[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: 3c905c arp/configuration problems



On Mon, Jan 14, 2002 at 10:54:38PM -0500, Angus D Madden wrote:
> The client box also has a 3c905C. It was initially running WindowsME
> with dhcp used to configure the network interface.  Everything was
> working fine, network wise.
> 
> Repeated problems with the Widnows and an eventual disk failure have
> prompted me to install Debian on the client box.
> 
> I could not get the network interface to function after I
> installed Debian (from potato rev 2 install disks 2.2.17 kernel).  
> The 3x59x module inserts cleanly, I can bring the interface up, but I 
> can't get anywhere on the network.

The 3c905c is not supported by the kernel available on the 2.2r2
install disks.  You need a newer set of install disks, or a newer
kernel.

If I were you I'd compile a kernel on your other box and transfer it
over via sneakernet :)

-- 
Nathan Norman - Staff Engineer | A good plan today is better
Micromuse Ltd.                 | than a perfect plan tomorrow.
mailto:nnorman@micromuse.com   |   -- Patton

Attachment: pgp9bMJgziCVU.pgp
Description: PGP signature


Reply to: