Re: DEC tulip ethernet driver problem
Hello,
It seems to me like de4x5 driver problem. I suggest You excluding it
from the kernel. Tulip driver works fine here.
Best regards.
Dmitry
>I have a DEC Tulip card and wish to support it under a 2.4.19 kernel.
>It looks like the kernel driver support for the cards has changed.
>I'd be grateful for any advice on how to sort this out.
>
>Thanks
>Rory
>
>
>2.2.20 kernel configuration:
>
>CONFIG_PCI_OLD_PROC=y
>CONFIG_NET_ETHERNET=y
>CONFIG_NET_ISA=y
>CONFIG_EWRK3=y
>CONFIG_EEXPRESS=y
>CONFIG_EEXPRESS_PRO=y
>CONFIG_NET_EISA=y
>CONFIG_DE4X5=y
>CONFIG_DEC_ELCP=y
>CONFIG_DGRS=y
>CONFIG_EEXPRESS_PRO100=y
>
>2.2.20 dmesg output:
>
>tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov
>eth0: Digital DS21143 Tulip rev 65 at 0x7800, 00:00:C5:53:29:AE, IRQ 9.
>eth0: EEPROM default media type Autosense.
>eth0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
>eth0: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY (2) block.
>eth0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
>eth0: Index #3 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY (4) block.
>eth0: Index #4 - Media 100baseTx (#3) described by a 21143 reset method (5) block.
>eth1: Digital DS21143 Tulip rev 48 at 0x7880, 00:00:F8:7A:9A:D9, IRQ 5.
>eth1: EEPROM default media type Autosense.
>eth1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
>eth1: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY (2) block.
>eth1: Index #2 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block.
>eth1: Index #3 - Media AUI (#2) described by a 21142 Serial PHY (2) block.
>eth1: Index #4 - Media MII (#11) described by a 21142 MII PHY (3) block.
>eth1: ***WARNING***: No MII transceiver found!
>eth2: region already allocated at 0x7800.
>eth2: region already allocated at 0x7880.
>
>2.4.19 kernel configuration:
>
>CONFIG_NET_ETHERNET=y
>CONFIG_DEPCA=y
>CONFIG_NET_ISA=y
>CONFIG_EWRK3=y
>CONFIG_EEXPRESS=y
>CONFIG_EEXPRESS_PRO=y
>CONFIG_NET_PCI=y
>CONFIG_TULIP=y
># CONFIG_TC35815 is not set
># CONFIG_TULIP_MWI is not set
># CONFIG_TULIP_MMIO is not set
>CONFIG_DE4X5=y
>CONFIG_EEPRO100=y
>CONFIG_8139TOO=y
>
>2.4.19 dmesg output:
>
>eth0: DC21143 at 0x7800 (PCI bus 1, device 9), h/w address 00:00:c5:53:29:ae,
> and requires IRQ9 (provided by PCI BIOS).
>de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com
>eth1: DC21143 at 0x7880 (PCI bus 1, device 13), h/w address 00:00:f8:7a:9a:d9,
> and requires IRQ5 (provided by PCI BIOS).
>de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com
>Linux Tulip driver version 0.9.15-pre11 (May 11, 2002)
>PCI: Unable to reserve I/O region #1:80@7800 for device 01:09.0
>Trying to free nonexistent resource <f7fff800-f7fffbff>
>PCI: Unable to reserve I/O region #1:80@7880 for device 01:0d.0
>Trying to free nonexistent resource <f7fff400-f7fff47f>
>
>
>--
>Rory Campbell-Lange
><rory@campbell-lange.net>
><www.campbell-lange.net>
>
>
>--
>To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
>with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: