Sound disappers after reboot
Here's my dmesg output
----------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-12)
(waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-24)) #1 SMP Mon Dec 15 18:15:07 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007feb0000 (usable)
[ 0.000000] BIOS-e820: 000000007feb0000 - 000000007febe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007febe000 - 000000007fef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fefe000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 523952) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 523952
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 523952
[ 0.000000] On node 0 totalpages: 523952
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292274 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000FA0C0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FEB0000, 003C (r1 121707 RSDT1508 20071217
MSFT 97)
[ 0.000000] ACPI: FACP 7FEB0200, 0084 (r2 121707 FACP1508 20071217
MSFT 97)
[ 0.000000] ACPI: DSDT 7FEB04A0, 50BD (r1 0AAAA 0AAAA000 0
INTL 20051117)
[ 0.000000] ACPI: FACS 7FEBE000, 0040
[ 0.000000] ACPI: APIC 7FEB0390, 0078 (r1 121707 APIC1508 20071217
MSFT 97)
[ 0.000000] ACPI: MCFG 7FEB0410, 003C (r1 121707 OEMMCFG 20071217
MSFT 97)
[ 0.000000] ACPI: WDRT 7FEB0450, 0047 (r1 121707 VT-8237S 20071217
MSFT 97)
[ 0.000000] ACPI: OEMB 7FEBE040, 0061 (r1 121707 OEMB1508 20071217
MSFT 97)
[ 0.000000] ACPI: HPET 7FEB5560, 0038 (r1 121707 VT-8237S 20071217
MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
7fefe000:7ed02000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 519858
[ 0.000000] Kernel command line: root=/dev/sda2 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2000.179 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2067936k/2095808k available (1769k kernel code,
26668k reserved, 752k data, 244k init, 1178304k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba46b - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba46b (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083837] Calibrating delay using timer specific routine..
4003.06 BogoMIPS (lpj=8006133)
[ 0.083874] Security Framework initialized
[ 0.083881] SELinux: Disabled at boot.
[ 0.083886] Capability LSM initialized
[ 0.083900] Mount-cache hash table entries: 512
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 1024K
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] Intel machine check architecture supported.
[ 0.084005] Intel machine check reporting enabled on CPU#0.
[ 0.084005] using mwait in idle threads.
[ 0.084005] Checking 'hlt' instruction... OK.
[ 0.100006] ACPI: Core revision 20080321
[ 0.108006] ENABLING IO-APIC IRQs
[ 0.108006] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.147644] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
[ 0.148009] Booting processor 1/1 ip 6000
[ 0.156009] Initializing CPU#1
[ 0.156009] Calibrating delay using timer specific routine..
4000.13 BogoMIPS (lpj=8000275)
[ 0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.156009] CPU: L2 cache: 1024K
[ 0.156009] CPU: Physical Processor ID: 0
[ 0.156009] CPU: Processor Core ID: 1
[ 0.156009] Intel machine check architecture supported.
[ 0.156009] Intel machine check reporting enabled on CPU#1.
[ 0.236014] CPU1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
[ 0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.240015] Brought up 2 CPUs
[ 0.240015] Total of 2 processors activated (8003.20 BogoMIPS).
[ 0.240015] CPU0 attaching sched-domain:
[ 0.240015] domain 0: span 0-1
[ 0.240015] groups: 0 1
[ 0.240015] CPU1 attaching sched-domain:
[ 0.240015] domain 0: span 0-1
[ 0.240015] groups: 1 0
[ 0.240015] net_namespace: 660 bytes
[ 0.240015] Booting paravirtualized kernel on bare hardware
[ 0.240015] NET: Registered protocol family 16
[ 0.240015] ACPI: bus type pci registered
[ 0.240015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.240015] PCI: Not using MMCONFIG.
[ 0.240015] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.240015] PCI: Using configuration type 1 for base access
[ 0.240015] Setting up standard PCI resources
[ 0.248015] ACPI: EC: Look up EC in DSDT
[ 0.260249] ACPI: Interpreter enabled
[ 0.260252] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.260267] ACPI: Using IOAPIC for interrupt routing
[ 0.260325] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.264552] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.264552] PCI: Using MMCONFIG for extended config space
[ 0.272855] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.272855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.273174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.273258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.276487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[ 0.276616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.291975] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 0.291975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.295975] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.295975] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.295975] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.295975] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.295975] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.295975] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.295975] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.295975] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.295975] ACPI Warning (tbutils-0217): Incorrect checksum in
table [OEMB] - 6F, should be 62 [20080321]
[ 0.295975] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.295975] pnp: PnP ACPI init
[ 0.295975] ACPI: bus type pnp registered
[ 0.299975] pnp: PnP ACPI: found 16 devices
[ 0.299975] ACPI: ACPI bus type pnp unregistered
[ 0.299975] PnPBIOS: Disabled by ACPI PNP
[ 0.299975] PCI: Using ACPI for IRQ routing
[ 0.304475] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.304480] hpet0: 3 32-bit timers, 14318180 Hz
[ 0.305530] ACPI: RTC can wake from S4
[ 0.312464] system 00:07: ioport range 0x3e0-0x3e7 has been reserved
[ 0.312467] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.312470] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.312473] system 00:07: ioport range 0x400-0x41f has been reserved
[ 0.312476] system 00:07: iomem range 0xfecc0000-0xfecc0fff could
not be reserved
[ 0.312479] system 00:07: iomem range 0xfed02000-0xfed02fff has been reserved
[ 0.312486] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.312489] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.312495] system 00:0c: iomem range 0xfec00000-0xfec00fff could
not be reserved
[ 0.312498] system 00:0c: iomem range 0xfee00000-0xfee00fff could
not be reserved
[ 0.312503] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.312510] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.312512] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
[ 0.312515] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.312518] system 00:0e: iomem range 0x100000-0x7fefffff could not
be reserved
[ 0.312521] system 00:0e: iomem range 0xfec00000-0xffffffff could
not be reserved
[ 0.343974] PCI: Bridge: 0000:00:01.0
[ 0.343974] IO window: disabled.
[ 0.343974] MEM window: disabled.
[ 0.343974] PREFETCH window: disabled.
[ 0.343974] PCI: Bridge: 0000:00:02.0
[ 0.343974] IO window: e000-efff
[ 0.343974] MEM window: 0xfa000000-0xfeafffff
[ 0.343974] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.343974] PCI: Bridge: 0000:00:03.0
[ 0.343974] IO window: disabled.
[ 0.343974] MEM window: disabled.
[ 0.343974] PREFETCH window: disabled.
[ 0.343974] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.343974] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level,
low) -> IRQ 27
[ 0.343974] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.343974] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level,
low) -> IRQ 31
[ 0.343974] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.343974] NET: Registered protocol family 2
[ 0.357388] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.357619] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.359559] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.359931] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.359934] TCP reno registered
[ 0.366846] NET: Registered protocol family 1
[ 0.366972] checking if image is initramfs...<7>Switched to high
resolution mode on CPU 1
[ 0.510430] Switched to high resolution mode on CPU 0
[ 0.593362] it is
[ 0.838670] Freeing initrd memory: 6037k freed
[ 0.839588] audit: initializing netlink socket (disabled)
[ 0.839588] type=2000 audit(1230807986.828:1): initialized
[ 0.839593] highmem bounce pool size: 64 pages
[ 0.839593] Total HugeTLB memory allocated, 0
[ 0.839593] VFS: Disk quotas dquot_6.5.1
[ 0.839593] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.839593] msgmni has been set to 1750
[ 0.839593] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.839593] io scheduler noop registered
[ 0.839593] io scheduler anticipatory registered
[ 0.839593] io scheduler deadline registered
[ 0.839593] io scheduler cfq registered (default)
[ 0.839593] PCI: VIA PCI bridge detected.Disabling DAC.
[ 0.843590] pci 0000:02:00.0: Boot video device
[ 0.843590] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.843590] assign_interrupt_mode Found MSI capability
[ 0.843590] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.843590] Allocate Port Service[0000:00:02.0:pcie01]
[ 0.843590] Allocate Port Service[0000:00:02.0:pcie02]
[ 0.843590] Allocate Port Service[0000:00:02.0:pcie03]
[ 0.843590] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.843590] assign_interrupt_mode Found MSI capability
[ 0.843590] Allocate Port Service[0000:00:03.0:pcie00]
[ 0.843590] Allocate Port Service[0000:00:03.0:pcie01]
[ 0.843590] Allocate Port Service[0000:00:03.0:pcie02]
[ 0.843590] Allocate Port Service[0000:00:03.0:pcie03]
[ 0.843590] AER service couldn't init device 0000:00:02.0:pcie01 -
no _OSC support
[ 0.845497] AER service couldn't init device 0000:00:03.0:pcie01 -
no _OSC support
[ 0.847589] isapnp: Scanning for PnP cards...
[ 1.203370] isapnp: No Plug & Play device found
[ 1.208173] hpet_resources: 0xfed00000 is busy
[ 1.208173] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[ 1.208173] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.208173] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.208174] brd: module loaded
[ 1.208174] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.208174] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 1.208174] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.208174] mice: PS/2 mouse device common for all mice
[ 1.208174] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 1.208174] rtc0: alarms up to one year, y3k
[ 1.208174] cpuidle: using governor ladder
[ 1.208174] cpuidle: using governor menu
[ 1.208174] No iBFT detected.
[ 1.208565] TCP cubic registered
[ 1.208565] NET: Registered protocol family 17
[ 1.208565] Using IPI No-Shortcut mode
[ 1.208565] registered taskstats version 1
[ 1.208728] rtc_cmos 00:09: setting system clock to 2009-01-01
11:06:28 UTC (1230807988)
[ 1.208842] Freeing unused kernel memory: 244k freed
[ 1.231902] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.288263] ACPI: SSDT 7FEBE0B0, 0214 (r1 AMI CPU1PM 1
INTL 20051117)
[ 1.292151] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.292151] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 1.292151] ACPI: SSDT 7FEBE2D0, 0143 (r1 AMI CPU2PM 1
INTL 20051117)
[ 1.294579] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.294584] ACPI: Processor [CPU2] (supports 16 throttling states)
[ 1.586407] No dock devices found.
[ 1.603856] SCSI subsystem initialized
[ 1.614155] libata version 3.00 loaded.
[ 1.630226] usbcore: registered new interface driver usbfs
[ 1.630226] usbcore: registered new interface driver hub
[ 1.634227] sata_via 0000:00:0f.0: version 2.3
[ 1.634227] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level,
low) -> IRQ 21
[ 1.634227] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.638228] scsi0 : sata_via
[ 1.638228] usbcore: registered new device driver usb
[ 1.638228] Uniform Multi-Platform E-IDE driver
[ 1.638228] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 1.638228] scsi1 : sata_via
[ 1.640968] ata1: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 21
[ 1.640968] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 21
[ 1.657716] USB Universal Host Controller Interface driver v3.0
[ 1.668186] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 1.723686] Floppy drive(s): fd0 is 1.44M
[ 1.740937] FDC 0 is a post-1991 82077
[ 1.850168] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.013843] ata1.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL01, max UDMA/100
[ 2.030346] ata1.00: configured for UDMA/100
[ 2.233641] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.289637] ata2.00: HPA detected: current 156299375, native 156301488
[ 2.289637] ata2.00: ATA-7: SAMSUNG HD080HJ, WT100-41, max UDMA7
[ 2.289637] ata2.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.509931] ata2.00: configured for UDMA/133
[ 2.513306] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM
GH20NS10 EL01 PQ: 0 ANSI: 5
[ 2.513447] scsi 1:0:0:0: Direct-Access ATA SAMSUNG
HD080HJ WT10 PQ: 0 ANSI: 5
[ 2.517615] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level,
low) -> IRQ 20
[ 2.517615] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.517615] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 1
[ 2.517615] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c480
[ 2.517615] usb usb1: configuration #1 chosen from 1 choice
[ 2.517615] hub 1-0:1.0: USB hub found
[ 2.517615] hub 1-0:1.0: 2 ports detected
[ 2.633366] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.633366] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.633366] usb usb1: Product: UHCI Host Controller
[ 2.633366] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.633366] usb usb1: SerialNumber: 0000:00:10.0
[ 2.633366] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level,
low) -> IRQ 22
[ 2.633366] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.633366] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 2
[ 2.633366] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c800
[ 2.633366] usb usb2: configuration #1 chosen from 1 choice
[ 2.633366] hub 2-0:1.0: USB hub found
[ 2.633366] hub 2-0:1.0: 2 ports detected
[ 2.778272] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.778276] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.778279] usb usb2: Product: UHCI Host Controller
[ 2.778280] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.778282] usb usb2: SerialNumber: 0000:00:10.1
[ 2.779646] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level,
low) -> IRQ 21
[ 2.779646] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.779646] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 3
[ 2.779646] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c880
[ 2.779646] usb usb3: configuration #1 chosen from 1 choice
[ 2.779646] hub 3-0:1.0: USB hub found
[ 2.779646] hub 3-0:1.0: 2 ports detected
[ 2.900048] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.900051] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.900054] usb usb3: Product: UHCI Host Controller
[ 2.900055] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 2.900057] usb usb3: SerialNumber: 0000:00:10.2
[ 2.901132] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level,
low) -> IRQ 23
[ 2.901132] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.901132] uhci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 4
[ 2.901132] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000cc00
[ 2.901132] usb usb4: configuration #1 chosen from 1 choice
[ 2.901132] hub 4-0:1.0: USB hub found
[ 2.901132] hub 4-0:1.0: 2 ports detected
[ 2.935651] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 3.001201] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.001201] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.001201] usb usb4: Product: UHCI Host Controller
[ 3.001201] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 3.001201] usb usb4: SerialNumber: 0000:00:10.3
[ 3.001201] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level,
low) -> IRQ 21
[ 3.001201] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 3.001201] ehci_hcd 0000:00:10.4: new USB bus registered, assigned
bus number 5
[ 3.001201] ehci_hcd 0000:00:10.4: debug port 1
[ 3.001201] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9fffc00
[ 3.096280] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 3.096280] usb usb5: configuration #1 chosen from 1 choice
[ 3.096280] hub 5-0:1.0: USB hub found
[ 3.096280] hub 5-0:1.0: 8 ports detected
[ 3.199865] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.199868] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.199870] usb usb5: Product: EHCI Host Controller
[ 3.199872] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 3.199874] usb usb5: SerialNumber: 0000:00:10.4
[ 3.199865] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level,
low) -> IRQ 23
[ 3.199865] eth0: VIA Rhine II at 0x1c000, 00:1d:92:44:2a:d2, IRQ 23.
[ 3.199865] eth0: MII PHY found at address 1, status 0x7849
advertising 01e1 Link 0000.
[ 3.204282] VP_IDE: IDE controller (0x1106:0x0571 rev 0x07) at PCI
slot 0000:00:0f.1
[ 3.204282] VP_IDE: not 100% native mode: will probe irqs later
[ 3.204282] VP_IDE: VIA vt8237s (rev 00) IDE UDMA133 controller on
pci0000:00:0f.1
[ 3.204282] ide0: BM-DMA at 0xfc00-0xfc07
[ 3.204282] ide1: BM-DMA at 0xfc08-0xfc0f
[ 3.204282] Probing IDE interface ide0...
[ 3.235979] Driver 'sr' needs updating - please use bus_type methods
[ 3.243747] Driver 'sd' needs updating - please use bus_type methods
[ 3.247860] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 3.247860] Uniform CD-ROM driver Revision: 3.20
[ 3.247860] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.251860] sd 1:0:0:0: [sda] 156299375 512-byte hardware sectors (80025 MB)
[ 3.251860] sd 1:0:0:0: [sda] Write Protect is off
[ 3.251860] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.251860] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.251860] sd 1:0:0:0: [sda] 156299375 512-byte hardware sectors (80025 MB)
[ 3.251860] sd 1:0:0:0: [sda] Write Protect is off
[ 3.251860] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.251860] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.251860] sda: sda1 sda2 sda3
[ 3.275652] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 3.275652] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.283648] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.526563] usb 1-1: device not accepting address 2, error -71
[ 3.585516] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3.644978] hda: Maxtor 6E040L1, ATA DISK drive
[ 4.336004] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.336153] hda: UDMA/133 mode selected
[ 4.336293] Probing IDE interface ide1...
[ 4.775150] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 4.921080] usb 5-1: configuration #1 chosen from 1 choice
[ 4.921417] usb 5-1: New USB device found, idVendor=067b, idProduct=2506
[ 4.921420] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.921423] usb 5-1: Product: Mass Storage Device
[ 4.921424] usb 5-1: Manufacturer: Prolific Technology Inc.
[ 4.921426] usb 5-1: SerialNumber: 0
[ 4.921432] hub 5-0:1.0: over-current change on port 2
[ 4.943675] Initializing USB Mass Storage driver...
[ 4.956211] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.956646] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.971642] hda: max request size: 512KiB
[ 4.971642] hda: Host Protected Area detected.
[ 4.971642] current capacity is 80291135 sectors (41109 MB)
[ 4.971642] native capacity is 80293248 sectors (41110 MB)
[ 4.987583] hda: Host Protected Area disabled.
[ 4.987583] hda: 80293248 sectors (41110 MB) w/2048KiB Cache,
CHS=16383/255/63
[ 4.987583] hda: cache flushes supported
[ 4.987583] hda: hda1
[ 5.203643] hub 5-0:1.0: over-current change on port 4
[ 5.621738] hub 5-0:1.0: over-current change on port 6
[ 5.725729] hub 5-0:1.0: over-current change on port 8
[ 5.781726] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.781726] usbcore: registered new interface driver usb-storage
[ 5.781726] USB Mass Storage support registered.
[ 5.781726] usb-storage: device found at 2
[ 5.781726] usb-storage: waiting for device to settle before scanning
[ 5.885244] PM: Starting manual resume from disk
[ 5.921911] kjournald starting. Commit interval 5 seconds
[ 5.921911] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.073922] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 6.270772] usb 2-1: configuration #1 chosen from 1 choice
[ 6.270772] usb 2-1: New USB device found, idVendor=15d9, idProduct=0a37
[ 6.270772] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.270772] usb 2-1: Product: USB Mouse
[ 6.580639] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 6.724502] usb 3-1: configuration #1 chosen from 1 choice
[ 6.724502] usb 3-1: New USB device found, idVendor=19d2, idProduct=0001
[ 6.724502] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.724502] usb 3-1: Product: ZTE CDMA Technologies MSM
[ 6.724502] usb 3-1: Manufacturer: Qualcomm, Incorporated
[ 7.388998] udevd version 125 started
[ 8.066547] Linux agpgart interface v0.103
[ 8.068121] agpgart: Detected VIA P4M900 chipset
[ 8.075184] agpgart: AGP aperture is 128M @ 0xf0000000
[ 8.093280] input: Power Button (FF) as /class/input/input1
[ 8.155998] ACPI: Power Button (FF) [PWRF]
[ 8.156105] input: Sleep Button (CM) as /class/input/input2
[ 8.220103] ACPI: Sleep Button (CM) [SLPB]
[ 8.220160] input: Power Button (CM) as /class/input/input3
[ 8.284315] ACPI: Power Button (CM) [PWRB]
[ 8.507765] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.510263] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.677670] usbcore: registered new interface driver usbserial
[ 8.677683] usbserial: USB Serial support registered for generic
[ 8.677726] usbcore: registered new interface driver usbserial_generic
[ 8.677728] usbserial: USB Serial Driver core
[ 8.680985] usbcore: registered new interface driver hiddev
[ 8.693582] input: USB Mouse as /class/input/input4
[ 8.696429] usbserial: USB Serial support registered for GSM modem (1-port)
[ 8.747540] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on
usb-0000:00:10.1-1
[ 8.747573] usbcore: registered new interface driver usbhid
[ 8.747577] usbhid: v2.6:USB HID core driver
[ 8.747946] option 3-1:1.0: GSM modem (1-port) converter detected
[ 8.748012] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 8.748023] option 3-1:1.1: GSM modem (1-port) converter detected
[ 8.748385] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 8.748396] option 3-1:1.2: GSM modem (1-port) converter detected
[ 8.748429] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 8.748440] usbcore: registered new interface driver option
[ 8.748442] option: USB Driver for GSM modems: v0.7.2
[ 8.806472] input: PC Speaker as /class/input/input5
[ 9.011711] parport_pc 00:06: reported by Plug and Play ACPI
[ 9.011711] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.314185] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level,
low) -> IRQ 17
[ 9.314185] PCI: Setting latency timer of device 0000:80:01.0 to 64
[ 9.314185] PCI: Disallowing DAC for device 0000:80:01.0
[ 9.356002] hda_codec: Unknown model for ALC883, trying auto-probe
from BIOS...
[ 10.232611] Adding 3004144k swap on /dev/sda3. Priority:-1
extents:1 across:3004144k
[ 10.799387] EXT3 FS on sda2, internal journal
[ 10.991241] loop: module loaded
[ 11.178669] usb-storage: device scan complete
[ 11.213964] scsi 2:0:0:0: Direct-Access WDC WD12 00BEVE-11UYT0
01.0 PQ: 0 ANSI: 0
[ 11.215445] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 11.216312] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.216315] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 11.216318] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.217440] sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 11.218818] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.218822] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 11.218824] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.218899] sdb: sdb1
[ 11.219547] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 11.219592] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 16.007734] eth0: link down
[ 18.595093] nvidia: module license 'NVIDIA' taints kernel.
[ 18.849674] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level,
low) -> IRQ 24
[ 18.849685] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 18.850821] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09
Wed Jun 4 23:43:17 PDT 2008
[ 34.620658] hda-intel: Invalid position buffer, using LPIB read
method instead.
[ 41.081863] CPU0 attaching NULL sched-domain.
[ 41.081863] CPU1 attaching NULL sched-domain.
[ 41.083230] CPU0 attaching sched-domain:
[ 41.083234] domain 0: span 0-1
[ 41.083237] groups: 0 1
[ 41.083243] CPU1 attaching sched-domain:
[ 41.083245] domain 0: span 0-1
[ 41.083248] groups: 1 0
[ 43.997189] NET: Registered protocol family 10
[ 43.997618] lo: Disabled Privacy Extensions
[ 43.998065] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 162.307552] PPP generic driver version 2.4.2
[ 162.444517] PPP BSD Compression module registered
[ 162.497426] PPP Deflate Compression module registered
--------------------------------------
It worked before and I don't remember changing anything related to
sound. Any idea?
--
Regards,
Umarzuki Mochlis
http://gameornot.net
Reply to: