Modem dials without reason
Hi there,
I configured demand dialing with diald on my machine. Now my modem dials every
five minutes without reason. I increased logging but could not find a hint why.
Does anyone know how to find the event that wants a connection ?
Another question:
When I run "route" my modem dials, but the command itself hangs. After a while
(the second or third dial) my routing table looks like this:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
194.1.1.1 * 255.255.255.255 UH 1 0 0 sl0
194.1.1.0 * 255.255.255.0 U 0 0 0 sl0
localnet * 255.255.255.0 U 0 0 0 eth0
default * 0.0.0.0 U 1 0 0 sl0
default * 0.0.0.0 U 0 0 0 ppp0
After that route works fine. The ifconfig output is the following:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:751 errors:0 dropped:0 overruns:0 frame:0
TX packets:751 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
eth0 Link encap:Ethernet HWaddr 52:54:05:DE:DB:4E
inet addr:17.10.10.1 Bcast:17.10.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:73 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
Interrupt:12 Base address:0xd800
sl0 Link encap:Serial Line IP
inet addr:192.168.0.1 P-t-P:194.1.1.1 Mask:255.255.255.0
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:3099 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
ppp0 Link encap:Point-to-Point Protocol
inet addr:212.184.131.140 P-t-P:193.158.137.77 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:9 errors:0 dropped:0 overruns:0 frame:0
TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
Collisions:0
Maybe these two questions are one.
Thanks in advance,
Klaus.
Reply to: