Installtion of xserver for debian 2.0
I have installed debian 2.0, but having problems installing X Window
system.
I have i740 vedio card, and it is VGA compatible. I think server for
i740 chipset is still not avaible for Debian, so i selected Unsupported
VGA compatible card during configuration. After configuration I got the
message that server has been started successfully. But it fails during
startx, please check the attached file for startx output.
Thanks,
-Rakesh
//////// startx output ////////////////
/usr/X11R6/lib/X11/xinit/xinitrc
-auth /root/.Xauthority
XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.35 i686 [ELF]
Configured drivers:
VGA16: server for 4-bit colour VGA (Patchlevel 0):
ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c,
ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
ET4000W32p_rev_d, ET6000, ET6100, et3000, ncr77c22, ncr77c22e,
ati,
sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs,
tvga8900b,
tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
3dimage985, oti067, oti077, oti087, oti037c, cl6410, cl6412,
cl6420,
cl6440, generic
MONO: server for interlaced and banked monochrome graphics adaptors
(Patchlevel 0):
hgc1280, sigmalview, apollo9, hercules
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/mouse, resolution: 100
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) VGA16: Graphics device ID: "Primary Card"
(**) VGA16: Monitor ID: "Primary Monitor"
(--) VGA16: Mode "640x480" needs hsync freq of 31.57 kHz. Deleted.
(--) VGA16: Mode "320x240" needs hsync freq of 63.15 kHz. Deleted.
(**) MONO: Graphics device ID: "Primary Card"
(**) MONO: Monitor ID: "Primary Monitor"
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/Speedo" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi"
(--) VGA16: PCI: Unknown vendor (0x8086) Unknown chipset (0x7800) rev
33, Memory @ 0xe3000000, 0xe2000000
(**) VGA16: chipset: generic
(--) VGA16: videoram: 256k (using 256k)
(**) VGA16: clocks: 25.26 28.32 25.26 25.26
(--) VGA16: Maximum allowed dot-clock: 90.000 MHz
(--) VGA16: There is no mode definition named "640x480"
(--) VGA16: Removing mode "640x480" from list of valid modes.
(--) VGA16: There is no mode definition named "320x240"
Fatal server error:
No valid modes found.
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): Server error.
////////////////////////////////////////////////////////////////
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Reply to: