Uppdating kernel issue
Hello
I'm having problem updating the kernel after an installation of woody.
I dont know what caused it so i paste the diffrent bootup messages.
---/snip bf2.4 boot messages
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1440-0x1447, BIOS settings: hda:pio, hdb:DMA
hda: SunDisk SDTB-128, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 31360 sectors (16 MB) w/1KiB Cache, CHS=490/2/32 ide-floppy driver
0.97.sv Partition check:
hda:
Floppy drive(s): fd0 is 1.44M
PCI: Enabling device 00:11.0 (0000 -> 0003)
PCI: Found IRQ 5 for device 00:11.0
PCI: Sharing IRQ 5 with 01:00.0
cpqarray: Sorry, I don't know how to access the SMART Array controller
00000000
PCI: Found IRQ 5 for device 00:11.0
PCI: Sharing IRQ 5 with 01:00.0
---------the last 6 lines loops 4 ever---
-------standard kernel from boot floppy -- ---
Loading Linux..................Linux version 2.2.20 (herbert@gondolin)
(gcc version 2.7.2.3) #1 Sat Apr 20 11:45:28 EST 2002
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1440-0x1447, BIOS settings: hda:pio, hdb:DMA
hda: SunDisk SDTB-128, ATA DISK drive
hdb: IBM-DBCA-206480, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: SunDisk SDTB-128, 15MB w/1kB Cache, CHS=490/2/32
hdb: IBM-DBCA-206480, 6194MB w/420kB Cache, CHS=789/255/63 Floppy
drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Partition check:
hda:
hdb: hdb1 hdb2
------- i need some of the featurs in 2.4.x but as you can see the bf2.4
does not find hdb...
Lasse
--------------------------------------------
Light thinks it travels faster than anything but it's wrong. No matter
how fast light travels it finds the darkness has always got there first,
and is waiting for it.
Reply to: