Re: Burn CD

[hce <webmail.hce@gmail.com>]

On 1/10/08, steef <steefvanduin@zonnet.nl> wrote:
> hce wrote:
> > On 1/8/08, steef <steefvanduin@zonnet.nl> wrote:
> >
> >> hce wrote:
> >>
> >>> Hi,
> >>>
> >>> Is following burn CD command correct? I've got following errors:
> >>>
> >>>
> >>>  $ sudo cdrecord -scanbus
> >>>
> >>>       cdrecord: Warning: controller returns wrong size for CD capabilities page.
> >>>         1,1,0   101) '        ' 'ATAPI CDROM     ' '110B' Removable CD-ROM
> >>>         1,2,0   102) *
> >>>         1,3,0   103) *
> >>>         1,4,0   104) *
> >>>         1,5,0   105) *
> >>>         1,6,0   106) *
> >>>         1,7,0   107) *
> >>>
> >>> $ sudo cdrecord -v -eject speed=1 dev=1,1,0 cd.iso
> >>> cdrecord: No write mode specified.
> >>> cdrecord: Asuming -tao mode.
> >>> cdrecord: Future versions of cdrecord may have different drive
> >>> dependent defaults.
> >>> cdrecord: Continuing in 5 seconds...
> >>>
> >>> TOC Type: 1 = CD-ROM
> >>> scsidev: '1,0,0'
> >>> scsibus: 1 target: 0 lun: 0
> >>> cdrecord: Invalid or incomplete multibyte or wide character. Cannot
> >>> open SCSI driver.
> >>> cdrecord: For possible targets try 'cdrecord -scanbus'.
> >>> cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
> >>>
> >>> Thank you.
> >>>
> >>> Jim
> >>>
> >>>
> >>>
> >>>
> >> hi,
> >>
> >> what are you trying to burn: data, i guess? if so: include -data and
> >> -pad. what i remember of cdrecord: you should point to dev=ATAPI:1,1,0 ,
> >> try further with -tao or -dao within the command.
> >> hope this helps.
> >> reg.,
> >>
> >
> > To burn photos (JPG files) in iso. I tried following command, but failed again:
> >
> > $ sudo cdrecord dev=ATAPI:1,1,0 speed=1 -tao -v -eject cd1.iso
> >
> > TOC Type: 1 = CD-ROM
> > scsidev: 'ATAPI:1,1,0'
> > devname: 'ATAPI'
> > scsibus: 1 target: 1 lun: 0
> > Use of ATA is preferred over ATAPI.
> > Warning: Using ATA Packet interface.
> > Warning: The related Linux kernel interface code seems to be unmaintained.
> > Warning: There is absolutely NO DMA, operations thus are slow.
> > Using libscg version 'schily-0.8'.
> > SCSI buffer size: 64512
> > atapi: 1
> > cdrecord: Warning: controller returns wrong size for CD capabilities page.
> > Device type    : Removable CD-ROM
> > Version        : 0
> > Response Format: 1
> > Vendor_info    : '        '
> > Identifikation : 'ATAPI CDROM     '
> > Revision       : '110B'
> > Device seems to be: Generic mmc CD-ROM.
> > cdrecord: Warning: controller returns wrong size for CD capabilities page.
> > cdrecord: Warning: controller returns wrong size for CD capabilities page.
> > cdrecord: Warning: controller returns wrong size for CD capabilities page.
> > cdrecord: Warning: controller returns wrong size for CD capabilities page.
> > cdrecord: Warning: controller returns wrong size for CD capabilities page.
> > cdrecord: Sorry, no CD/DVD-Recorder or unsupported CD/DVD-Recorder
> > found on this target.
> > cdrecord: Warning: controller returns wron
> >
> > Thanks steef and hth.
> >
> > Jim
> >
> >
> >
> hi,
>
> cdrecord does not seem to accept  your burner.......... strange, but not
> unprecedented. i had a comparable problem with an optiac burner last year.
>
> you *could* try to insert -data and -pad on your commandline, but i do
> not think that will be much of a difference.
>
> in your position i should install wodim. for me wodim ended these problems.

Ok, I am going to install wodim (I've  never used it, may take me days
to learn it). Years ago, seems everyone used cdrecord for burning CD.
Is it in now days that the wodim is more popular than the cdrecord?

Thanks steef and Bob.

Jim