Re: XFree86 server for ATI Rage 128 Pro
Thanks but the card is a Rage Fury Pro, not a Rage Fury. There is a
different chipset and the usual Rage128 drivers which are in the SVGA
server of 3.3.6 do not seem to work with this set.
Carlo
On Wed, 12 Jul 2000, thomas huber wrote:
>on suse6.3 you found a special file for this
>or take it from server
>read
>sdb.suse.de/sdb/de/html/cg_rage128_63.html
>
>vale
>
>On Mit, 12 Jul 2000, Carlo U. Segre wrote:
>> Hello All:
>>
>> Has anyone found a working driver for an ATI Rage 128 Pro AGP card?
>> I have tried the SVGA and it does not recognize the card, but tries to
>> operate it and I get a blank display which can be terminated with
>> Ctl-Alt-Backspace. A dump of the xserver's output is below as is the
>> /proc/pci dump for this device. I am using version 3.3.6 of XFree86.
>>
>> Any help would be appreciated.
>>
>> Carlo
>>
>>
>> ----- xserver_SVGA output -----
>>
>> XFree86 Version 3.3.6 / X Window System
>> (protocol Version 11, revision 0, vendor release 6300)
>> Release Date: January 8 2000
>> If the server is older than 6-12 months, or if your card is newer
>> than the above date, look for a newer version before reporting
>> problems. (see http://www.XFree86.Org/FAQ)
>> Operating System: Linux 2.2.14 i586 [ELF]
>> Configured drivers:
>> SVGA: server for SVGA graphics adaptors (Patchlevel 1):
>> .
>> --- snip --
>> .
>> ((--) SVGA: PCI: ATI Rage 128 PF rev 0, Memory @ 0xe0000000, MMIO @ 0xefefc000, I/O @ 0xac00
>> Using XFree86 ATI driver version 4.7.
>> Unknown graphics controller detected.
>> Unknown chip descriptor in BIOS: 0x3F3F0000.
>> Unknown video adapter detected.
>> Brooktree 476 or similar RAMDAC detected.
>> Support for this video adapter is highly experimental!
>>
>> ----- /proc/pci dump -----
>>
>> Bus 1, device 0, function 0:
>> VGA compatible controller: ATI Unknown device (rev 0).
>> Vendor id=1002. Device id=5046.
>> Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. Latency=64. Min Gnt=8.
>> Prefetchable 32 bit memory at 0xe0000000 [0xe0000008].
>> I/O at 0xac00 [0xac01].
>> Non-prefetchable 32 bit memory at 0xefefc000 [0xefefc000].
>>
>>
>> --
>> Carlo U. Segre -- Associate Professor of Physics
>> Illinois Institute of Technology
>> Voice: 312.567.3498 Fax: 312.567.3494
>> Carlo.Segre@iit.edu http://www.iit.edu/~segre
>>
>>
>> --
>> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
>
--
Carlo U. Segre -- Associate Professor of Physics
Illinois Institute of Technology
Voice: 312.567.3498 Fax: 312.567.3494
Carlo.Segre@iit.edu http://www.iit.edu/~segre
Reply to: