[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: pcmcia & K 2.6.0-test2 wireless MA401



it works with the oronico_cs driver.  
I had to modprobe oronico_cs.


Just for information, oronico_cs assigns eth1 for this card. Is it possible to change this device to wlan0 like hostap_cs driver ? 

I prefer wlan because it informs about the type of device used (wireless/ethernet..) And, because I use pcmcia cards, if I add an ethernet card before my wireless one, the ethernet will take eth1 device and I'll have to modify my /etc/network/interfaces. If the driver assigned wlanxx, I wouldn't have this conflict.


	Thanks In Advance

		François 
       

On Wed, 6 Aug 2003 18:33:17 +0200
François Chenais <francois@chenais.net> wrote:

> Hello, 
> 
> Is somebody has installed a NetGear MA401 pcmcia wireless card under linux kernel 2.6.0-test2 ??
> 
> The diver used under 2.4.20 is hostap_cs. I don't find it in 2.6.0 kernel modules.
> 
> Do I have to rebuild it ?
> Do I have to rebuild pcmcia-cs package ?
> 
> I can't find how to make my pcmcia modem card works too.
> 
> 	
> 
> 	Thanks a lot
> 
> 		François
> 
> -- 
> Debian SID
> Linux tanna 2.6.0-test2 #10 Tue Aug 5 13:36:17 CEST 2003 i686 GNU/Linux
> Linux Counter #59413
> PGP fingerprint : 9AFA 15EC 96C9 F607 EBC1  DD41 70C5 F0E0 25A5 105B
> 


-- 
Debian SID
Linux tanna 2.6.0-test2 #10 Tue Aug 5 13:36:17 CEST 2003 i686 GNU/Linux
Linux Counter #59413
PGP fingerprint : 9AFA 15EC 96C9 F607 EBC1  DD41 70C5 F0E0 25A5 105B

Attachment: pgpUBqSdvTvCn.pgp
Description: PGP signature


Reply to: