Configuring Shorewall

[David Baron <d_baron@012.net.il>]

I just intalled this.

I do not know what to do with it.

Here is an ifconfig
eth0      Link encap:Ethernet  HWaddr 00:50:BF:5A:A2:02
          inet addr:10.200.1.1  Bcast:10.200.1.254  Mask:255.0.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1535 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1497 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:339738 (331.7 KiB)  TX bytes:145129 (141.7 KiB)
          Interrupt:10 Base address:0xc000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:27 errors:0 dropped:0 overruns:0 frame:0
          TX packets:27 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1716 (1.6 KiB)  TX bytes:1716 (1.6 KiB)

ppp3      Link encap:Point-to-Point Protocol
          inet addr:80.178.82.15  P-t-P:212.199.28.249  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:5 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:112 (112.0 b)  TX bytes:217 (217.0 b)

Note: first time I ever saw the ppp3 item here--might be thefirewall. I have 
not seen this again. Connection was down at the time. I pon'ed and did this:

ifconfig ppp0
ppp0      Link encap:Point-to-Point Protocol
          POINTOPOINT NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:128 (128.0 b)  TX bytes:0 (0.0 b

My ADSL model is 10.0.0.138
Assigned IP is 10.200.1.1
submask assigned is 255.0.0.0
network got assigned 10.200.1.0
broadcast assigned 10.200.1.154
gateway 10.0.0.138