[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: AMD64 No sound



Hi Lewis.

In my Dell Vostro, using amd64, I had to put this in /etc/modprobe.d/alsa-base to get the sound working:

options snd-hda-intel model=3stack

Might work for you.

André

On Tue, Jan 13, 2009 at 04:29, M. Lewis <cajun@cajuninc.com> wrote:
Javier Barroso wrote:
Hello,

On Mon, Jan 12, 2009 at 12:54 PM, Bob <spam@homeurl.co.uk> wrote:
M. Lewis wrote:
I decided to change from 686 to AMD64 architecture after all the buzz
the past few days about the virtues of using the AMD64 architecture. After
installing Lenny, I have no sound at all. (with 686, I had sound from the
install, no problem).

moe:~# lspci | grep -i audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
You want to read the bit on snd-hda-intel in
/usr/share/doc/alsa-base/driver/ALSA-Configuration.txt
try to identify your card and put a line a bit like this in
/etc/modprobe.d/alsa-base
options snd-hda-intel model=6stack-dig position_fix=1
>From [1] your could probe another line in /etc/modprobe.d/alsa-base
options snd-hda-intel model=acer position_fix=1

[1] http://www.esdebian.org/foro/21968/problemas-sonido-debian-lenny-64bits-ati-technologies-inc-sbx00-solucionado

In the last post they say "thanks", but I'm not sure if the sound worked again

Regards,

Unfortunately Javier, that didn't resolve the issue. Still no sound.
Thanks,
Mike
--

 State-of-the-practice: What we can do with the money you have.
 00:25:02 up 1 min,  1 user,  load average: 1.11, 0.44, 0.16


 Linux Registered User #241685  http://counter.li.org


--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org



Reply to: