[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: partition second hard drive



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Sat, 25 Sep 2004, Douglas G. Pollard Sr. wrote:


This is the output from/sbin/lsmod. Sorry it took so long to get back. had a
configuration problem with kmail.

Module                  Size  Used by    Not tainted
input                   3040   0 (autoclean)
apm                     8492   1 (autoclean)
appletalk              18852  12 (autoclean)
parport_pc             19400   1 (autoclean)
lp                      5952   0
parport                21736   1 [parport_pc lp]
af_packet              11560   1 (autoclean)
emu10k1-gp              1256   0 (unused)
gameport                1388   0 [emu10k1-gp]
usb-uhci               19632   0 (unused)
usbcore                52908   1 [usb-uhci]
emu10k1                50956   2
ac97_codec             11412   0 [emu10k1]
sound                  50280   0 [emu10k1]
soundcore               3268   7 [emu10k1 sound]
ide-scsi                8464   0
scsi_mod               85412   1 [ide-scsi]
natsemi                14112   1
crc32                   2848   0 [natsemi]
agpgart                39396   0 (unused)
ide-cd                 27968   1
cdrom                  25056   0 [ide-cd]
rtc                     6280   0 (autoclean)
ext3                   66600   1 (autoclean)
jbd                    35076   1 (autoclean) [ext3]
ide-detect               288   0 (autoclean) (unused)
via82cxxx               9416   1 (autoclean)
ide-disk               12544   2 (autoclean)
ide-core               93980   3 (autoclean) [ide-scsi ide-cd ide-detect
via82cxxx ide-disk]
unix                   13260 136 (autoclean)

Below is the out in part fromdmesg. I figured this was all you needed if you
need it all I will send.
							Doug


Freeing unused kernel memory: 92k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c596a (rev 05) IDE UDMA33 controller on pci00:07.1
   ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
   ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6E040L0, ATA DISK drive
hdb: Maxtor 88400D8, ATA DISK drive
blk: queue ca8263e0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue ca82651c, I/O limit 4095Mb (mask 0xffffffff)
hdc: LITE-ON CD-RW SOHR-5238S, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG SCR-2432, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=79656/16/63, UDMA(33)
hdb: attached ide-disk driver.
hdb: 16408224 sectors (8401 MB) w/256KiB Cache, CHS=16278/16/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [4998/255/63] p1 p2 < p5 >
/dev/ide/host0/bus0/target1/lun0: [PTBL] [1021/255/63] p1
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 497972k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.



Since you mention that you want to format the disk, I should assume that
there's nothing critical in it.
Formating the disk and re-using it with Debian is simple.
Boot into single user-mode

fdisk /dev/hdb

Create the partitions. Setup your /etc/fstab file.
That's all you'll need to do.

rrs
- -- Ritesh Raj Sarraf
RESEARCHUT -- http://www.researchut.com
Gnupg Key ID: 04F130BC
"Stealing logic from one person is plagiarism, stealing from many is research".
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
Comment: Made with pgp4pine 1.76

iD8DBQFBVl/S4Rhi6gTxMLwRAmCBAKCgb+qtnqgS5v8vKyXxkP9qpqstbgCgmuo7
Sd2+Nki2Ol9NZzvBuEM9q/0=
=L8I2
-----END PGP SIGNATURE-----



Reply to: