no eth0?
debs,
eth0 is found at boot:
# dmesg
[snip
3c59x.c:v0.99H 27May00 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905C Tornado at 0x1400,
00:01:03:1a:41:3f, IRQ 11 8K byte-wide RAM 5:3 Rx:Tx
split, autoselect/Autonegotiate interface. MII
transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
Sending DHCP and RARP requests ... timed out!
IP-Config: Reopening network devices... Sending DHCP
and RARP requests ..<7>eth0: Transmit error, Tx status
register 82. . timed out! IP-Config: Reopening network
devices... Sending DHCP and RARP requests ..<7>eth0:
Transmit error, Tx status register 82. . timed out!
[snip]
but eth0 disappears...
# ifconfig
/dev/eth0 /dev/eth0: error fetching interface
information: Device not found
...suggestions for a successful ifconfig?
ia, t.
bentley taylor.
//
Reply to: