Re: Gnome on Debian-HPPA
>
> Hm? twm is available for hppa, and should be installable on stable.
> Where are you seeing this on the debian.org web site, and exactly what
> error message do you see?
>
Twm is dependent on menu (>1.5) and that's the packagae which is not
available in HPPA, sorry for the missing info.
Have a look for yourself:
http://packages.debian.org/cgi-bin/search_packages.pl?keywords=menu&searchon=names&subword=1&case=insensitive&version=stable&release=all
> You mean 'x-window-system-core' and 'x-window-system'. Certainly, you
> don't need x-window-system itself, if you want to install some different
> window manager.
>
So that means I need the core package but not the "real" package itself,
very well.
What else do I need?
gnome-core
gdm
x-windows-system-core
sawfish-gnome
is that it?
> Again, you're summarizing the error message. Could you quote it exactly?
> It makes it easier to search for it.
>
Of course........ first things first.
When I use apt-get install x-windows-system the system brings back
Sorry but the package has unmet dependencies.
x-window-system: Depends: twm but it is not going to be installed
E: Sorry broken packages
When I try to apt-get install twm the system brings back
twm: Depends: menu (>1.5) but it is not installable
E: Sorry broken packages
Well, seems like a "bug" in the dependencies, doesn't it?
>
> Perhaps you haven't installed a window manager. For GNOME in stable, try
> sawfish-gnome.
>
Colin, I'm quite fit but I never installed X myself, always with an
installer.
Could you please send me an emial, or give me a link with a Howto install
Gnome (and only gnome) onto my debian system?
That would be rather nice....... normally I just administrate server and I
avoid putting too much trash on the hdd, but this time I really need
graphics and tasksel won't do the job...... HEEEEEEEEEEELP :o)
Greets,
Jens
P.S.: I tried to fire up GNOME already but the server won't start up .
System says much :-) but I think the most important part is fatal server
error: no screens found. I've cp&pasted the logfile down below.......
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.20-64 parisc64 [ELF]
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Mar 27 15:01:48 2004
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr
/lib/X11/fonts/75dpi/:unscale
d,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100d
pi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(++) using VT number 7
(WW) Cannot open APM
(EE) No OS PCI support available
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(II) GLINT: driver for 3Dlabs chipsets: gamma, ti_pm2, ti_pm, pm3, pm2v,
pm2, pm, 300sx, 500tx, mx, delta
S3VIdentify
(II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326,
SIS300, SIS630, SIS540
(II) SAVAGE: driver (version 1.1.16) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister,
TwisterK
(II) TRIDENT: driver for Trident chipsets: tvga8900d, cyber9320, cyber9388,
cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4,
tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682,
providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d,
cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d,
cyberbladeAi1, cyberbladeAi1d, cyberbladeXP, cyberbladeXPm
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(II) FBDev: driver for framebuffer: fbdev, afb
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE (AGP)
(II) imstt: driver (version 1.0.0 for IMS TwinTurbo chipsets : imstt128,
imstt3d
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) v4l driver for Video4Linux
S3VProbe begin
(II) FBDev(0): using default device
(II) Running in FRAMEBUFFER Mode
(**) FBDev(0): Depth 24, (--) framebuffer bpp 32
(==) FBDev(0): RGB weight 888
(==) FBDev(0): Default visual is TrueColor
(==) FBDev(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDev(0): Hardware: (vidmem: 2048k)
(II) FBDev(0): Checking Modes against framebuffer device...
(II) FBDev(0): mode "1280x1024" ok
(II) FBDev(0): mode "1024x768" ok
(II) FBDev(0): mode "800x600" ok
(II) FBDev(0): Checking Modes against monitor...
(--) FBDev(0): Virtual size is 1280x1024 (pitch 1280)
(**) FBDev(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2
kHz, 56.2 Hz
(II) FBDev(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
+hsync +vsync
(==) FBDev(0): DPI set to (75, 75)
(**) FBDev(0): Using "Shadow Framebuffer"
(--) Depth 24 pixmap format is 32 bpp
Fatal server error:
AddScreen/ScreenInit failed for driver 0
Reply to: