sane - scanner question
I'm trying to get my scanner working. It's listed under /proc/bus/usb/ as
shown below. Hotplug loads libusbscanner with some chown errors also shown
below. When I start kooka, I'm not presented with my scanner as an optional
input device. How can I further trace this problem. I guess theres
something wrong with the way the hotplug script is trying to change
permissions on the usb device, but I don't really know where to go from
there. Hotplug, sane and libsane are from unstable.
Thanks,
Chris
/proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.5 uhci_hcd
S: Product=VIA Technologies, Inc. USB
S: SerialNumber=0000:00:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04a9 ProdID=220d Rev= 1.00
S: Manufacturer=Canon
S: Product=CanoScan
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0d7d ProdID=1300 Rev= 0.50
S: Manufacturer=
S: Product=USBDrive2.0
S: SerialNumber=4B3819000941
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
k6:/home/stoffel# /etc/init.d/ho tplug restart
Restarting hotplug subsystem: input
net
pci
usb
input
evbug: blacklisted
evdev: already loaded
evbug: blacklisted
evdev: already loaded
mousedev: already loaded
tsdev: already loaded
net
pci
via-agp: already loaded
pciehp: can't be loaded
missing kernel or user mode driver pciehp
shpchp: can't be loaded
missing kernel or user mode driver shpchp
via82cxxx: already loaded
uhci-hcd: loaded sucessfully
via-agp: already loaded
es1370: already loaded
snd-ens1370: already loaded
bttv: already loaded
bt878: already loaded
btaudio: already loaded
snd-bt87x: already loaded
8139cp: already loaded
8139too: already loaded
ignore pci display device on 01:00.0
usb
libusbscanner: loaded sucessfully
chown: failed to get attributes of `': No such file or directory
chmod: failed to get attributes of `': No such file or directory
libusbscanner: loaded sucessfully
chown: failed to get attributes of `': No such file or directory
chmod: failed to get attributes of `': No such file or directory
.
k6:/home/stoffel# exit
exit
Script done on Fri May 14 20:48:13 2004
--
Dr.-Ing. C. Hurschler
Bodenstedtstr. 13
D-30173 Hannover
Reply to: