Re: WinTV driver docs?
have you tried accessing the device?
the dmesg seems ok....
it looks like for some reason modprobe trys to load tuner.o twice...
Albert
On Sun, 26 Oct 2003 11:03:46 -0500
stan <stanb@panix.com> wrote:
...
> And then I run into troubles :-(
>
> cogenvs:~# modprobe bttv
> Using /lib/modules/2.4.22/kernel/drivers/media/video/tuner.o
> insmod: a module named tuner already exists
> /lib/modules/2.4.22/kernel/drivers/media/video/bttv.o: post-install
> bttv failed/lib/modules/2.4.22/kernel/drivers/media/video/bttv.o:
> insmod bttv failed cogenvs:~# exit
>
> Script done on Sun Oct 26 10:43:48 2003
>
> dmesg after this:
>
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
> i2c-core.o: i2c core module
> i2c-algo-bit.o: i2c bit algorithm module
> bttv: driver version 0.7.107 loaded
> bttv: using 4 buffers with 2080k (8320k total) for capture
> bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
> bridge bttv: Host bridge needs ETBF enabled.
> bttv: Bt8xx card found (0).
> PCI: Found IRQ 9 for device 00:0d.0
> PCI: Sharing IRQ 9 with 00:0d.1
> bttv0: Bt878 (rev 2) at 00:0d.0, irq: 9, latency: 64, mmio: 0xfeddf000
> bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is
> 0070:13eb bttv0: using: BT878(Hauppauge (bt878))
> [card=10,autodetected] bttv0: enabling ETBF (430FX/VP3 compatibilty)
> bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
> i2c-core.o: adapter bt848 #0 registered as adapter 0.
> bttv0: Hauppauge eeprom: model=61001, tuner=Philips FI1236 MK2 (2),
> radio=no
> bttv0: using tuner=2
> bttv0: i2c: checking for MSP34xx @ 0x80... not found
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tvaudio: TV audio decoder + audio/video mux driver
> tvaudio: known chips:
> tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea642
> 0,tda8425,pic16c54 (PV951),ta8874z
> i2c-core.o: driver generic i2c audio driver registered.
> i2c-core.o: driver i2c TV tuner driver registered.
> tuner: chip found @ 0xc2
> tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
> i2c-core.o: client [Philips NTSC (FI1236,FM1236 and] registered to
> adapter[bt84
> 8 #0](pos. 0).
> bttv0: PLL: 28636363 => 35468950 .. ok
> bttv0: registered device video0
> bttv0: registered device vbi0
>
> And an lsmod:
>
> Module Size Used by Not tainted
> tuner 10888 1 (autoclean)
> tvaudio 14408 0 (autoclean) (unused)
> bttv 97376 0 (unused)
> i2c-algo-bit 7560 1 [bttv]
> i2c-core 13892 0 [tuner tvaudio bttv i2c-algo-bit]
> apm 10600 0 (autoclean)
> soundcore 4292 0 (autoclean) [bttv]
> ide-scsi 10448 0
> agpgart 36608 0 (unused)
> parport_pc 13732 1 (autoclean)
> lp 6656 0 (autoclean)
> parport 16096 1 (autoclean) [parport_pc lp]
> keybdev 2116 0 (unused)
> usbkbd 3676 0 (unused)
> input 3744 0 [keybdev usbkbd]
> usb-uhci 24592 0 (unused)
> usbcore 65228 0 [usbkbd usb-uhci]
>
> What am I doing wrong?
>
> --
> "They that would give up essential liberty for temporary safety
> deserve neither liberty nor safety."
> -- Benjamin Franklin
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
--
Albert Dengg <a_d@gmx.at>
Reply to: