[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Failed reboot after upgrade



On Thu, Aug 10, 2000 at 12:37:05AM -0400, charles kaufman wrote:
> Hi
> I have just upgraded from 2.1 to frozen. I had some difficulty with
> apt but the list helped me past it and all seemed well. 
> 
> So I tried to reboot but the reboot failed.
> Some of the messages at reboot were about looking for a cdrom-
> one brand after another, at 0x340 or 0x280 or 0x638 and on and on;
> others were about attempts to load modules 
> and others about kernel mismatches. It finally hung.
> 
> I pushed reset and choose a different kernel at the lilo prompt
> and that did boot but only after many 'unable to handle kernel
> paging request' messages during 'process modpobe.'
> 
> The kernel that worked is 2.0.36; the one I normally use is 2.0.34 and
> that is what was running when I upgraded.
> 
> I did not change anything, that I know of, that had to do with modules.
> The release notes say if upgrading from Debian 2.0 or earlier that
> 'update-modules force' should be run, but since I had 2.1 I did not
> do that. 
> 
> I do have the script record of the upgrade.

More helpful would be 'dmesg' output.  Followup posting this to the
list.

Have you run or re-run "lilo", with an appropirate /etc/lilo.conf file?

-- 
Karsten M. Self <kmself@ix.netcom.com>     http://www.netcom.com/~kmself
 Evangelist, Opensales, Inc.                    http://www.opensales.org
  What part of "Gestalt" don't you understand?   Debian GNU/Linux rocks!
   http://gestalt-system.sourceforge.net/    K5: http://www.kuro5hin.org
GPG fingerprint: F932 8B25 5FDD 2528 D595 DC61 3847 889F 55F2 B9B0

Attachment: pgprrLqk8nGIP.pgp
Description: PGP signature


Reply to: