[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

webcam ile Tv kartı



Merhabalar
Boot ederken webcamin kablosunu taktığımda xawtv ile webcamden görüntü alabiliyorum fakat Tv kartımı çalıştıramıyorum , Tvtime ile de denediğimde sinyal yok diyor ve video kaynağını değiştiremiyorum. (xawtv'de de değiştiremiyorum). Usb kabloyu takmadan boot ettiğimde ise Tv izleyebiliyorum fakat bu seferde webcam çalışmıyor. http://ovcam.org/ov511/install.html Linktekine göre baktığımda benim zaten /dev/video1 var.
crw-rw----   1 root video    81,   0 2005-02-26 08:43 video0
crw-rw----   1 root video    81,   1 2005-02-26 08:43 video1
Bu çatışmayı nasıl düzeltebilirim.
Saygılar

signorelli@debian:~$ dmesg | grep ov511
/usr/src/ov511-2.30/ovcamchip_core.c: v2.30 : OV camera chip I2C driver
/usr/src/ov511-2.30/ov511_core.c: USB OV518 video device found
/usr/src/ov511-2.30/ov511_core.c: Device revision 1
/usr/src/ov511-2.30/ov511_core.c: Compression required with OV518...enabling
/usr/src/ov511-2.30/ovcamchip_core.c: Camera chip is an OV6630AF
/usr/src/ov511-2.30/ov511_core.c: Device at usb-0000:00:1d.2-2 registered to minor 0
usbcore: registered new driver ov511
/usr/src/ov511-2.30/ov511_core.c: v2.30 : ov511 USB Camera Driver (V4L2 disabled)
signorelli@debian:~$

signorelli@debian:~$ dmesg | grep tv
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:02:0a.0, irq: 177, latency: 64, mmio: 0xfbefe000 bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003
bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00847ff3 [init]
bttv0: Avermedia eeprom[0x4811]: tuner=5 radio:yes remote control:yes
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video1
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
signorelli@debian:~$










Reply to: