Re: pppd Crashes Serial Port
On Thu, 18 Nov 1999, Jeff Sciortino wrote:
jjs281 >the mouse and the modem. The jumper setting on the sportster are for
jjs281 >com2, IRQ3. The BIOS setting for serial A is com1, IRQ4.
what about the i/o ports? there still could be an i/o port conflict
on my box:
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: 16550A, Port: 0x02f8, IRQ: 3
[...I have no com3...]
/dev/ttyS3, UART: 16550A, Port: 0x02e8, IRQ: 2
com3 and com4 are dangerous to work with ..an i/o conflict can just as
easily(if not easier) to crash a machine then an irq conflict. i spent
many hours hamemring away at hardcoding my devices to make sure they are
all independent of each other. if possible set the mouse on com1 and modem
hardcode to com2 (with default i/o addresses) and see if the problem
persists..is there a reason why you are using com 3 and com4 ? i got a ups
on com2 and modem on com4 ..nothing on com1 at the moment(mouse is ps/2)
nate
----------------------------------------[mailto:aphro@aphroland.org ]--
Vice President Network Operations http://www.firetrail.com/
Firetrail Internet Services Limited http://www.aphroland.org/
Everett, WA 425-348-7336 http://www.linuxpowered.net/
Powered By: http://comedy.aphroland.org/
Debian 2.1 Linux 2.0.36 SMP http://yahoo.aphroland.org/
-----------------------------------------[mailto:aphro@netquest.net ]--
6:17pm up 91 days, 5:52, 1 user, load average: 1.57, 1.59, 1.61
Reply to: