[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: cdrecord problems



log with -vv is attached

On Sun, 6 Jan 2002, martin f krafft wrote:

> also sprach Russ Cook <russcook@flash.net> [2002.01.06.2335 +0100]:
> > Now I get errors when trying to burn CDs.  I have attached a log
> > file.  Can anyone help?
>
> give the output of the same operation with the -vv option to cdrecord.
>
> --
> martin;              (greetings from the heart of the sun.)
>   \____ echo mailto: !#^."<*>"|tr "<*> mailto:"; net@madduck
>
> an avocado-tone refrigerator would look good on your resume.
>
Cdrecord 1.10 (i586-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.5'
atapi: 0
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : SYNC 
Vendor_info    : 'YAMAHA  '
Identifikation : 'CRW4416S        '
Revision       : '1.0g'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1566432 = 1529 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  562 MB        
track: 1 start: 0 pregap: 150
Total size:     645 MB (63:58.53) = 287890 sectors
Lout start:     646 MB (64:00/40) = 287890 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 6
  Reference speed: 2
  Is not unrestricted
  Is erasable
  ATIP start of lead in:  -11078 (97:34/22)
  ATIP start of lead out: 336075 (74:43/00)
  speed low: 0 speed high: 4
  power mult factor: 3 5
  recommended erase/write power: 3
  A2 values: 5C C6 26
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 48185
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 9 seconds.8 seconds.7 seconds.6 seconds.5 seconds.4 seconds.3 seconds.2 seconds.1 seconds.0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0

Track 01:   0 of 562 MB written.
write track data: error after 0 bytes
Writing  time:   67.617s
Fixating...
Fixating time:    0.005s

Reply to: