On Sat, Nov 01, 2003 at 12:03:54PM +0100, Kurt Sys said > Hello, > > I have to install a new computer. I install Debian Woody (3.0r1) from boot-CD > (CD1 -- NON-US). Everything works fine except for one thing, I can't get my > ethernet card to work. I found on the net several people with similar or the > same problem, but I don't find an answer. So, here it is (again). > The network card is a D-link DFE-530tx. Following different sources, I need the > via-rhine module, but this won't work. Any other driver also doesn't work. > Below, I give some outputs which may be helpful. > > What should be my next step? > > tnx, > Kurt. > > > > ----- lspci -v ----- > [... cropped upper part ...] > > 00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24d5 (rev 02) > Subsystem: Intel Corp.: Unknown device e000 > Flags: bus master, medium devsel, latency 0, IRQ 3 > Memory at ffaff800 (32-bit, non-prefetchable) > Memory at ffaff400 (32-bit, non-prefetchable) > Capabilities: [50] Power Management version 2 > > 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro TF (prog-if > 00 [VGA]) > Subsystem: Unknown device 1787:0100 > Flags: bus master, stepping, 66Mhz, medium devsel, latency 32, IRQ 11 > Memory at f0000000 (32-bit, prefetchable) > I/O ports at a800 > Memory at ff8fc000 (32-bit, non-prefetchable) > Expansion ROM at ff8c0000 [disabled] > Capabilities: [50] AGP version 2.0 > Capabilities: [5c] Power Management version 2 > > 02:01.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3106 (rev 86) > Subsystem: D-Link System Inc: Unknown device 1403 > Flags: bus master, medium devsel, latency 32, IRQ 10 > I/O ports at b800 > Memory at ff9ffc00 (32-bit, non-prefetchable) > Expansion ROM at ff9e0000 [disabled] > Capabilities: [40] Power Management version 2 > ----- > > > > > ----- modprobe via-rhine ----- > /lib/modules/2.2.20-idepci/net/via-rhine.o: init_module: Device or resource busy > /lib/modules/2.2.20-idepci/net/via-rhine.o: insmod > /lib/modules/2.2.20-idepci/net/via-rhine.o failed > /lib/modules/2.2.20-idepci/net/via-rhine.o: insmod via-rhine failed > ----- This usually means the module is already loaded, or in the case of the Debian install kernels, that the module is built in. Have you checked "dmesg" to see if your card is already detected? -- Rob Weir <rweir@ertius.org> | mlspam@ertius.org | Do I look like I want a CC? Words of the day: enforcers lynch Axis Of Evil JUWTF FTS2000 ASDIC DES
Attachment:
signature.asc
Description: Digital signature