[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: AHA2940U2W...



I've got an unofficial installation diskset for slink that's setup
specifically for the Adaptec SCSI controllers.  You can snarf it from
<http://www.debian.org/~adric/aic7xxx/slink/5.1.19/>.

Basically you'll need to boot from the diskette, but can then use the
CD as your installation media...

On Sat, Nov 06, 1999 at 03:33:20PM -0500, Daniel Ferrante wrote:
> 
> 
> 	Hi Folks,
> 
> 	Is it possible for someone to give me a help with this issue? I am
> trying to install Debian 2.1 in my machine, but I am getting a hang right
> after th CD boots...
> 
> On Sat, 6 Nov 1999, Nick Phillips wrote:
> 
> > > 	I am trying to install Debian 2.1 in my computer. I have an
> > > Adaptec 2940U2W SCSI Host adapter and Linux is hanging right after
> > > detecting it...
> > > 
> > > 	Any help?!
> > 
> > It's been a while, but so far as I remember, the 2940U2W (AIC7890) is not
> > supported by the drivers in slink (slink is about the same age as the
> > AIC7890, give or take), and you'll either need to build a kernel either with
> > the 7890 drivers patched in, or get one recent enough to support it without
> > patching.
> > 
> > Unfortunately this makes booting from the slink CD rather difficult. When
> > I did it, I installed onto an IDE disk, built a kernel to suit the 7890,
> > used cpio to copy the system over onto the SCSI drive, set LILO up, and
> > finally removed the IDE drive. If you can't manage it any other way, I'm
> > sure someone will be able to send you a boot floppy or two...
> > 
> > If anyone else has any better ideas...
> > 
> 
> 	Could somebody help me with the kernel! I don't have any means to
> install another HD and I don't have access to any Linux box around here
> (I'm pretty isolated... surronded by WinBlows...) 
> 
> 	If someone could send me the boot floppies I'd be happy to send
> them back as soon as I finish the installation, otherwise, one can attach
> the files that I need to rawrite to the floppies.
> 
> 	Thanks in advance,
> 
> 			Cheers,
> 
> 				Daniel.
> 
> __________________________________________________________________________
> Daniel Doro Ferrante              email: ferrante@barus.physics.brown.edu
> Network & System Manager	  http://latt.if.usp.br/~danieldf
> & WebMaster
> 		Physics Graduate Student - Brown University
> 	Course of Molecular Sciences - USP: http://www.cecm.usp.br
> 
> 
> 
> -- 
> Unsubscribe?  mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
> 


Reply to: