Can't get hal/udev/hotplug/whatever to mount usb flash card reader
Hi,
I have tried just about everything, so I need some help.
I have installed Gnome 2.8 from sid, including hal, udev, hotplug, ...
I'd expect it to just mount my removable devices when I plug them in,
and it does seem to work with cds, but not with anything usb.
I plug in my usb card reader, and the kernel picks it up, and udev picks
it up, but hal complains about missing events from hotplug and nothing
is mounted.
What do I have to do to get hotplug to find the devices, so I can have
them automounted on a gnome 2.8 desktop.
I need this for my WAF!
I get this output when I plug in the card reader (date and hostname
removed from syslog-lines):
kernel: usb 1-1: new full speed USB device using address 12
kernel: scsi7 : SCSI emulation for USB Mass Storage devices
kernel: Vendor: SanDisk Model: ImageMate CF-SM Rev: 0100
kernel: Type: Direct-Access ANSI SCSI revision: 02
kernel: Attached scsi removable disk sda at scsi7, channel 0, id 0, lun 0
kernel: Attached scsi generic sg0 at scsi7, channel 0, id 0, lun 0, type 0
scsi.agent[10576]: disk at
/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/host7/7:0:0:0
kernel: Vendor: SanDisk Model: ImageMate CF-SM Rev: 0100
kernel: Type: Direct-Access ANSI SCSI revision: 02
kernel: Attached scsi removable disk sdb at scsi7, channel 0, id 0, lun 1
kernel: Attached scsi generic sg1 at scsi7, channel 0, id 0, lun 1, type 0
kernel: USB Mass Storage device found at 12
udev[10612]: creating device node '/dev/sg0'
scsi.agent[10617]: disk at
/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/host7/7:0:0:1
udev[10609]: configured rule in '/etc/udev/rules.d/z_hal-plugdev.rules'
at line 2 applied, 'sda' becomes '%k'
udev[10609]: creating device node '/dev/sda'
udev[10654]: configured rule in '/etc/udev/rules.d/z_hal-plugdev.rules'
at line 2 applied, 'sdb' becomes '%k'
udev[10654]: creating device node '/dev/sdb'
udev[10666]: creating device node '/dev/sg1'
kernel: usb 1-1: control timeout on ep0in
last message repeated 7 times
kernel: usb 1-1: control timeout on ep0in
hald[10310]: Timed out waiting for hotplug event 486. Rebasing to 487
hald[10310]: Timed out waiting for hotplug event 496. Rebasing to 486
--
René Seindal (rene@seindal.dk) http://linux.seindal.dk/
Seindal Consult
Reply to: