] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.597000] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.605121] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.613324] end_request: I/O error, dev sr1, sector 196592
[ 14.625947] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.631134] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.643151] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.651350] end_request: I/O error, dev sr1, sector 196596
[ 14.661134] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.666884] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.675157] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.683473] end_request: I/O error, dev sr1, sector 196600
[ 14.696866] sr 3:0:0:1: [sr1] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 14.703704] sr 3:0:0:1: [sr1] Sense Key : No Sense [current]
[ 14.711958] sr 3:0:0:1: [sr1] Add. Sense: No additional sense information
[ 14.719979] end_request: I/O error, dev sr1, sector 196600
[ 15.041562] input: Power Button (FF) as /class/input/input3
[ 15.053272] agpgart: Detected an Intel 965GM Chipset.
[ 15.061960] agpgart: Detected 7676K stolen memory.
[ 15.081273] agpgart: AGP aperture is 256M @ 0xd0000000
[ 15.139447] ACPI: Power Button (FF) [PWRF]
[ 15.147318] input: Lid Switch as /class/input/input4
[ 15.175166] ACPI: Lid Switch [LID0]
[ 15.182732] input: Power Button (CM) as /class/input/input5
[ 15.235052] ACPI: Power Button (CM) [PWRB]
[ 15.242419] input: Sleep Button (CM) as /class/input/input6
[ 15.288641] ACPI: Sleep Button (CM) [SLPB]
[ 15.306701] ACPI: WMI: Mapper loaded
[ 15.350944] ACPI: device:05 is registered as cooling_device2
[ 15.361570] input: Video Bus as /class/input/input7
[ 15.427793] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 15.446703] ACPI: device:0b is registered as cooling_device3
[ 15.460027] input: Video Bus as /class/input/input8
[ 15.518904] ACPI: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 15.530568] ACPI: AC Adapter [ACAD] (on-line)
[ 16.229300] ACPI: Battery Slot [BAT1] (battery present)
[ 16.415002] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 16.445734] Linux video capture interface: v2.00
[ 16.469255] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level,
low) -> IRQ 19
[ 16.549100] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b008)
[ 16.560369] input: USB 2.0 Camera as /class/input/input9
[ 16.588308] usbcore: registered new interface driver uvcvideo
[ 16.597597] USB Video Class driver (v0.1.0)
[ 16.702124] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network
Connection driver for Linux, 1.2.26ks
[ 16.706174] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 16.714238] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 16.722187] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 16.722222] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 16.792607] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 16.800528] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 16.952538] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 17.064561] input: PS/2 Mouse as /class/input/input10
[ 17.171810] input: AlpsPS/2 ALPS GlidePoint as /class/input/input11
[ 17.191381] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level,
low) -> IRQ 22
[ 17.199038] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 17.223219] input: PC Speaker as /class/input/input12
[ 17.224308] iTCO_wdt: Found a ICH8M TCO device (Version=2,
TCOBASE=0x1060)
[ 17.224308] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.323315] Adding 1437808k swap on /dev/sda3. Priority:-1 extents:1
across:1437808k
[ 18.770885] EXT3 FS on sda6, internal journal
[ 19.429860] loop: module loaded
[ 19.704453] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 19.840429] kjournald starting. Commit interval 5 seconds
[ 19.848989] EXT3 FS on sda12, internal journal
[ 19.856644] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.124881] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 23.132346] tg3: eth0: Flow control is on for TX and on for RX.
[ 29.957883] NET: Registered protocol family 10
[ 29.965828] lo: Disabled Privacy Extensions
[ 40.434611] eth0: no IPv6 routers present
[ 49.127215] pnp: the driver 'parport_pc' has been registered
[ 49.128860] lp: driver loaded but no devices found
[ 49.190635] ppdev: user-space parallel port driver
[ 51.045083] RPC: Registered udp transport module.
[ 51.053696] RPC: Registered tcp transport module.
[ 51.144306] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 51.218334] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 51.247219] NFSD: starting 90-second grace period
[ 54.712728] Bluetooth: Core ver 2.11
[ 54.731398] NET: Registered protocol family 31
[ 54.739390] Bluetooth: HCI device and connection manager initialized
[ 54.751380] Bluetooth: HCI socket layer initialized
[ 54.818245] Bluetooth: L2CAP ver 2.9
[ 54.829491] Bluetooth: L2CAP socket layer initialized
[ 54.945804] Bluetooth: RFCOMM socket layer initialized
[ 54.957402] Bluetooth: RFCOMM TTY layer initialized
[ 54.968393] Bluetooth: RFCOMM ver 1.8
[ 55.127109] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 55.152744] PM: Writing back config space on device 0000:04:00.0 at
offset 1 (was 100102, writing 100106)
[ 55.153052] firmware: requesting iwlwifi-3945-1.ucode
[ 55.258433] Registered led device: iwl-phy0:radio
[ 55.268984] Registered led device: iwl-phy0:assoc
[ 55.280693] Registered led device: iwl-phy0:RX
[ 55.292311] Registered led device: iwl-phy0:TX
[ 55.332632] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 55.362394] NET: Registered protocol family 5
[ 74.757334] eth0: no IPv6 routers present
[ 103.063850] [drm] Initialized drm 1.1.0 20060810
[ 103.075768] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 103.075768] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 103.075768] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 148.472656] CE: hpet increasing min_delta_ns to 15000 nsec
[ 157.373272] CPU0 attaching NULL sched-domain.
[ 157.373272] CPU1 attaching NULL sched-domain.
[ 157.396184] CPU0 attaching sched-domain:
[ 157.396194] domain 0: span 0-1
[ 157.396198] groups: 0 1
[ 157.396205] domain 1: span 0-1
[ 157.396208] groups: 0-1
[ 157.396230] CPU1 attaching sched-domain:
[ 157.396233] domain 0: span 0-1
[ 157.396237] groups: 1 0
[ 157.396242] domain 1: span 0-1
[ 157.396245] groups: 0-1
laptop-1:/home/jj#
Thanks for looking.
--
Jimmy Johnson
Bakersfield, CA. U.S.A.
Registered Linux User #380263
K.I.S.S. (Keep it simple stupid)
Reply to: