[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: ADAPTEC 2040U2W PROBLEM



----- Original Message ----- 
From: "Paul Mackinney" <paul@mackinney.net>
To: <debian-user@lists.debian.org>
Sent: Tuesday, January 01, 2002 10:37 PM
Subject: Re: ADAPTEC 2040U2W PROBLEM


> nate muttered:
> > <quote who="JM Vainio">
> > > Hello!
> > 
> > > scsi bus is being reset for host 0 channel 0.
> > > scsi host 0 channel 0 reset (pid17) timed out - trying harder
> > > scsi bus is being reset for host 0 channel 0.
> > > scsi host 0 abort (pid17) timed out - resetting
> > > scsi bus is being reset for host 0 channel 0.
> > > (scsi0:0:0:0) device reset, message buffer in use
> > > Is anyone here familiar with this kind of issues?
> > yep i had that occur on my 2 intel ISP2150 servers.
> > the workaround is to tell the driver not to reset
> > the card, its a kernel option you type when you
> > boot the system at the boot: prompt. navigate through
> > the help screens and it will be there, its something
> > like
> > 
> > aic78xxx=no_reset
> > 
> If your card is like mine, there are some options you can configure at
> boot by typing Ctrl-A, one of them has something to do with allowing 
> resets.
> 
> HTH, Paul


Well, please inform me which option you mean. I think I have tried quite many of them...:-) But if you know the one, it might help.

And the card is Adaptec 2940u2w.



Reagards:

Janne M. Vainio, Helsinki, Finland



Reply to: