how to create /dev/ttyACM ?
Hello ,...
I bought a Motorola w375 and i can't connect to it :
lsub :
Bus 001 Device 008: ID 22b8:4061 Motorola PCS
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x22b8 Motorola PCS
idProduct 0x4061
bcdDevice 0.01
iManufacturer 0
iProduct 0
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 498mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0 None
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
dmesg:
[75641.160127] usb 1-1: new full speed USB device using ohci_hcd and
address 8
[79528.612575] usb 1-1: configuration #1 chosen from 1 choice
[79528.614367] usb 1-1: New USB device found, idVendor=22b8, idProduct=4061
[79528.614376] usb 1-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=1
[79528.614380] usb 1-1: SerialNumber: MySerialNumber
but there is no /dev/ttyAM0 interface so i could use it with kmobiletools
--
---==== Jabka Atu ===---
bsh83.blogspot.com
---=== Encryption is a way of life ===---
Reply to: