[Question] odd Freeswan ...
Hello List :
I am newbie in Freeswan
when i type "ipsec look" i got some message as following :
shell> ipsec look
==========================================
ove Thu Aug 8 11:49:28 CST 2002
192.168.8.0/24 -> 192.168.8.0/24 => tun0x1002@203.204.146.166 esp0x2bd8de0b@203.204.146.166 (0)
ipsec0->ppp0 mtu=16260(1492)->1492
esp0x2bd8de0b@203.204.146.166 ESP_3DES_HMAC_MD5: dir=out src=61.228.14.122 iv_bits=64bits iv=0x665d8b7be3f081b3 ooowin=64 alen=128 aklen=128 eklen=192 life(c,s,h)=addtime(71905,0,0)
esp0x42b345dd@61.228.14.122 ESP_3DES_HMAC_MD5: dir=in src=203.204.146.166 iv_bits=64bits iv=0xc13e85831597c828 ooowin=64 alen=128 aklen=128 eklen=192 life(c,s,h)=addtime(71905,0,0)
tun0x1001@61.228.14.122 IPIP: dir=in src=203.204.146.166 policy=192.168.8.0/24->192.168.8.0/24 flags=0x8<> life(c,s,h)=addtime(71905,0,0)
tun0x1002@203.204.146.166 IPIP: dir=out src=61.228.14.122 life(c,s,h)=addtime(71905,0,0)
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 61.231.216.254 0.0.0.0 UG 40 0 0 ppp0
192.168.8.0 61.231.216.254 255.255.255.0 UG 40 0 0 ipsec0
61.231.216.254 0.0.0.0 255.255.255.255 UH 40 0 0 ipsec0
61.231.216.254 0.0.0.0 255.255.255.255 UH 40 0 0 ppp0
==========================================
ipsec seems working between 203.204.146.166 and 61.228.14.122.........
BUT i got a odd message when i type "ipsec whack --status" !
shell> ipsec whack --status
030 truncated message from whack: got 402 bytes; expected 2476. Message ignored.
is it a error message???? but i dont see any error log in /var/log/syslog....
Anyone got ideas as to the nature/solution of this problem?
--
Trust & Unique ...
Axacheng's PGP Public Key http://www.navigation.idv.tw/pgpkey
Reply to: