Snmpwalk: Timeout: No Response from 192.168.1.36 (was: "Re: I hope You are satisfied now :))
dunkel <antal.pettermann@gmail.com>:
>
> The original problem was:
> "However if I run "snmpwalk -v 1 -c public 192.168.1.36 system" on the
> stable box, with 192.168.1.36 the IP address of the testing box, i get:
> Timeout: No Response from 192.168.1.36
>
> snmpd is up and running, I can ping both ways, there are no firewalls
> in place. What could be wrong?"
>
> The solution is:
> open snmpd.conf with your favourite editor and
> add these 2 lines:
> interface eth0
> agentaddress [ip address of your host]:[listening port - 161 is the default]
Close.
--
Any technology distinguishable from magic is insufficiently advanced.
(*) http://blinkynet.net/comp/uip5.html Linux Counter #80292
- - http://www.faqs.org/rfcs/rfc1855.html Please, don't Cc: me.
Reply to: