Installing problems

To: debian-user@lists.debian.org
Subject: Installing problems
From: Javier García <jgarcia1709@hotmail.com>
Date: Thu, 01 Apr 2004 22:41:01 +0200
Message-id: <[🔎] BAY12-F7eaDL8FubAnD000249e5@hotmail.com>

Hello, I've recently installed a Debian Linux(3.0 r1) distribution in my PC(AMD Athlon 1.7GHz, 256MB RAM) and I've found some problems, I'd thank youvery much if you could answer to my problems, here they are:I've managed to install succesfully the system base (kernel ... and it worksproperly(in console) so far), but I haven't been able to configure the X andthe mouse (which is USB device)


1º - Enclosed are some files you may need to know where the problems are:

(i've got a 15inch TFT SAMSUNG V[56-75],H[30-60] and a Riva TNTgraphics card)

2º - The Logitech mouse (USB): Is that a problem of the kernel, does itsupport USB devices like my USB modem DSL, as well?

3º - How could i install my DSL internet line with that modem(Sagem USB)?

Thank you very much.

_________________________________________________________________

Horóscopo, tarot, numerología... Escucha lo que te dicen los astros.http://astrocentro.msn.es/

Attachment: XFree86.0.log
Description: Binary data

### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#

# If you want your changes to this file preserved by dexconf, only makechanges

# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"pex5"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
	Load	"xie"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"es"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"PS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"Generic Mouse"
	Driver		"mouse"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"Generic Video Card"
	Driver		"vesa"
	Option		"UseFBDev"		"true"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	HorizSync	28-50
	VertRefresh	43-75
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Generic Video Card"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice	"Generic Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

### END DEBCONF SECTION

Section "ServerLayout"
	Identifier     "XFree86 Configured"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "pex5"
	Load  "record"
	Load  "xie"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option      "Protocol" "auto"
	Option      "Device" "/dev/mouse"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "SAM"
	ModelName    "SyncMaster"
	HorizSync    30.0 - 60.0
	VertRefresh  56.0 - 75.0
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "vesa"
	VendorName  "NVidia"
	BoardName   "Riva TNT"
	BusID       "PCI:1:0:0"
EndSection

Section "DRI"
	Group        0
EndSection

warning: process set to nice value 0 instead of -10 as requested

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Apr  1 03:22:07 2004
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "es"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.

(**) FontPath set to"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"

(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) NVidia Riva TNT rev 4, Mem @ 0xd4000000/24, 0xd6000000/24
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o
(II) Module vesa: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) VESA: driver for VESA chipsets: vesa
(--) Assigning device section with no busID to primary device
(--) Chipset vesa found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(**) VESA(0): Depth 24, (--) framebuffer bpp 24
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): Manufacturer: SAM  Model: 17  Serial#: 1195913525
(II) VESA(0): Year: 2002  Week: 17
(II) VESA(0): EDID Version: 1.3
(II) VESA(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) VESA(0): Sync:  Separate
(II) VESA(0): Max H-Image Size [cm]: horiz.: 30  vert.: 23
(II) VESA(0): Gamma: 2.78
(II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VESA(0): First detailed timing is preferred mode
(II) VESA(0): redX: 0.601 redY: 0.335   greenX: 0.304 greenY: 0.593
(II) VESA(0): blueX: 0.149 blueY: 0.106   whiteX: 0.295 whiteY: 0.310
(II) VESA(0): Supported VESA Video Modes:
(II) VESA(0): 720x400@70Hz
(II) VESA(0): 640x480@60Hz
(II) VESA(0): 640x480@72Hz
(II) VESA(0): 640x480@75Hz
(II) VESA(0): 800x600@56Hz
(II) VESA(0): 800x600@60Hz
(II) VESA(0): 800x600@72Hz
(II) VESA(0): 800x600@75Hz
(II) VESA(0): 1024x768@60Hz
(II) VESA(0): 1024x768@70Hz
(II) VESA(0): 1024x768@75Hz
(II) VESA(0): Manufacturer's mask: 0
(II) VESA(0): Supported Future Video Modes:
(II) VESA(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
(II) VESA(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
(II) VESA(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
(II) VESA(0): #3: hsize: 640  vsize 480  refresh: 60  vid: 16433
(II) VESA(0): Supported additional Video Mode:
(II) VESA(0): clock: 65.0 MHz   Image Size:  304 x 228 mm

(II) VESA(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344h_border: 0(II) VESA(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806v_border: 0(II) VESA(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 60 kHz,PixClock max 80 MHz

(II) VESA(0): Monitor name: SyncMaster
(II) VESA(0): Serial No: HJAT431711
(==) VESA(0): DPI set to (75, 75)
(EE) VESA(0): No matching modes
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.

Reply to:

Follow-Ups:
- Re: Installing problems
  - From: Andreas Janssen <andreas.janssen@bigfoot.com>
- Re: Installing problems
  - From: Paul Johnson <baloo@ursine.ca>

Prev by Date: Re: VoIP with Debian
Next by Date: Re: How do I install a BIN file?
Previous by thread: samba + win2k = oplock problem?
Next by thread: Re: Installing problems
Index(es):
- Date
- Thread