EPSON Stylus Photo R200
I'm having troubles to make the above printer work with Sarge
with usb. Although the messages in linuxprinting.org mention that it
should work (not the CD printing, but as normal printer)
cups refuses to print, and reports "Unable to open USB device
"usb:/dev/usb/lp0": No such device ". I tried all the 16 devices (lp0 to
lp15) without success. Any ideas will be much appreciated.
(BTW I prefer if I stick with Sarge's gimp-print, if possible.)
lsusb gives :
Bus 005 Device 003: ID 0aec:3260 Neodio Technologies Corp. 7-in-1 Card Reader
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 006: ID 04b8:0005 Seiko Epson Corp. Stylus Printer
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
proc reports :
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04b8 ProdID=0005 Rev= 1.00
S: Manufacturer=EPSON
S: Product=USB Printer
S: SerialNumber=M01P20507011602200
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
but neither lpinfo or cups seem to be able to use the printer.
TIA
Reply to: