apcupsd 3.8.5 with Debian & Back-UPS CS 350
Hello,
I did apt-get install apcupsd on my Debian Woody box
and made appropriate changes to the apcupsd.conf file.
The program starts fine, I see apcmain, apcnis, apcser
running, and I can do apcaccess status so I am communicating
with the UPS. But when I unplug power .... NO warning messages are
displayed on my desktop and there are no messages in either
/var/log/messages or /var/log/apcupsd.events.
I have the proper cable shipped directly from APC (940-0128A)
What am I doing wrong?
## apcupsd.conf v1.1 ##
UPSCABLE 940-0128A
UPSTYPE backups
DEVICE /dev/ttyS0
LOCKFILE /var/lock
MINUTES 3
TIMEOUT 0
ANNOY 300
ANNOYDELAY 5
NOLOGON disable
KILLDELAY 0
NETSERVER on
NISPORT 6543
EVENTSFILE /var/log/apcupsd.events
STATTIME 0
STATFILE /var/log/apcupsd.status
LOGSTATS off
DATATIME 0
UPSNAME UPS_IDEN
UPSCLASS standalone
UPSMODE disable
NETACCESS true
steelhead:/etc/apcupsd# apcaccess status
DATE : Sun Dec 15 11:30:24 AKST 2002
HOSTNAME : steelhead
RELEASE : 3.8.5
UPSNAME : UPS_IDEN
CABLE : APC Cable 940-0128A
MODEL : BackUPS
UPSMODE : Stand Alone
STARTTIME: Sun Dec 15 11:12:35 AKST 2002
LINEFAIL : OK
BATTSTAT : OK
STATFLAG : 0x008 Status Flag
END APC : Sun Dec 15 11:30:24 AKST 2002
steelhead:/etc/apcupsd#
Reply to: