Re: /dev/md0 and udev

[John L Fjellstad <john-debian@fjellstad.org>]

Richard Weil <rcweil@yahoo.com> writes:

> I'm running Sarge with a 2.6.5 kernel. I'm trying to
> create a RAID 5 array of three disks (though for
> initial setup I'm only using two of three). When I
> reboot, udev does not re-create my /dev/md0 device, so
> the RAID array won't start. Any suggestions?

udev won't create the md? devices because the RAID never notifies
udev/sysfs about it.  The just have a thread about on the udev mailing
list.  You need to create the md? devices manually by putting it in the
/etc/udev/links.conf file

-- 
John L. Fjellstad
web: http://www.fjellstad.org/          Quis custodiet ipsos custodes