Aviplay question
Hello.
I am havihng trouble trying to play an DivX movie.
I usually play movies using aviplay, and it used to work.
But it failed this time... there is no sound. The complete aviplay output
is below.
I see the error messages, but they are too cryptic for me ...
Seems that this is the reason:
...
AC3 pass-through audio decoder created
src [wFormatTag=0x2000, nChannels=3, nSamplesPerSec=48000,
nAvgBytesPerSec=16000, nBlockAlign=1, wBitsPerSample=0, cbSize=18]
dst [wFormatTag=0x2000, nChannels=3, nSamplesPerSec=32000,
nAvgBytesPerSec=192000, nBlockAlign=6144, wBitsPerSample=16, cbSize=18]
SdlAudioRenderer: FATAL: Couldn't open audio device: 1 (mono) and 2
(stereo) channels supported
...
Does it mean that I can't play this file on using my current hardware
(soundcard is a cheap CM8x38-based)?
Or I just missed something?
Thank you on your help
nikita@sercond:/cdrom/VIDEO_TS> aviplay VTS_01_1.vob
fs seg 0x40016000
Available CPU flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 mmx fxsr sse
637.503000 MHz Celeron (Coppermine) processor detected
MainAVIHeader: MicroSecPerFrame=41708 MaxBytesPerSec=0
PaddingGranularity=0 Flags=[ HAS_INDEX IS_INTERLEAVED ] TotalFrames=126571
InitialFrames=0 Streams=2 SuggestedBufferSize=0 WxH=512x384
AVIStreamHeader: FccType=vids FccHandler=div3 Flags=[ ]
InitialFrames=0 Scale=1000 Rate=23976 Start=0 Length=126571
SuggestedBufferSize=70986 Quality=10000 SampleSize=0 Rect
l,r,t,b=0,512,0,384
AVIStreamHeader: FccType=auds FccHandler=0x0 Flags=[ ]
InitialFrames=1 Scale=1 Rate=16000 Start=0 Length=84450304
SuggestedBufferSize=2656 Quality=-1 SampleSize=1 Rect
l,r,t,b=28508,12336,0,6393
InfoChunk Software: Nandub v1.0rc2
Stream 0: 0x73646976 (vids) : 0x33766964 (div3) 126571 chunks (1977.67KB)
Cache: Adding stream 0, 126571 chunks
Stream 1: 0x73647561 (auds) : 0x0 (unknown?) 31797 chunks (496.83KB)
Cache: Adding stream 1, 31797 chunks
Cache: Creating cache for file descriptor: 7
Initialized stream 0 (Chunk table size 126571, format size 40)
Initialized stream 0 (Chunk table size 84450304, format size 18)
Successfully opened VTS_01_1.vob
/usr/lib/avifile0.6/libwin32.so: found A: 13 V: 46 plugins
/usr/lib/avifile0.6/libvorbis_audio.so: found A: 1 V: 0 plugin
/usr/lib/avifile0.6/libmpeg_audiodec.so: found A: 1 V: 0 plugin
/usr/lib/avifile0.6/libmp3lamebin_audioenc.so: found A: 1 V: 0 plugin
/usr/lib/avifile0.6/libmjpeg.so: found A: 0 V: 1 plugin
/usr/lib/avifile0.6/libmad_audiodec.so: found A: 1 V: 0 plugin
/usr/lib/avifile0.6/libffmpeg.so: found A: 1 V: 5 plugins
/usr/lib/avifile0.6/libdivx4.so: found A: 0 V: 2 plugins
/usr/lib/avifile0.6/libaudiodec.so: found A: 5 V: 0 plugins
/usr/lib/avifile0.6/libac3pass.so: found A: 1 V: 0 plugin
Using DirectShow codec: divx_c32.ax
Decoder is capable of YUV output ( flags 0x9 )
DivX ;-) DirectShow video decoder created
Trying audio renderers: SDL,OSS,noaudio
Audio in AC3 DVM format
AC3 pass-through audio decoder created
src [wFormatTag=0x2000, nChannels=3, nSamplesPerSec=48000,
nAvgBytesPerSec=16000, nBlockAlign=1, wBitsPerSample=0, cbSize=18]
dst [wFormatTag=0x2000, nChannels=3, nSamplesPerSec=32000,
nAvgBytesPerSec=192000, nBlockAlign=6144, wBitsPerSample=16, cbSize=18]
SdlAudioRenderer: FATAL: Couldn't open audio device: 1 (mono) and 2
(stereo) channels supported
Trying audio renderers: OSS,noaudio
Audio in AC3 DVM format
AC3 pass-through audio decoder created
src [wFormatTag=0x2000, nChannels=3, nSamplesPerSec=48000,
nAvgBytesPerSec=16000, nBlockAlign=1, wBitsPerSample=0, cbSize=18]
dst [wFormatTag=0x2000, nChannels=3, nSamplesPerSec=32000,
nAvgBytesPerSec=192000, nBlockAlign=6144, wBitsPerSample=16, cbSize=18]
OssAudioRenderer: FATAL: AC3 SNDCTL_DSP_SETFMT failed
** Have you set emu10k1 into proper state?? (see README) **
Trying audio renderers: noaudio
Reply to: