X not working after upgrade
Hi,
Currently I am tracking woody daily. After yesterday's upgrade, my X no
longer works. When I type starts, it just aborts. It mentions something
about the module mga_drv.o. I tried recreating the XF86Config-4 file,
but to no avail. Has anybody faced a similar problem?
I have quoted part of the output below:
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: xx August 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.13 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Jan 8 06:20:42 2002
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Samtron 55E"
(**) | |-->Device "Matrox G200"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 4
(**) MGA(0): Depth 24, (--) framebuffer bpp 32
(==) MGA(0): RGB weight 888
(II) Loading /usr/X11R6/lib/modules/drivers/mga_hal_drv.o
(II) Module mga_hal: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) MGA(0): Matrox HAL module used
(--) MGA(0): Chipset: "mgag200"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xE0000000
(--) MGA(0): MMIO registers at 0xDC000000
(--) MGA(0): Pseudo-DMA transfer window at 0xDD000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07CE0
(--) MGA(0): Found and verified enhanced Video BIOS info block
(**) MGA(0): VideoRAM: 8192 kByte
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.2.0
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info
(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 250 MHz
(II) MGA(0): Samtron 55E: Using hsync range of 31.50-57.00 kHz
(II) MGA(0): Samtron 55E: Using vrefresh range of 50.00-100.00 Hz
(II) MGA(0): Clock range: 12.00 to 250.00 MHz
....
Symbol XAA_888_plus_PICT_a8_to_8888 from module /usr/X11R6/lib/modules/drivers/mga_drv.o is unresolved!
Symbol fbPictureInit from module /usr/X11R6/lib/modules/drivers/mga_drv.o is unresolved!
Fatal server error:
Caught signal 11. Server aborting
--
Sridhar M.A. mas@uomphysics.net
Whenever I hear anyone arguing for slavery, I feel a strong impulse to
see it tried on him personally.
-- Abraham Lincoln
Reply to: