BIOS and hardware configuration for GA-5AX Gigabyte mainboard
Hi, all!
Is anyone out there who owns a GA-5AX (rev 5.x) gigabyte mainboard? I
would like to know the best BIOS and hardware configuration for my
system. Now I cannot compile linux kernel because of signal 11 raises
(Segmentation fault). I've read the Signal 11 FAQ
(http://www.BitWizard.nl/sig11/) and I need some help.
The system characteristics follow:
CPU: AMD-K6-2/450 (2.4 V) (dmesg says "AMD-K6(tm) 3D processor stepping
0c")
SPEED: 100MHz (external) x4.5=450MHz (internal)
DRAM: 1 DIMM of 128Mb (10 ns, I think) (How can I know it?)
CACHE: How can I know it? (dmesg says "L1 I Cache: 32K L1 D Cache:
32K")
I/O BUS SLOTS:
video: PCI card: CL543xPCI SMT, chip: CL-GD5440-J-QC-B
sound: ISA card: SB16, sb io=0x220 irq=5 dma=1 dma16=5 mrq_io=0x330
opl3 io=0x388
+CD-ROM sbpcd sbpcd=0x230,1
net: ISA card: Ethernic 2000 (ne2000), ne io=0x300 irq=10
IDE PORTS:
hda: QUANTUM FIREBALL1280A, ATA DISK drive
hdb: QUANTUM FIREBALL ST6.4A, ATA DISK drive
hdc: YAMAHA CRW8424E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
I/O PORTS:
mouse: ttyS00 at 0x03f8 (irq = 4) is a 16550A
keyboard: PS/2
BIOS: AWARD (c) 1998 PCI/PNP 586 214082403
Kernel compilation is not the only sympthom: sometimes the X11 server
caughts signal 11 and exists, which is VERY annoying (good spelling?).
Thanks in advance!
--
Conrado Badenas <Conrado.Badenas@uv.es>
PhD student | Assistant Lecturer
Department of Thermodynamics | Department of Optics
---------------------------------------------------
Faculty of Physics. University of Valencia
c/. Dr. Moliner, 50
46100 Burjassot (Valencia) - SPAIN
Reply to: