Re: help with SB AWE 64 !
Sorry for sending that to the list, message directly to Marcus bounced.
----- Forwarded message from Alex Yukhimets -----
>From alexy Thu Feb 5 12:31:37 1998
Subject: Re: help with SB AWE 64 !
In-Reply-To: From "Marcus.Brinkmann@ruhr-uni-bochum.de" at "Feb 5, 98 03:56:07 pm"
To: Marcus.Brinkmann@ruhr-uni-bochum.de
Date: Thu, 5 Feb 1998 12:31:37 -0500 (EST)
From: Alex Yukhimets <aqy6633@acf5.nyu.edu>
Reply-To: aqy6633@acf5.nyu.edu
Errors-To: aqy6633@acf5.nyu.edu
X-Mailer: ELM [version 2.4ME+ PL31 (25)]
> > I installed the latest OSS-Free driver, patched with AWE extentions,
> > compiled the kernel (2.0.33), run pnpdump (ver 1.9), it failed to detect
> > all three chanels of the wavetable- I inserted them manually, all data was
> > availble from the card manual. I also had to put (WAITFORKEY) in there.
> > isapnp runs OK, module lock my computer solid.
>
> Mmmh. Please, could you provide me with all relevant conf files (including
> kernel configuration and boot messages)? I hope I am able to help you, but
> I need some more information. PLease give me also the version number of
> the OSS-Free driver, as you said you installed the "latest". Did you also
> try the standard version that ships with the 2.0.33 kernel?
>
> > I am running out of ideas. Please help...
>
> I will have ideas when I see your files, I hope. It is not the usual sort
> of problems I hear of. What Liunux version do you use? How do you compile
> and install modules?
>
> Hope I can help you,
> Marcus
>
> PS: Perhaps better to not bother the list with the conf-files, or?
Thanks, Marcus.
I already moved forward and got a bit better result. Anyway, here is a
description of the first attempt:
1)Unpack the linux-2.0.33 into the /usr/local/src directory
(linux directory created)
2)Unpack ossfree38s6-linux20x.tar.gz into the same directory.
(also goes into linux/)
3)Unpack awedrv-0.4.2d.tgz (awe-0.4.2d directory created).
4) As recommended, run make menuconfig and exit.
5) In awe-0.4.2d/, run sh ./install.sh, tell it about my
/usr/local/src/linux seems to be run OK.
6) Again make menuconfig. Here is my .config file:
#
# Automatically generated by make menuconfig: don't edit
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KERNELD=y
#
# General setup
#
# CONFIG_MATH_EMULATION is not set
CONFIG_NET=y
# CONFIG_MAX_16M is not set
CONFIG_PCI=y
CONFIG_PCI_OPTIMIZE=y
CONFIG_SYSVIPC=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_JAVA=m
CONFIG_KERNEL_ELF=y
CONFIG_M686=y
#
# Floppy, IDE, and other block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_IDE is not set
# CONFIG_BLK_DEV_HD_ONLY is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_STRIPED=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_XD=m
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_FIREWALL=y
CONFIG_NET_ALIAS=y
CONFIG_INET=y
CONFIG_IP_FORWARD=y
# CONFIG_IP_MULTICAST is not set
CONFIG_SYN_COOKIES=y
CONFIG_RST_COOKIES=y
CONFIG_IP_FIREWALL=y
# CONFIG_IP_FIREWALL_VERBOSE is not set
CONFIG_IP_MASQUERADE=y
CONFIG_IP_MASQUERADE_IPAUTOFW=y
CONFIG_IP_MASQUERADE_ICMP=y
# CONFIG_IP_TRANSPARENT_PROXY is not set
CONFIG_IP_ALWAYS_DEFRAG=y
# CONFIG_IP_ACCT is not set
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
CONFIG_IP_ALIAS=y
# CONFIG_INET_PCTCP is not set
CONFIG_INET_RARP=m
# CONFIG_NO_PATH_MTU_DISCOVERY is not set
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_AX25 is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETLINK is not set
#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_GDTH is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_DLCI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_RADIO is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_EISA=y
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_EEXPRESS_PRO100B is not set
# CONFIG_DE4X5 is not set
CONFIG_DEC_ELCP=y
# CONFIG_DGRS is not set
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set
# CONFIG_TR is not set
# CONFIG_FDDI is not set
# CONFIG_ARCNET is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_MINIX_FS=m
# CONFIG_EXT_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_XIA_FS is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_UMSDOS_FS is not set
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
# CONFIG_ROOT_NFS is not set
# CONFIG_SMB_FS is not set
CONFIG_ISO9660_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_UFS_FS is not set
#
# Character devices
#
CONFIG_SERIAL=y
# CONFIG_DIGI is not set
# CONFIG_CYCLADES is not set
# CONFIG_STALDRV is not set
# CONFIG_RISCOM8 is not set
CONFIG_PRINTER=y
# CONFIG_SPECIALIX is not set
CONFIG_MOUSE=y
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_UMISC is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_FTAPE is not set
# CONFIG_APM is not set
# CONFIG_WATCHDOG is not set
# CONFIG_RTC is not set
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_PAS is not set
CONFIG_SB=y
CONFIG_ADLIB=y
# CONFIG_GUS is not set
# CONFIG_MPU401 is not set
# CONFIG_PSS is not set
# CONFIG_GUS16 is not set
# CONFIG_GUSMAX is not set
# CONFIG_MSS is not set
# CONFIG_SSCAPE is not set
# CONFIG_TRIX is not set
# CONFIG_MAD16 is not set
# CONFIG_CS4232 is not set
# CONFIG_MAUI is not set
# CONFIG_OPL3SA1 is not set
# CONFIG_SOFTOSS is not set
CONFIG_YM3812=y
SBC_BASE=220
SBC_IRQ=5
SBC_DMA=1
SB_DMA2=5
SB_MPU_BASE=330
SB_MPU_IRQ=-1
CONFIG_LOWLEVEL_SOUND=y
# CONFIG_ACI_MIXER is not set
CONFIG_AWE32_SYNTH=y
# CONFIG_AEDSP16 is not set
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
After make-kpkg, dpkg -i, and reboot everything's OK.
/etc/isapnp.config:
# $Id: pnpdump.c,v 1.8 1997/01/14 21:05:35 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER
#
# Trying port address 0203
# Board 1 has serial identifier dc 18 8b b5 e1 e4 00 8c 0e
# (DEBUG)
(READPORT 0x0203)
(ISOLATE)
(IDENTIFY *)
# Card 1: (serial identifier dc 18 8b b5 e1 e4 00 8c 0e)
# CTL00e4 Serial No 411809249 [checksum dc]
# Version 1.0, Vendor version 1.0
# ANSI string -->Creative SB AWE64 PnP<--
# Vendor defined tag: 73 02 45 20
#
# Logical device id CTL0045
(CONFIGURE CTL00e4/411809249 (LD 0
# ANSI string -->Audio<--
(INT 0 (IRQ 5 (MODE +E)))
(DMA 0 (CHANNEL 1))
(DMA 1 (CHANNEL 5))
(IO 0 (BASE 0x0220))
(IO 1 (BASE 0x0330))
(IO 2 (BASE 0x0388))
(ACT Y)
))
#
# Logical device id CTL7002
#(CONFIGURE CTL00e4/411809249 (LD 1
# Compatible device id PNPb02f
# ANSI string -->Game<--
# (IO 0 (BASE 0x0200))
#(CONFIGURE CTL00e4/411809249 (LD 1
# Compatible device id PNPb02f
# ANSI string -->Game<--
# (IO 0 (BASE 0x0200))
# (ACT Y)
#))
#
# Logical device id CTL0022
#
(CONFIGURE CTL00e4/411809249 (LD 2
# ANSI string -->WaveTable<--
(IO 0 (BASE 0x0620))
(IO 0 (BASE 0x0A20))
(IO 0 (BASE 0x0E20))
(ACT Y)
))
# End tag... Checksum 0x00 (OK)
(WAITFORKEY)
"isapnp /etc/isapnp.conf" runs OK.
"modprobe -a sound" locks the machine.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Here is another story:
Using debian kernel-source-2.0.32 and awe-drv 0.3.3c, the only thing I
try to do is to change to /usr/src/awedrv/ and run "sh ./install.sh".
It gives me error message: (just for the record, I'm using patch 2.5)
Linux source root directory [/usr/src/linux]
checking the version of installed sound driver..
sound driver is OSS/Free-3.5.0 (aka USS/Lite)
applying a patch to lowlevel directory
patching file `Makefile'
Hunk #1 succeeded at 101 with fuzz 2 (offset 95 lines).
can't find file to patch at input line 17
Perhaps you should have used the -p or --strip option?
The text leading up to this was:
--------------------------
|*** drivers/sound/lowlevel/init.c.old Tue May 28 23:45:17 1996
|--- drivers/sound/lowlevel/init.c Wed Oct 30 21:02:02 1996
--------------------------
File to patch:
So, I edit install.sh and change patch -d ... < ...
to patch -d ... -p0 < ...
After that sh ./install.sh runs fine. "make menuconfig" produces the
following: (now only sound part, the rest is the same as before)
#
CONFIG_SOUND=m
# CONFIG_PAS is not set
CONFIG_SB=y
CONFIG_ADLIB=y
# CONFIG_GUS is not set
# CONFIG_MPU401 is not set
# CONFIG_UART6850 is not set
# CONFIG_PSS is not set
# CONFIG_GUS16 is not set
# CONFIG_GUSMAX is not set
# CONFIG_MSS is not set
# CONFIG_SSCAPE is not set
# CONFIG_TRIX is not set
# CONFIG_MAD16 is not set
# CONFIG_CS4232 is not set
# CONFIG_MAUI is not set
CONFIG_AUDIO=y
CONFIG_MIDI=y
CONFIG_YM3812=y
SBC_BASE=220
SBC_IRQ=5
SBC_DMA=1
SB_DMA2=5
SB_MPU_BASE=330
SB_MPU_IRQ=-1
DSP_BUFFSIZE=65536
CONFIG_LOWLEVEL_SOUND=y
# CONFIG_ACI_MIXER is not set
CONFIG_AWE32_SYNTH=y
#
# Kernel hacking
#
# CONFIG_PROFILE is not set
After recompiling, installing, and rebooting, "modprobe -a sound"
does NOT lock the machine, but gives me no message at all.
(modprobe -a sound trace_init=1 is ALSO silent).
cat /dev/sndstat gives:
Sound Driver:3.5.4-960630 (Wed Feb 4 22:57:11 EST 1998 root,
Linux jessica 2.0.32 #1 Wed Feb 4 22:30:07 EST 1998 i686 unknown)
Kernel: Linux jessica 2.0.32 #1 Wed Feb 4 22:57:29 EST 1998 i686
Config options: 0
Installed drivers:
Type 1: OPL-2/OPL-3 FM
Type 2: Sound Blaster
Type 7: SB MPU-401
Card config:
Sound Blaster at 0x220 irq 5 drq 1,5
SB MPU-401 at 0x330 irq 5 drq 0
OPL-2/OPL-3 FM at 0x388 drq 0
Audio devices:
0: Sound Blaster 16 (4.16)
Synth devices:
0: Yamaha OPL-3
Midi devices:
0: Sound Blaster 16
Timers:
0: System clock
Mixers:
0: Sound Blaster
As you see, not a trace of AWE.
I can play CDs now ...
Thanks a lot.
Alex Y.
--
_
_( )_
( (o___ +-------------------------------------------+
| _ 7 | Alexander Yukhimets |
\ (") | http://pages.nyu.edu/~aqy6633/ |
/ \ \ +-------------------------------------------+
----- End of forwarded message from Alex Yukhimets -----
--
_
_( )_
( (o___ +-------------------------------------------+
| _ 7 | Alexander Yukhimets |
\ (") | http://pages.nyu.edu/~aqy6633/ |
/ \ \ +-------------------------------------------+
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: