Re: cd-rom device loading error
Danilo Horta <horta@hangarnet.com.br> writes:
> I can't mount my cd-rom device, so i tried "dmesg | grep hdc" (my cd-rom
> dispositive) and i got this following msg:
>
> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
> hdc: HL-DT-ST RW/DVD GCGCC-4320B, ATAPI CD/DVD-ROM drive
> hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> hdc: status error: error=0x00
> hdc: drive not ready for command
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: irq timeout: error=0x00
> hdc: ATAPI reset complete
> hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache
>
> Anybody can figure it out?
Since I saw the same messages some time ago on this box here too I had
to gooogle for some answers too.
I found out that in my case I was trying to mount a badly burned CD,
dunno if this is the case here too, have you tried different CD's?
one of the results of my search I kept, dunno if it helps :-(
!From: "Monique Y. Herman" <spam@bounceswoosh.org>
!Subject: Re: Compiling kernel - problems
!Newsgroups: linux.debian.user
!>
!> I've read that these errors indicate something physically wrong with
!> your drive. And that sometimes these errors only show up under
!> significant load -- which is why you may not have seen them before.
!> Check you logs anyway, maybe you'll find some.
!
!I second this. I have an old, old cdrom drive that generally works fine
!for small jobs, but will start spitting out errors similar to the OP's
!during intensive procedures. For example, it freaks out when trying to
!rip CDs to wav.
!
!--
!monique
>
> Thanks in advance
hth :-)
LinuxUser aka Josef Oswald linux.os@chello.at
--
registered-linux-user # 134.818 at http://counter.li.org
The box said Windows, NT or better, so I installed Linux :-)
Reply to: