cca2wav screws up first tract

[joe mc cool <joe@benburb.demon.co.uk>]

Debian 2.2.20, all scsi cdroms:

copying CDs command line:

	# cdda2wav -v255 -D0,5,0 -B -Owav -x 2&1> joe.tem

Error messages:

============================================================================
.....
....
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 300s
 1/ 1/ 1/ 174048   0%solaris:/tmp# cdda2wav: Input/output error. Read10 
NEC: scsi sendcmd: no error
CDB:  D4 00 00 00 2A 34 00 00 4B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x00 (logical unit not ready, cause not Sense 
flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 300s
 1/ 1/ 1/ 174048   0%solaris:/tmp# cdda2wav: Input/output error. Read10 
NEC: scsi sendcmd: no error
CDB:  D4 00 00 00 2A 34 00 00 4B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x00 (logical unit not ready, cause not 
reportable) Fru 0x0
...................
============================================================================

It only reports this on track 1 all the other tracks are OK.  The 
resulting track_01.wav is unreadable.

Stuck.

--
Joe Mc Cool
========================================================================
Tangent Computer Research BT71 7LN (www.tangent-research.com)
voice:(44)2837-548074fax:(44)-870-0520185 The more you say the less the 
better.