Re: k3b & brasero don't work, nerolinux does
On Sun, Dec 28, 2008 at 08:33:26PM -0500, Paul Cartwright wrote:
> I've been having problems burning DVDs using K3B recently. I know I used to do
> this, not too long ago, maybe 2-3 months..
> Now I'm getting errors, and K3B says it burns the DVD, then ejects it, but it
> is empty. Or it stops about 30% of the way and errors out. I've tried slowing
> down the burn rate, no luck. I have no clue what to do. I even tried running
> K3B from a root terminal. When I run k3b to create a video DVD here is the
> console output:
[snip]
> Remaining size: 510:46:45 (LBA 2298495) (4707317760 Bytes)
> Used Size: 00:00:01 (LBA 1) (2048 Bytes)
> (K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 8
> (K3bDevice::Device) /dev/scd0: GET PERFORMANCE reports bogus dataLen: 8
> (K3bDevice::Device) /dev/scd0: Number of supported write speeds via 2A: 4
> (K3bDevice::Device) /dev/scd0 : 8468 KB/s
> (K3bDevice::Device) /dev/scd0 : 7056 KB/s
> (K3bDevice::Device) /dev/scd0 : 4234 KB/s
> (K3bDevice::Device) /dev/scd0 : 2822 KB/s
> (K3bDevice::ScsiCommand) failed:
> command: READ (10) (28)
> errorcode: 70
> sense key: NOT READY (2)
> asc: 3a
> ascq: 0
> (K3bDevice::Device) /dev/scd0: READ 10 failed!
> (K3bDevice::ScsiCommand) failed:
> command: READ (10) (28)
> errorcode: 70
> sense key: NOT READY (2)
> asc: 3a
> ascq: 0
> (K3bDevice::Device) /dev/scd0: READ 10 failed!
> ( did that sequence quite a few more times..)
>
> ---------------------------------------
> it ejected the DVD, said success, yet the DVD is blank
Have you changed/upgraded any hardware, in particular, added any HDs?
Does /var/log/syslog show anything interesting?
Does it work from the command-line, using videotrans or tovid or ...?
If it is a CD/DVD/RW drive, can you rip/burn a cd?
Does it play a known good DVD?
--
Chris.
======
I contend that we are both atheists. I just believe in one fewer god
than you do. When you understand why you dismiss all the other
possible gods, you will understand why I dismiss yours.
-- Stephen F Roberts
Reply to: