AW: pppd problem...
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
184.108.40.206 * 255.255.255.255 UH 0 0 0 ppp0
192.168.0.2 * 255.255.255.255 UH 1 0 0 tap0
default * 0.0.0.0 U 1 0 0 tap0
My isp requires the email address as the login name. That works under
In pppconfig I set it to dynamically set the DNS server which I guess it's
doing because I'm getting the lines
Mar 1 18:58:38 k6 pppd: primary DNS address 220.127.116.11
Mar 1 18:58:38 k6 pppd: secondary DNS address 18.104.22.168
in my script. Or am I mistaken here?
Dr.-Ing. Christof Hurschler
> -----Ursprungliche Nachricht-----
> Von: Donald Spoon [mailto:email@example.com]
> Gesendet: Samstag, 1. Marz 2003 20:45
> An: firstname.lastname@example.org
> Betreff: Re: pppd problem...
> Christof Hurschler wrote:
> > Hi, I've tried, but can't seem to figure out how to get
> this working. Yes,
> > I'm a newbie.
> > I'm running Woody, and made the following config file with pppconfig
> > # This optionfile was generated by pppconfig 2.0.10.
> > #
> > #
> > hide-password
> > noauth
> > connect "/usr/sbin/chat -v -f /etc/chatscripts/debitel.net"
> > debug
> > /dev/ttySL0
> > 115200
> > defaultroute
> > noipdefault
> > user email@example.com
> Rerun pppconfig and make the above line read:
> user "hurschler"
> All you have to do is enter your ISP "username" when asked, not your
> E-Mail address as you did.
> > remotename debitel.net
> > ipparam debitel.net
> > usepeerdns
> It looks like your modem is working OK and getting the necessary info
> from your ISP (IP, DNS, etc). I suspect that the error noted
> above is
> resulting in you not automatically logging in to your account at your
> ISP, via PAP. If you just put in your login name (username) that you
> use when you are asked by pppconfig and your password, then PAP will
> automatically log you in. Do select PAP authentication.
> Also you can
> check the current status of your "username" and "password" by
> looking in
> the /etc/ppp/pap-secrets file near the bottom. I suspect it
> will have
> your E-Mail address listed in the first column... this should be your
> username enclosed is quotes. Re-running pppconfig with the
> correct info
> should clear this up.
> Normally, not being able to contact various hosts around the internet
> with lynx or konqueror indicates a DNS problem. You can usually tell
> this if you can "ping" hosts by IP number but not by name. I really
> don't think this is your problem here, but if you continue to have
> problems after making the above suggested changes, come on
> back with the
> results of a "route" and "ifconfig" command after you have
> the connection.
> Is the connection terminating by itself or did you terminate
> it in the
> above log extract? If it is terminating itself, then it
> would add more
> support to you not really getting logged in, IMHO.
> -Don Spoon-
> To UNSUBSCRIBE, email to firstname.lastname@example.org
> with a subject of "unsubscribe". Trouble? Contact